Re: [oc] compactflash/PCCARD-Interface

[Vic <vikrantps@yahoo.com>]

Please do so. I am working in vhdl. Hence also
interested in learning more about interfacing Compact
Flash card with FPGAs.

thanks,
Vic.
--- Henchinski <kaliski@bezeqint.net> wrote:
> In my previous project, we mapped the CompactFlash
> Card on the CPU (
> StrongArm ) Memeory address
> we used an FPGA to do some basic translation, no
> memeory was needed, just
> the some control signals
> were generated and it works
> 
> If  you would like the code I will attach it
> 
> Y
> 
> 
> ----- Original Message ----- 
> From: <scyx@directbox.com>
> To: <cores@opencores.org>
> Sent: Friday, August 01, 2003 9:05 PM
> Subject: [oc] compactflash/PCCARD-Interface
> 
> 
> > I'm looking for an interface for producing a
> PCCARD or CompactFlash-
> > Card. Many vhdl-implemention for Host-Interfaces I
> found. But nothing
> > for the cardside-Interface.
> > Maybe the best solution is a cardinterface which
> included some memory
> > (appr. 2048 bit) and my hardware has access to
> this memory.
> > Host (reading/writing) -> PCCARD ->Memory(on card)
> <- my vhdl-code
> > (reading/writing)
> > Anybody has some ideas?
> > thanx
> > --
> > To unsubscribe from cores mailing list please
> visit
> http://www.opencores.org/mailinglists.shtml
> 
> --
> To unsubscribe from cores mailing list please visit
http://www.opencores.org/mailinglists.shtml


__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com
--
To unsubscribe from cores mailing list please visit http://www.opencores.org/mailinglists.shtml