Pine Technical Notes Version 4.64, September 2005 _Pine_ and _Pico_ are trademarks of the University of Washington. No commercial use of these trademarks may be made without prior written permission of the University of Washington. Pine, Pico and Pilot Copyright 1989-2005 University of Washington. Additional legal notices are at the web URL http://www.washington.edu/pine/legal. Table of Contents Introduction * Design Goals * Pine Components Background Details * Domain Names * RFC 822 Compliance * SMTP and Sendmail * Internet Message Access Protocol (IMAP) * Multipurpose Internet Mail Extensions (MIME) * Folder Collections Building and Installation * Compile-time Options * Including LDAP Functionality * Including Kerberos 5 Functionality * Pine Compile-time Options * Pico Compile-time Options * OS Dependent Compile-time Settings * IMAPd Compile-time Options * Building the Pine Programs * Installing Pine and Pico on UNIX Platforms * Installing PC-Pine * Installing IMAPd * Support Files and Environment Variables: UNIX Pine * Support Files, Environment Variables, and Registry Values: PC-Pine Command Line Arguments * Pine * Pico * Pilot Configuration and Preferences * Pine Configuration * General Configuration Variables * Configuration Features * Hidden Config Variables and Features * Retired Variables * Tokens for Index and Replying * Conditional Inclusion of Text for Reply-Leadin, Signatures, and Templates * Per Server Directory Configuration * Color Configuration * Index Line Color Configuration * Role Configuration * Filtering Configuration * Scoring Configuration * Other Rules Configuration * Patterns * Configuring News Configuration Notes + Pine in Function Key Mode + Domain Settings + Syntax for Collections + Syntax for Folder Names + Server Name Syntax + Folder Namespaces + What is a Mail Drop? + Sorting a Folder + Alternate Editor + Signatures and Signature Placement + Feature List Variable + Configuration Inheritance + Using Environment Variables + SMTP Servers + MIME.Types file + Color Details + Additional Notes on PC-Pine Behind the Scenes * Address Books * Remote Configuration * Checkpointing * Debug Files * Filters * Folder Formats and Name Extensions * Folder Locking * INBOX and Special Folders * Internal Help Files * International Character Sets * Interrupted and Postponed Messages * Message Status * MIME: Reading a Message * MIME: Sending a Message * New Mail Notification * NFS * Printers and Printing * Save and Export * Sent Mail * Spell Checker * Terminal Emulation and Key Mapping Notes for Porting and Modification * Porting Pine to Other Platforms * Test Checklist Introduction Design Goals Throughout _Pine_ development, we have had to strike a balance between the need to include features which advanced users require and the need to keep things simple for beginning users. To strike this balance, we have tried to adhere to these design principles: - The model presented to the user has to be simple and clear. Underlying system operation is hidden as much as possible. - It's better to have a few easily understood commands that can be repeated than to have some more sophisticated command that will do the job all at once. - Whenever the user has to select a command, file name, address, etc., the user should be given (or can get) a menu from which to make the selection. Menus need to be complete, small, organized and well thought out. - _Pine_ must provide immediate feedback for the user with each operation. - _Pine_ must be very tolerant of user errors. Any time a user is about to perform an irreversible act (send a message, expunge messages from a folder), _Pine_ should ask for confirmation. - Users should be able to learn by exploration without fear of doing anything wrong. This is an important feature so the user can get started quickly without reading any manuals and so fewer manuals are required. - The core set of _Pine_ functions should be kept to a minimum so new users don't feel "lost" in seemingly extraneous commands and concepts. Just as there were goals relating to the look and feel of _Pine_, there were equally important goals having to do with _Pine_'s structure-the things that users never see but still rely on every time they use _Pine_. While _Pine_ can be used as a stand-alone mail user agent, one of its strongest assets is its use of the Internet Message Access Protocol (IMAP) for accessing remote email folders. In addition, _Pine_ was one of the first programs to support the Multipurpose Internet Mail Extensions (MIME) specification. With MIME, _Pine_ users can reliably send any binary file to any other person on the Internet who uses a MIME compliant email program. The decision to use IMAP and MIME reflects the importance of interoperability, standardization and robustness in _Pine_. As you work with _Pine_ more, you will see other features which reflect the same values. For example, _Pine_ enforces strict compliance with RFC 822, implements a strong mail folder locking mechanism and verifies a process before overwriting any files (e.g. addressbook, expunging messages). Pine Components If you have picked up the _Pine_ distribution, then you already know that _Pine_ comes in a few different pieces. They are: _Pine_ The main code from which the _Pine_ program is compiled. _Pico_ _Pico_ is the name for the _Pine_ composer. The _Pico_ code is used in two ways: (1) it is compiled on its own to be a stand-alone editor and, (2) it is compiled as a library for _Pine_ to support composition of messages within _Pine_. _Pico_ is _Pine_'s internal editor invoked when users need to fill in header lines or type the text of an email message. _Imap_ An API for IMAP. Includes the C-Client library, which is compiled into _Pine_, and the IMAP server _IMAPd_. C-Client implements the IMAP protocol and also negotiates all access between _Pine_ and the mail folders it operates on, even if the folders are local. The C-Client routines are used for email folder parsing and interpreting MIME messages. _IMAPd_ is a separate server that handles IMAP connections from any IMAP-compliant email program. When _Pine_ accesses a remote mailbox, the _Pine_ program is the IMAP client and the _IMAPd_ program is the IMAP server. Background Details Domain Names Domain names are used to uniquely name each host on the Internet. A domain name has a number of parts separated by periods. Each label represents a level in the hierarchy. An example of a name is: olive.cac.washington.edu In this domain name the top-level label is _edu_, indicating it is at an educational institution, the second-level label is _washington_, indicating the University of Washington. _cac_ is a specific department within the University of Washington, and _olive_ is the host name. The top-level names are assigned by Internet organizations, and other names are assigned at the appropriate level. The Domain Name Service, DNS, is the distributed database used to look up these names. _Pine_ relies on domain names in multiple places. A domain name is embedded into the message-id line generated for each piece of email. A domain name is needed to contact an IMAP server to get access to remote INBOXes and folders. Most importantly, domain names are needed to construct the From: line of your outgoing messages so that people on the Internet will be able to get email back to you. On UNIX systems, you can set the domain via the user-domain variable in the _Pine_ configuration file, or rely on the file /etc/hosts which usually sets the name of the local host. While _Pine_ can often deliver email without the domain name being properly configured, it is best to have this set correctly. Problems can usually be solved by adjusting the system's entry in the /etc/hosts file. The fully-qualified name should be listed before any abbreviations. 128.95.112.99 olive.cac.washington.edu olive is preferred over 128.95.112.99 olive olive.cac.washington.edu On PCs, the task of configuring the domain name is a bit different. Often times, PCs do not have domain names-they have _IP addresses_. IP addresses are the numbers which uniquely identify a computer on the network. The way you configure your IP address depends on the networking software which you use on the PC. You can refer to the documentation which came with your networking software or see the PC specific installation notes for help configuring the IP address with your network software. With PCs, it is vital that users set the variable user-domain in the _Pine_ configuration file (PINERC). Details on configuring _Pine_ with correct domain names can be found in the Domain Settings section of this document. _________________________________________________________________ RFC 822 Compliance _Pine_ tries to adhere to RFC 822 a little more strongly than some other mailers and uses the _"full name
