[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [pci] run simulation problems
Hello guys!
I'm sorry about that!
The script run_pci_sim.scr is out of date.
Also the README.txt file is out of date, saying that you run the simulation
with this script.
The script you must run is run_pci_sim_regr.scr
I think the usage is described in a design document.
If not or you still have problems, send another email.
I'll get rid of this files ASAP.
Regards,
Miha Dolenc
----- Original Message -----
From: "Ines Khelifi" <ikhelifi@vt.edu>
To: <pci@opencores.org>
Sent: Wednesday, July 24, 2002 5:58 PM
Subject: [pci] run simulation problems
> Hi all
>
> I just suscribed to this listserv, so I am not sure about all the
previous
> messages that we sent out about my problem.
> I downloaded the PCI core testbench, and tried to run a simulation with :
> run_pci_sim.scr, but this is what I get:
> ncvlog: v3.20.(p1): (c) Copyright 1995 - 2000 Cadence Design Systems, Inc.
> file: ../../../rtl/verilog/pci_parity_check.v
> module worklib.PCI_PARITY_CHECK:v
> errors: 0, warnings: 0
> file: ../../../rtl/verilog/pci_target_unit.v
> module worklib.PCI_TARGET_UNIT:v
> errors: 0, warnings: 0
> file: ../../../rtl/verilog/wb_addr_mux.v
> module worklib.WB_ADDR_MUX:v
> errors: 0, warnings: 0
> file: ../../../rtl/verilog/cbe_en_crit.v
> module worklib.CBE_EN_CRIT:v
> errors: 0, warnings: 0
> file: ../../../rtl/verilog/fifo_control.v
> module worklib.FIFO_CONTROL:v
> errors: 0, warnings: 0
> file: ../../../rtl/verilog/out_reg.v
> module worklib.OUT_REG:v
> errors: 0, warnings: 0
> file: ../../../rtl/verilog/pci_tpram.v
> module worklib.PCI_TPRAM:v
> errors: 0, warnings: 0
> file: ../../../rtl/verilog/wb_master.v
> module worklib.WB_MASTER:v
> errors: 0, warnings: 0
> file: ../../../rtl/verilog/conf_cyc_addr_dec.v
> module worklib.CONF_CYC_ADDR_DEC:v
> errors: 0, warnings: 0
> file: ../../../rtl/verilog/frame_crit.v
> module worklib.FRAME_CRIT:v
> errors: 0, warnings: 0
> file: ../../../rtl/verilog/pci_target32_clk_en.v
> module worklib.PCI_TARGET32_CLK_EN:v
> errors: 0, warnings: 0
> file: ../../../rtl/verilog/pciw_fifo_control.v
> module worklib.PCIW_FIFO_CONTROL:v
> errors: 0, warnings: 0
> file: ../../../rtl/verilog/wb_slave.v
> module worklib.WB_SLAVE:v
> errors: 0, warnings: 0
> file: ../../../rtl/verilog/conf_space.v
> module worklib.CONF_SPACE:v
> errors: 0, warnings: 0
> file: ../../../rtl/verilog/frame_en_crit.v
> module worklib.FRAME_EN_CRIT:v
> errors: 0, warnings: 0
> file: ../../../rtl/verilog/par_crit.v
> module worklib.PAR_CRIT:v
> errors: 0, warnings: 0
> file: ../../../rtl/verilog/pciw_pcir_fifos.v
> module worklib.PCIW_PCIR_FIFOS:v
> errors: 0, warnings: 0
> file: ../../../rtl/verilog/wb_slave_unit.v
> module worklib.WB_SLAVE_UNIT:v
> errors: 0, warnings: 0
> file: ../../../rtl/verilog/frame_load_crit.v
> module worklib.FRAME_LOAD_CRIT:v
