I M P O R T A N T On HP-UX-11.x the maximal data size (allocated data) of a 32 bit program is 64 MB. One solution is to build a 64 bit binary, for those the default process memory limit is 1 GB. 64bit binaries can be created with cc +DA2.0w cc +DD64 if you have the HP C-ANSI-C compiler. To compile in 64 bit mode, first call ./.clean then call make COPTX=+DD64 LDOPTX=+DD64 make COPTX=+DD64 LDOPTX=+DD64 install If you have an older GNU gcc, you need a 64bit compiled gcc. Older GNU gcc versions are not capable of switching, so you need a separate compiler installation for either: l1:/u/usr/merijn 102 > file /usr/local/pa*/bin/gcc /usr/local/pa20_32/bin/gcc: PA-RISC2.0 shared executable dynamically linked -not stripped /usr/local/pa20_64/bin/gcc: ELF-64 executable object file - PA-RISC 2.0 (LP64) l1:/u/usr/merijn 103 > With a newer GCC, you may call ./.clean then call: make COPTX=-mlp64 LDOPTX=-mlp64 make COPTX=-mlp64 LDOPTX=-mlp64 install The other way is to alter some kernel parameters which require a reboot. The default kernel parameter seem to look like: Kernel param. Value maxdsiz 67108864 maxdsiz_64bit 1073741824 maxfiles 200 maxfiles_lim 2048 maxssiz 8388608 maxssiz_64bit 8388608 maxswapchunks 3250 maxtsiz 67108864 maxtsiz_64bit 1073741824 The important one is maxdsiz, 64 MB is the default and it is rather low. There is some information page at http://www.uwsg.iu.edu/hp/hpux-tune.html#maxdsiz and they recommend to increase it to 1.9 GB. Sounds extreme. At http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0x08afe7613948d5118fef0090279cd0f9,00.html they recommend 500 MB. maxssiz shouldn't be a problem either since it has to do with swap and such as storing arrays and recursion etc. If you like to know how to create 64 bit binaries on Solaris, please read README.compile. I hope this helps. If you found the right way for HP-UX, please send me a mail. The Schily makefile system usually should be able to find the best C-compiler on HP-UX automatically. If it does not work, here is a way force to use a different compiler. You may compile with the HP ANSI C-Compiler using: make CCOM=cc To compile with the free K&R C-compiler call: gmake CCOM=cc 'COPTS= ' or smake CCOM=cc 'COPTS= ' /*--------------------------------------------------------------------------*/ HP-UX SCSI hints: Note that there are no device nodes for userland SCSI on HP-UX, you have to call the included shell script MKNOD.hpux first. If you own a HP-9000-800 series machine, you need to install the file MKNOD.hpux-800 in the /etc init shell script directory in order to call it after each boot. This script will create the files in /dev/scsi/... and /dev/rscsi/... The permissions will be set to read/write for root only. HP does not handle CD-ROMs as well as it should. On the HP have a look at the man pages for pfs pfsd pfs_mount and anymore that they refer too. /*--------------------------------------------------------------------------*/ From: H.Merijn Brand Amsterdam Perl Mongers (http://amsterdam.pm.org/) As of Jun 2002, there are some patches available to HP-UX 11.00 and 11i that prevent the need for pfs, and these are highly recommended, since Rock-Ridge extensions are now supported from the kernel level. For 11.00: a5:/ 103 # swlist | grep -i rock PHCO_26449 1.0 Add Rock Ridge extension to mount_cdfs(1M) PHKL_26448 1.0 Y2k; Rock Ridge extension for ISO-9660 PHKL_26450 1.0 Rock Ridge extension for ISO-9660 a5:/ 104 # PHKL_26448 is not recommended, but I never had any trouble with it. I still have to install PHKL_28060 over PHKL_26448 PHKL_28060 1.0 Y2k; Rock Ridge extension for ISO-9660 For 11i: PHKL_28025 1.0 Rock Ridge extension for ISO-9660 PHKL_26269 1.0 Rock Ridge extension for ISO-9660 PHCO_25841 1.0 Add Rock Ridge extension to mount_cdfs(1M) I don't have 11i (yet), so I got this from HP-UX' patch database. The problem is that they did /not/ enable RR by default, but made it a mount option. D'uh! But you can add it in /etc/fstab, and never worry again :) a5:/ 104 # grep cd /etc/fstab /dev/cd0 /cdrom cdfs ro,rr,noauto 0 0 a5:/ 105 #