# Please make this file available to others
# by sending it to <lirc@bartelmus.de>
#
# this config file was automatically generated
# using lirc-0.9.0-pre1(default) on Tue Oct  8 07:05:38 2013
#
# contributed by
#
# brand:               /home/pi/lircd.conf
# model no. of remote control:
# devices being controlled by this remote:
#

begin remote

  name  /home/pi/lircd.conf
  bits           16
  flags SPACE_ENC|CONST_LENGTH
  eps            30
  aeps          100

  header       9006  4447
  one           594  1648
  zero          594   526
  ptrail        587
  repeat       9006  2210
  pre_data_bits   16
  pre_data       0xFD
  gap          107633
  toggle_bit_mask 0x0

      begin codes
          KEY_1                    0x08F7
          KEY_2                    0x8877
          KEY_3                    0x48B7
          KEY_4                    0x28D7
          KEY_5                    0xA857
          KEY_6                    0x6897
          KEY_7                    0x18E7
          KEY_8                    0x9867
          KEY_9                    0x58A7
          KEY_0                    0x30CF
          KEY_DOWN                 0xB04F
          KEY_LEFT                 0x10EF
          KEY_UP                   0xA05F
          KEY_RIGHT                0x50AF
          KEY_BACK                 0x708F
          KEY_ENTER                0x906F
          KEY_SETUP                0x20DF
          KEY_PAUSE                0x609F
          KEY_PAUSE                0x807F
          KEY_STOP                 0x609F
          KEY_VOLUMEUP             0x40BF
          KEY_VOLUMEDOWN           0x00FF
      end codes

end remote