From: Karl-Heinz Zimmer (khz@stardivision.de)
Date: Thu Apr 22 1999 - 21:37:14 CEST
Hallo Jens,
das ist vermutlich nicht gerade das, was Du wissen wolltest, doch nach
den frustrierenden Meldungen der anderen, eifrigen
Mailinglist-Teilnehmer hab' ich mich mal nach einer
Aufruestmoeglichkeit umgesehen...
Kingston bietet RAM fuer Compaq Rechner hier an:
http://www.kingston.com/catalog/memory/cpq-idx.htm
Viel Erfolg,
Karl-Heinz
[english]
I mentioned the possibility to enhance the Laptop's RAM...
>>>>>>>>>>>>>>>>>> Ursprüngliche Nachricht <<<<<<<<<<<<<<<<<<
Am 20.04.1999, 11:06:35, schrieb Jens Puruckherr <puru@elbvilla.de> zum
Thema Install-Problems:
> Hi!
> I've got some problems installing mulinux on a Compaq 386SX20 Laptop;
> 2MB Ram bulit in; 4MBRam PCMCIA; 60MB HD inkl Dockingstation with eth0
> and CDROM. It's no problem to boot from startdisk and install the
image
> in ramdisk. To unpack the /usr needs ca. 1 hour (normal?).
> It's possible to login as root and have a look at the dirtree. But
now:
> "Clone" starts, but I get only the message "cannot fork". If I start
> fdisk manually, I get the same massage. What does it mean? Its not
> possible to create any partition or format an existing.
> I've tried with creating partitions under DOS and with no partitions.
On
> Install I've no defined/have defined any swap-partition. The kernel
> detects the Hardware (RAM,HD,CDROM) fine at start, there should be no
> problem. What else can I do?
> Thanks
> Jens Puruckherr
> Sorry, my english is not so good.....:-(
This archive was generated by hypermail 2.1.6 : Sat Feb 08 2003 - 15:27:11 CET