> errors: 0, warnings: 0
> file: ../../../rtl/verilog/pci_bridge32.v
> module worklib.PCI_BRIDGE32:v
> errors: 0, warnings: 0
> file: ../../../rtl/verilog/pci_target32_devs_crit.v
> module worklib.PCI_TARGET32_DEVS_CRIT:v
> errors: 0, warnings: 0
> file: ../../../rtl/verilog/perr_crit.v
> module worklib.PERR_CRIT:v
> errors: 0, warnings: 0
> file: ../../../rtl/verilog/wbr_fifo_control.v
> module worklib.WBR_FIFO_CONTROL:v
> errors: 0, warnings: 0
> file: ../../../rtl/verilog/cur_out_reg.v
> module worklib.CUR_OUT_REG:v
> errors: 0, warnings: 0
> file: ../../../rtl/verilog/pci_decoder.v
> module worklib.PCI_DECODER:v
> errors: 0, warnings: 0
> file: ../../../rtl/verilog/pci_target32_interface.v
> module worklib.PCI_TARGET32_INTERFACE:v
> errors: 0, warnings: 0
> file: ../../../rtl/verilog/perr_en_crit.v
> module worklib.PERR_EN_CRIT:v
> errors: 0, warnings: 0
> file: ../../../rtl/verilog/wbw_fifo_control.v
> module worklib.WBW_FIFO_CONTROL:v
> errors: 0, warnings: 0
> file: ../../../rtl/verilog/decoder.v
> module worklib.DECODER:v
> errors: 0, warnings: 0
> file: ../../../rtl/verilog/pci_in_reg.v
> module worklib.PCI_IN_REG:v
> errors: 0, warnings: 0
> file: ../../../rtl/verilog/serr_crit.v
> module worklib.SERR_CRIT:v
> errors: 0, warnings: 0
> file: ../../../rtl/verilog/wbw_wbr_fifos.v
> module worklib.WBW_WBR_FIFOS:v
> errors: 0, warnings: 0
> file: ../../../rtl/verilog/delayed_sync.v
> module worklib.DELAYED_SYNC:v
> errors: 0, warnings: 0
> file: ../../../rtl/verilog/irdy_out_crit.v
> module worklib.IRDY_OUT_CRIT:v
> errors: 0, warnings: 0
> file: ../../../rtl/verilog/pci_io_mux.v
> module worklib.PCI_IO_MUX:v
> errors: 0, warnings: 0
> file: ../../../rtl/verilog/pci_io_mux_ad_en_crit.v
> module worklib.PCI_IO_MUX_AD_EN_CRIT:v
> errors: 0, warnings: 0
> file: ../../../rtl/verilog/pci_io_mux_ad_load_crit.v
> module worklib.PCI_IO_MUX_AD_LOAD_CRIT:v
> errors: 0, warnings: 0
> file: ../../../rtl/verilog/pci_target32_sm.v
> module worklib.PCI_TARGET32_SM:v
> errors: 0, warnings: 0
> file: ../../../rtl/verilog/serr_en_crit.v
> module worklib.SERR_EN_CRIT:v
> errors: 0, warnings: 0
> file: ../../../rtl/verilog/delayed_write_reg.v
> module worklib.DELAYED_WRITE_REG:v
> errors: 0, warnings: 0
> file: ../../../rtl/verilog/mas_ad_en_crit.v
> module worklib.MAS_AD_EN_CRIT:v
> errors: 0, warnings: 0
> file: ../../../rtl/verilog/mas_ad_load_crit.v
> module worklib.MAS_AD_LOAD_CRIT:v
> errors: 0, warnings: 0
> file: ../../../rtl/verilog/pci_master32_sm.v
> module worklib.PCI_MASTER32_SM:v
> errors: 0, warnings: 0
> file: ../../../rtl/verilog/pci_target32_stop_crit.v
> module worklib.PCI_TARGET32_STOP_CRIT:v
> errors: 0, warnings: 0
> file: ../../../rtl/verilog/synchronizer_flop.v
> module worklib.synchronizer_flop:v
> errors: 0, warnings: 0
> file: ../../../rtl/verilog/async_reset_flop.v
> module worklib.async_reset_flop:v