"_ format rather than the older _"address (full name)"_ format. The intent of the standard is that parentheses should only be for comments. _Pine_ displays and generates the newer format, but will parse the old format and attempt to turn it into the new one. As far as outgoing email is concerned, _Pine_ fully-qualifies addresses whenever possible. They are even displayed in fully-qualified form on the terminal as the user composes a message. This makes addresses more clear and gives a hint to the user that the network extends beyond the local organization. _Pine_ implements fully-qualified domain names by tacking on the local domain to all unqualified addresses which a user types in. Any address which does not contain an "@" is considered unqualified. The newer format for addresses allows for spaces and special characters in the full name of an address. For this reason, commas are required to separate addresses. If any special characters as defined in RFC 822 appear in the full name, quotes are required around the address. _Pine_ will insert the quotes automatically. The common cases where this happens are with periods after initials and parentheses. Because _Pine_ fully complies with RFC 822, it is sometimes difficult to use non-Internet address formats such as UUCP's host!user or DECNet's USER::HOST with _Pine_. People who run _Pine_ on these systems have made local modifications to _Pine_ or to the mail transport agent (e.g. sendmail) to make things work for them. _Pine_ expects dates to be in the standard RFC 822 format which is something like: [www, ] dd mmm yy hh:mm[:ss] [timezone] It will attempt to parse dates that are not in this format. When an unparsable date is encountered it is displayed as _xxx xx_ when shown in the FOLDER INDEX screen. _________________________________________________________________ SMTP and Sendmail _Pine_ is a _user agent_ not a _message transfer agent._ In plain English, that means _Pine_ does not know how to interact with other computers on the Internet to deliver or receive email. What _Pine_ does know how to do is help users read, organize and create email. The "dirty work" of delivering and accepting email is handled by other programs. All outgoing email is delivered to a mail transfer program or to an SMTP server. The most common mail transfer program is sendmail. Pine 3.91 and earlier: When _Pine_ on a UNIX computer uses the local sendmail, it first writes the message to a temporary file in /tmp. Then _Pine_ runs a shell in the background that runs sendmail on the temporary file and then removes it. This is done with a shell in the background so the user doesn't have to wait for sendmail to finish. By default, sendmail is invoked with the -t flag to cause it to read and parse the header to determine the recipients; the -oem flag to cause errors to be mailed back; and the -oi flag to ignore dots in incoming messages. Systems administrators can choose to configure _Pine_ to use a different mail transfer program or even sendmail with different flags. See the section on UNIX Pine Compile-time Options for more details on this. _Pine_ can also operate as an SMTP client. SMTP stands for _Simple Mail Transfer Protocol_; it specifies the rules by which computers on the Internet pass email to one another. In this case, _Pine_ passes outgoing email messages to a designated SMTP server instead of to a mail transfer program on the local machine. A program on the server then takes care of delivering the message. To make _Pine_ operate as an SMTP client, the smtp-server variable must be set to the IP address or host name of the SMTP server within your organization. This variable accepts a comma separated list of servers, so you can specify multiple SMTP servers. _PC-Pine_ only runs as an SMTP client. Pine 3.92 and later: The selection of which MTA to use depends on the settings of sendmail-path, smtp-server, and compile-time options. The first MTA specified in the following list is used: 1. _sendmail-path_ in /usr/local/lib/pine.conf.fixed 2. _smtp-server_ in /usr/local/pine.conf.fixed 3. _sendmail-path_ specified on the command line. 4. _smtp-server_ specified on the command line. 5. _sendmail-path_ in the user's .pinerc file. 6. _smtp-server_ in the user's .pinerc file. 7. _sendmail-path_ in /usr/local/lib/pine.conf 8. _smtp-server_ in /usr/local/pine.conf 9. DF_SENDMAIL_PATH defined at compile time. 10. SENDMAIL and SENDMAILFLAGS defined at compile time. If the _sendmail-path_ form is used, a child process is forked, and the specified command is executed with the message passed on standard input. Standard output is then passed back and displayed for the user. _NOTE: The program MUST read the message to be posted on standard input, AND operate