RE: [openrisc] Development board

["Michael Scott" <mike.scott@jennic.com>]

Hi,
   We are currenlty using Avnet ADS-XLS-DEV-XE4000 development board
to run the OpenRisc.  The board is dsesigned to sit in a PC using
the PCI interface. So to make life easier the instruction & data RAM (inside
FPGA)
is 32K Dualport so we download the program code over the PCI
connected to one port & the core is connected to other port
a PCI write to a register brings the core out of reset and execution begins
At any time we can halt the processor, download new code and restart.

The board also has 128MB external SRAM & 16MB Flash which could also be used

Regards,

Mike Scott

___________________________________________________
Jennic Ltd, Furnival Street, Sheffield, S1 4QT,  UK
www.jennic.com  Tel: +44 (0) 114 2812655   Confidential
___________________________________________________



-----Original Message-----
From: owner-openrisc@opencores.org
[mailto:owner-openrisc@opencores.org]On Behalf Of youwenyi@attbi.com
Sent: 14 April 2003 00:46
To: openrisc@opencores.org
Subject: Re: [openrisc] Development board


Hi,

I heard Avnet and Insight also provide FPGA boards. But I don't
know whether any one has used those boards to run the Openrisc.
Can any body comments on boards from Avnet and Insight?


youwen


----- Original Message -----
From: "Damjan Lampret" <lampret@o... >
To: <openrisc@o... >
<dan.gunders@f... >
Date: Fri, 11 Apr 2003 11:42:34 -0700
Subject: Re: [openrisc] Development board

>
>
> Mark (and others),
>
> yes Dan Gunders is the right person to talk if you want to get
> Flextronics
> Development Board. The one shown on or1k web pages. I copy Dan
> Gunders so
> you can have his email.
>
> I also heard people are using http://www.sundance.com/default.asp
> boards.
>
> regards,
> Damjan
>
> ----- Original Message -----
> From: <Mrmclean@c... >
> To: <openrisc@o... >
> Sent: Wednesday, April 09, 2003 12:11 PM
> Subject: [openrisc] Development board
>
>
> > Damjan,
> > I talked with Alex Cunningham today, he said I need to talk to
> Dan
> > Gunders. I Have his email and will email Dan tonight. Alex
> wasn't sure
> > what to charge for the board, and was concerned about support.
> I told
> > him I didnt need support once it was delivered. Is there
> another person I
> > should contact or is Dan who I need to talk to? Have you set a
> price for
> > the board? Thanks for the help.
> >
> > Mark McLean
> > mrmclean@c...
> > 410 518-6565 (US)
> >
> >
>
--
To unsubscribe from openrisc mailing list please visit
http://www.opencores.org/mailinglists.shtml

--
To unsubscribe from openrisc mailing list please visit http://www.opencores.org/mailinglists.shtml