> errors: 0, warnings: 0
> file: ../../../rtl/verilog/mas_ch_state_crit.v
> module worklib.MAS_CH_STATE_CRIT:v
> errors: 0, warnings: 0
> file: ../../../rtl/verilog/pci_master32_sm_if.v
> module worklib.PCI_MASTER32_SM_IF:v
> errors: 0, warnings: 0
> file: ../../../rtl/verilog/pci_target32_trdy_crit.v
> module worklib.PCI_TARGET32_TRDY_CRIT:v
> errors: 0, warnings: 0
> file: ../../../rtl/verilog/top.v
> module worklib.TOP:v
> errors: 0, warnings: 0
> file: ../../../rtl/verilog/pci_rst_int.v
> module worklib.PCI_RST_INT:v
> errors: 0, warnings: 0
> file: ../../../rtl/verilog/sync_module.v
> module worklib.SYNC_MODULE:v
> errors: 0, warnings: 0
> file: ../../../rtl/verilog/wb_tpram.v
> module worklib.WB_TPRAM:v
> errors: 0, warnings: 0
> ncvlog: v3.20.(p1): (c) Copyright 1995 - 2000 Cadence Design Systems, Inc.
> file: ../../../bench/verilog/wb_master32.v
> module worklib.WB_MASTER32:v
> errors: 0, warnings: 0
> file: ../../../bench/verilog/wb_master_behavioral.v
> module worklib.WB_MASTER_BEHAVIORAL:v
> errors: 0, warnings: 0
> file: ../../../bench/verilog/system.v
> module worklib.SYSTEM:v
> errors: 0, warnings: 0
> file: ../../../bench/verilog/pci_blue_arbiter.v
> module worklib.pci_blue_arbiter:v
> errors: 0, warnings: 0
> file: ../../../bench/verilog/pci_bus_monitor.v
> module worklib.pci_bus_monitor:v
> errors: 0, warnings: 0
> file: ../../../bench/verilog/pci_behaviorial_device.v
> module worklib.pci_behaviorial_device:v
> errors: 0, warnings: 0
> module worklib.delayed_test_pad:v
> errors: 0, warnings: 0
> file: ../../../bench/verilog/pci_behaviorial_master.v
> module worklib.pci_behaviorial_master:v
> errors: 0, warnings: 0
> file: ../../../bench/verilog/pci_behaviorial_target.v
> module worklib.pci_behaviorial_target:v
> errors: 0, warnings: 0
> file: ../../../bench/verilog/wb_slave_behavioral.v
> module worklib.WB_SLAVE_BEHAVIORAL:v
> errors: 0, warnings: 0
> file: ../../../bench/verilog/wb_bus_mon.v
> module worklib.WB_BUS_MON:v
> errors: 0, warnings: 0
> file: ../../../bench/verilog/pci_behavioral_iack_target.v
> module worklib.PCI_BEHAVIORAL_IACK_TARGET:v
> errors: 0, warnings: 0
> file: ../../../bench/verilog/pci_unsupported_commands_master.v
> module worklib.pci_unsupported_commands_master:v
> errors: 0, warnings: 0
> run_pci_sim.scr: [[: not found
> run_pci_sim.scr: [[: not found
> run_pci_sim.scr: [[: not found
> ncsim: v3.20.(p1): (c) Copyright 1995 - 2000 Cadence Design Systems, Inc.
> ncsim: *F,NOSNAP: snapshot 'worklib.bridge32:fun' does not exist in the
> libraries.
>
> I don't know anything about Verilog and ncsim, so I am not sure what that
> means. Any help would be appreciated.
> Thank you
> ines
>
> --
> To unsubscribe from pci mailing list please visit
http://www.opencores.org/mailinglists.shtml
--
To unsubscribe from pci mailing list please visit http://www.opencores.org/mailinglists.shtml