in the style of sendmail's "-t" option. _ If an _smtp-server_ is specified, a connection to the server is opened. If the message contains 8-bit text, ESMTP 8BITMIME negotiation is attempted. The message is then sent using SMTP commands. If none of the above are set, the default sendmail program is invoked with the "-bs -odb -oem" flags, ESMTP negotiation is attempted, and the message is sent. _________________________________________________________________ Internet Message Access Protocol (IMAP) IMAP is a remote access protocol for message stores. _Pine_ uses IMAP to get at messages and folders which reside on remote machines. With IMAP, all messages are kept on the server. An IMAP client (such as _Pine_) can request specific messages, headers, message structures, etc. The client can also issue commands which delete messages from folders on the server. IMAP's closest kin is POP, the Post Office Protocol, which works by transferring an entire mailbox to the client where all the mail is kept. For a comparison of IMAP and POP, see the paper "Comparing Two Approaches to Remote Mailbox Access: IMAP vs. POP" by Terry Gray. A more detailed exploration of message access may be found in the paper " Message Access Paradigms and Protocols." These papers may be found in the /mail directory of the anonymous FTP server at ftp.cac.washington.edu. IMAP Features: * Allows access to mail folders from more than one client computer. * Works well over low-bandwidth lines because information is sent in small pieces as needed by the user. For example, only header information is sent to build index lists, and if someone sends a 2MB audio file via MIME, you can choose when (or if) you want to get that part of the message. * Email can be delivered and stored on a well-maintained and reliable server which is "always-up". * Folders can be accessed and manipulated from anywhere on the Internet. * Users can get to messages stored in different folders within the same _Pine_ session. * Allows use of IMAP server for searching and parsing. * The latest revision of IMAP (IMAP4) also provides for disconnected operation, including resynchronization of message state between mail servers and message caches on clients. _Pine_ does not yet support this capability, however. IMAP2 is defined in RFC 1176. IMAP4rev1, the revision to IMAP2, is described in RFC 3501. Further information about IMAP may be obtained from the University of Washington's IMAP Information Center on the World Wide Web. _Pine_ 4.00 is an IMAP4rev1 client. _________________________________________________________________ Multipurpose Internet Mail Extensions (MIME) MIME is a way of encoding a multipart message structure into a standard Internet email message. The parts may be nested and may be of seven different types: Text, Audio, Image, Video, Message, Application and Multipart (nested). The MIME specification allows email programs such as _Pine_ to reliably and simply exchange binary data (images, spreadsheets, etc.). MIME includes support for international character sets, tagging each part of a message with the character set it is written in, and providing 7-bit encoding of 8-bit character sets. It also provides a simple rich text format for marking text as bold, underlined, and so on. There is a mechanism for splitting messages into multiple parts and reassembling them at the receiving end. The MIME standard was officially published in June of 1992 as RFC 1341 and subsequently revised in RFC 2045 when it became a full Internet Standard. _Pine_ 3.0 was one of the first email programs to Implement MIME. Now, there are dozens of commercial and freely available MIME-capable email programs. In addition, MIME is being added to newsreaders so MIME messages can be posted and read in USENET newsgroups. The MIME standard also includes support for non-ASCII text in message headers through the extensions described in RFC 1342 and subsequently revised in RFC 2047. Support for RFC 2047 was added in _Pine_ 3.92. An actual MIME message looks something like this: Date: Tue, 12 Mar 1996 15:39:35 -0800 (PST) From: David L Miller To: David L Miller Subject: =?iso-8859-1?Q?Test_MIME_message_with_RFC-1522_headers_=28=E1?= =?i so-8859-1?Q?=E2=E3=29?