Re: [openrisc] Development board

["Damjan Lampret" <lampret@opencores.org>]

Mark,

I personally would use it if I wanted a low cost, simple board. Sure you can
have code in flash, of course needs to be properly linked so you don't have
data in flash. You also have SRAM so you can take time before start using
DDR.

regards,
Damjan

----- Original Message -----
From: <mrmclean@cablespeed.com>
To: <openrisc@opencores.org>
Sent: Monday, April 14, 2003 3:18 PM
Subject: Re: [openrisc] Development board


> All,
> I checked out the microblaze development board at Insight. It looks
> pretty good, except it's memory configuration may be hard to convert to
> OR1200. It has a 2MBX32 flash, 256KX32 SRAM, 2MB X 16 DDR. I'm not
> sure if it would be possible to run the instructions from the flash and
> connect the data to the SDRAM - does this sound like the best way to
> use the board?
>
> Here is the link
> http://www.insightelectronics.com.au/products/xilinx/microblaze_kit.htm
>
> Mark
>
> ----- Original Message -----
> From: youwenyi@a...
> To: openrisc@o...
> Date: Sun, 13 Apr 2003 22:45:36 -0100
> Subject: Re: [openrisc] Development board
>
> >
> >
> > Hi,
> >
> > I heard Avnet and Insight also provide FPGA boards. But I don't
> > know whether any one has used those boards to run the Openrisc.
> > Can any body comments on boards from Avnet and Insight?
> >
> >
> > youwen
> >
> >
> > ----- Original Message -----
> > From: "Damjan Lampret" <lampret@o... >
> > To: <openrisc@o... >
> > <dan.gunders@f... >
> > Date: Fri, 11 Apr 2003 11:42:34 -0700
> > Subject: Re: [openrisc] Development board
> >
> > >
> > >
> > > Mark (and others),
> > >
> > > yes Dan Gunders is the right person to talk if you want to get
> > > Flextronics
> > > Development Board. The one shown on or1k web pages. I copy Dan
> > > Gunders so
> > > you can have his email.
> > >
> > > I also heard people are using
> > http://www.sundance.com/default.asp
> > > boards.
> > >
> > > regards,
> > > Damjan
> > >
> > > ----- Original Message -----
> > > From: <Mrmclean@c... >
> > > To: <openrisc@o... >
> > > Sent: Wednesday, April 09, 2003 12:11 PM
> > > Subject: [openrisc] Development board
> > >
> > >
> > > > Damjan,
> > > > I talked with Alex Cunningham today, he said I need to
> > talk to
> > > Dan
> > > > Gunders. I Have his email and will email Dan tonight.
> > Alex
> > > wasn't sure
> > > > what to charge for the board, and was concerned about
> > support.
> > > I told
> > > > him I didnt need support once it was delivered. Is there
> > > another person I
> > > > should contact or is Dan who I need to talk to? Have you
> > set a
> > > price for
> > > > the board? Thanks for the help.
> > > >
> > > > Mark McLean
> > > > mrmclean@c...
> > > > 410 518-6565 (US)
> > > >
> > > >
> > >
> >
> --
> To unsubscribe from openrisc mailing list please visit
http://www.opencores.org/mailinglists.shtml
>

--
To unsubscribe from openrisc mailing list please visit http://www.opencores.org/mailinglists.shtml