From: Kautzmann Gerd (gkautzmann@baumerident.com)
Date: Tue Jan 14 2003 - 09:54:55 CET
> > "Now I would like to configure my PCMCIA, so I can use my moden to
> > connect to internet."
> >
> > As long as the pcmcia is the ethernet card and you use an
> external AT
> > modem it should be possible.
> >
> > If your modem is on a pcmcia card and if it is a 'winmodem' .....
> > forget it.
> >
>
>
> I have tried the options above, but so far without success
> (the modem card is no 'winmodem')
> When I configure eth0, I receive the following message:
Some questions remain (will still don't know what type of card your PCMCIA
is).
Please fill out:
[ ] the PCMCIA card you want to install is an ethernet card
[ ] the PCMCIA card you want to install is a modem card
[ ] the PCMCIA card you want to install is an ethernet / modem combi card
[ ] the build in modem is handled like a com Port in the PC BIOS
[ ] the modem accepts AT commands (open a terminal on com(1/2/3/4) and type
ATZ the answere should be 'OK' )
[ ] you want to use the build in Ethernet device
[ ] You want to use the buil in modem device
> Kind regards,
>
> Jeroen Sangers
>
> www.jeroensangers.com
> www.fimcap.org
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: mulinux-unsubscribe@sunsite.dk
> For additional commands, e-mail: mulinux-help@sunsite.dk
>
---------------------------------------------------------------------
To unsubscribe, e-mail: mulinux-unsubscribe@sunsite.dk
For additional commands, e-mail: mulinux-help@sunsite.dk
This archive was generated by hypermail 2.1.6 : Sat Feb 08 2003 - 15:27:23 CET