= Message-Id: Mime-Version: 1.0 Content-Type: MULTIPART/MIXED; BOUNDARY="0-1737669234-826673975=:21583" Content-Id: This message is in MIME format. The first part should be readable text, while the remaining parts are likely unreadable without MIME-aware tools. Send mail to mime@docserver.cac.washington.edu for more info. --0-1737669234-826673975=:21583 Content-Type: TEXT/PLAIN; CHARSET=US-ASCII Content-ID: The text of the message would go here. It is readable if one doesn't mind wading around a little bit of the MIME formatting. After this is a binary file in base 64 encoding. |\ | |\/| David L. Miller dlm@cac.washington.edu (206) 685-6240 |/ |_ | | Software Engineer, Pine Development Team (206) 685-4045 (FAX) University of Washington, Networks & Distributed Computing, JE-20 4545 15th Ave NE, Seattle WA 98105, USA --0-1737669234-826673975=:21583 Content-Type: APPLICATION/ZIP; NAME="test.zip" Content-Transfer-Encoding: BASE64 Content-ID: Content-Description: Test Attachment UEsDBBQAAAAIAGh8bCBbZKT4ygIAAHgFAAAEAAAAdGVzdIVUX2vbMBB/16c4 9rSBNyjsYX1UHSUROLInycv2qNhKI5ZYxlLa5dvvpDRLw6CFgJF09/t3Rxo3 WDBDD43rPJjJQpxMbw9m+h3AbyHuLLSDe7JTcPGUbtYm7NzwGP3wBYQnnT8c 7NQ5s4djsC8t4QbmYE6wsfjpLTy7uPPHCOPk/ATPk4vRDmS008GF4PzwPich zY3m4LfxOQlPNy4GcEO3P/a2h2j/xGyp9ONpco+7CHf33+4/393ff4XNibzL c1UVfXJXQIdIBRx877b4TYy9C3Fym2NEyzsX/pNDet8dD3aIJiagLbo2wwnG 4zT6cK66ZLK1NhH9J4tcZQEy7OxkNyd4nMwQbV9glP7JZb87E3O32fgnm7We XQ8+us4SM47WTCkgMPt9enc2ZAW5c+Pj7o32l0IXXk/r8pSRE3A4jqOfIqqF G+PFlSdRDOaQduXNESTwtDcYfJ8191gWXUjYmOJ43Oxdh11JTzRuSPcY37+B vNqmf0O5RB1G27mt64rLCp4X8pW1L6BvxunCeYHNk3F7s9lb+GAwyvAhOyNE Lxm0gv9gUnH9C+o5rKlacrHQtYAZV2VF+UoBrSp8kJIKzZkqgP1sJFMKagl8 1VSczQqy5noJki2onIGuQS+5AlXPNfaxArgoq3aGwJDq6lZDxVdcU82RKMG/ 4JArTVKzYrJc4pE+8CoJpGIGc65FIp8jO4WGSs3LtqISmlY2tUKyVMUFETWw H0xoUMvE8KbXB4aC6EPFzrDiF6iGlZxWBeFixiUrdXJb1kKx7y2C4hPM6Iou WI4hdVyO6yXVqkZqiXmottLJ9lzWK1LVKttqk8oZ1TS1NrJGS5jqeslQI0aK ieCvzNlgNZJqiccCc5WafLxmKdii4gsmSvYpISkteamzkRwXJiG5SoUpcERK 8xIE8QQ7o+eh5WAUy1qYRP8rioip/maI+OfyF1BLAQIUAxQAAAAIAGh8bCBb ZKT4ygIAAHgFAAAEAAAAAAAAAAEAAACkgQAAAAB0ZXN0UEsFBgAAAAABAAEA MgAAAOwCAAAAAA== --0-1737669234-826673975=:21583-- For details about _Pine_'s implementation of MIME, see the two MIME sections "MIME: Reading a Message" and "MIME: Sending a Message" later in this document. _________________________________________________________________ Folder Collections Folder Collections are _Pine_'s way of dealing with more than a single group of folders. With advent of _PC-Pine_ and the development of tools within IMAP to better manage remote folders, the time was ripe to provide a mechanism for defining a group of remote folders. _PC-Pine_ forced the issue in that many potential _PC-Pine_ users would be migrating from UNIX _Pine_ in a time-sharing environment and, thus, would have some investment in their archived messages on that host. For a more complete description of Folder Collections, see the section on "Syntax for Collections." The _Pine_ distribution is designed to require as little configuration and effort at compile time as possible. Still, there are some _Pine_ behaviors which are set at the time you compile _Pine_. For each of these, there is a reasonable (our opinion) default built into the code, so most systems administrators will have no need for these steps. Building and Installation Compile-time Options The files you may need to modify are ./{pico,pine}/makefile.xxx, ./{pico,pine}/osdep/os-xxx.h, and possibly ./{pico,pine}/osdep/os-xxx.ic, where _xxx_ is the 3-letter code for your platform. You can give the command build help to see the list of ports incorporated into _Pine_ and their associated 3-letter codes. The files ./{pico,pine}/makefile.xxx are where you would set compiler options. By default, _Pine_ will be compiled with debugging on, optimization and profiling off. Note that if you compile with DEBUG off, then _Pine_ will not create its normal debug files, no matter how the debug-level and debug command line flag are set. Some of these can only be set when you compile. Others, however, can be overridden by command-line flags to _Pine_ or settings in _Pine_'s user or system configuration files. Some of the options which can be set when compiling: Including LDAP Functionality In order to build _Pine_ with LDAP functionality included you need to supply the LDAP library and include files. _Pine_ has been successfully built with OpenLDAP 2.0.x, OpenLDAP 1.x, the University of Michigan LDAP library (ldap-3.3), and with the Netscape Directory SDK 1.0 LDAP library. Set up a symlink called ldap in the top-level pine directory (the directory where the _Pine_ build script is located). The build script will call contrib/ldap-setup to help figure out how to use the LDAP libraries. It expects to find directories ldap, ldap/include, ldap/libraries, and file ldap/include/ldap.h. There are at least two slightly different styles of LDAP libraries. One style uses two libraries, libldap and liblber, the other uses just libldap. The script is not very smart, but it attempts to figure out which of these two cases is being used. Modify the script to fit your situation if you need to. When using OpenLDAP as the library (or the older University of Michigan libary), set up the symlink so that it points to the base of the ldap source tree. The ldap-setup script looks for the directory ldap/libraries/liblber and the libraries ldap/libraries/libldap.a and ldap/libraries/liblber.a. To use the Netscape Directory SDK library, make a directory called ldap in the top-level pine directory (where the _Pine_ build script is located). That directory should contain two subdirectories, include and libraries. The include directory is where you should put the include files from the Netscape SDK. The libraries directory is where you should put the library, libldap.a. The build script will run the script contrib/ldap-setup if you have created an ldap symlink or directory. It tries to figure out if the setup is the Univ. of Michigan code or not. If it is Univ. of Michigan ldap-3.3 or the library from mozilla.org, then it will link against both libldap.a and liblber.a. If it isn't, it will link against only libldap.a. You may find you have to do some tweaking to get this to work with the libraries you are using. If you find that a change to contrib/ldap-setup works for you, you might think about sending that to us for inclusion in the next _Pine_ release. If there is no ldap symlink, there is still an attempt to automatically include LDAP support if certain conditions exist. At this point, the check includes a check for Solaris 8, otherwise the automatic inclusion is not done. You may override the automatic inclusion of LDAP with the build argument NOLDAP. _Pine_ uses LDAPv2 protocol. When using LDAPv3 protocol, the results are returned in the utf8 character set. _Pine_ is not yet ready to deal with that, so it tells the server to use the LDAPv2 protocol. Including Kerberos 5 Functionality In order to build _Pine_ with Kerberos functionality included you should place a symlink called krb5 to the directory where your Kerberos5 include files and libraries are located. That is, krb5/include and krb5/lib should exist. Place the symlink in the top-level pine directory (where the _Pine_ build script is located). See the comments in the script contrib/krb5-setup if you have trouble. Pine Compile-time Options USE_QUOTAS Determines whether quotas are checked on startup. Default is to not check the quota. ALLOW_CHANGING_FROM This is now a hidden runtime feature called allow-changing-from. Even with this feature turned on, users still have to include _From_ in their default-composer-hdrs or customized-hdrs in order to be able to edit the From line. Beginning with version 4.10, a user may also change their From address by using Roles. A system administrator may disallow editing of the From line by putting the feature _no-allow-changing-from_ in the system-wide _fixed_ configuration file. The paranoid system administrator can compile in this behavior by defining _NEVER_ALLOW_CHANGING_FROM_ in ./pine/osdep/os-xxx.h. DEFAULT_DEBUG Sets the level of debugging output created in _Pine_'s debug files. Default is level 2. The command-line flag -d may also be used to change the debug level. For example, -dverbose=7. NUMDEBUGFILES Sets the number of debug files kept per user. Default is 4. The command-line flag -d may also be used to change this. For example, -dverbose=3,numfiles=2. BACKGROUND_POST Define this if you want to allow users to turn on the feature that enables sending to take place in a fork()'d child. This may reduce the time on the user's wall clock it takes to post mail. NOTE: You'll also have to make sure the appropriate ./pine/osdep/postreap.* file is included in the ./pine/osdep/os-xxx.ic file for your system. NEW_MAIL_TIME Interval between new-mail checks. Default is 150 seconds. This is obsolete. This should be set in a configuration file by setting the variable mail-check-interval. OVERLAP Number of lines overlap when user views the next page of a message. Default is 2 lines. This is obsolete. This should be set in a configuration file by setting the variable viewer-overlap. PASSFILE _WARNING!_ Turning this on is very dangerous and should probably not be done, except on single user systems! For _PC-Pine_, this is turned on by default and set to the filename PINE.PWD. It may be overridden by the -passfile command-line argument. You may enable it for Unix systems by defining PASSFILE to be a filename which will be located in the same directory as the pinerc file, usually the home directory. The file is used to save passwords from one session to the next. Even if you define PASSFILE when you compile _Pine_, password saving will not be enabled by default, but requires the existence of the file (the name of which is the value of PASSFILE). Even with the existence of this file, the user must still acknowledge a prompt before the password is saved to the file. If _Pine_ is configured to access several different IMAP servers, each password entered will be kept (associated with the corresponding host name) in memory during the current session, and optionally, in the PASSFILE file for use in subsequent sessions. _WARNING_! Use this feature with caution! It effectively makes the user's mail no more secure than the physical security of the machine running _Pine_. What's more, while the password is cloaked by a mild (some might say, feeble) encryption scheme, it is nonetheless sitting in a file on the disk and subject to cracking by anyone with access to it. _BEWARE_! SENDMAIL SENDMAILFLAGS Sets the name and flags for the local program that will be called to handle outgoing email. Default is /usr/lib/sendmail -oi -oem -t. See the SMTP and Sendmail section for more details. SYSTEM_PINERC The name of the file which holds _Pine_ configuration information for all users on the system. Default on UNIX systems is /usr/local/lib/pine.conf. SYSTEM_PINERC_FIXED The name of the file which holds the same type of information as for SYSTEM_PINERC, but only for variables that the administrator wants to keep fixed. That is, users are not allowed to change variables that are specified in the FIXED file. Default on UNIX systems is /usr/local/lib/pine.conf.fixed. There are a couple of more obscure options which are in the source code because a few people have asked for them or because we changed our minds about them being a good idea in general. ENCODE_FROMS Use Quoted-printable encoding so that From's at the beginning of lines don't end up being escaped by >'s. Most people seem to dislike the Q-P encoding more than the > escapes so this is off by default. Once everyone has MIME mail readers, we'll turn this on by default. NO_KEYBOARD_LOCK Disable the keyboard locking function in the main menu. Keyboard locking is enabled by default. An easier way to turn off Keyboard locking is to add the feature disable-keyboard-lock-cmd to the feature list variable in the global pine.conf or pine.conf.fixed file. Pico Compile-time Options There is really only one option settable specifically for _Pico_. It is for the UNIX _Pico_ versions only. The file that may need some changing is ./pico/osdep/os_xxx.h.. Whatever is set will effect the behavior of the _Pico_ stand-alone program as well as the composer within _Pine_. SPELLER Names the program called to do "normal" spell-checking. This can be set in a configuration file instead by setting the speller configuration variable. OS Dependent Compile-time Settings Most of _Pine_'s (and _Pico_'s) operating system dependent behaviors are set in the files ./pico/osdep/os-xxx.h and ./pico/osdep/os-xxx.ic. The flags in the makefiles are also system dependent. See the comments in ./pico/osdep/os-xxx.h for more details. One that may come up is: USE_TERMINFO USE_TERMCAP Instructs _Pine_ to use the terminfo (or termcap) database. Default varies by system. This has been moved from ./pine/osdep/os-xxx.h to ./pico/osdep/os-xxx.h. If you change this you will also have to change the file ./pico/osdep/os-xxx.ic so that it includes the file term.inf instead of term.cap (or vice versa) and you will probably have to change the libraries included by the makefiles ./{pico,pine}/makefile-xxx. Hopefully, it is already set correctly for each system. IMAPd Compile-time Options There are no options or settings required for the version of IMAPd distributed with _Pine_. If you need to be doing more complex modifications to IMAP, then you should pick up the IMAP development package and work with that code. The developer's version of IMAP is available for anonymous ftp from ftp.cac.washington.edu in the directory mail. The file is called imap.tar.Z. _________________________________________________________________ Building the Pine Programs You may have already compiled _Pine_ and tried it out. If so, great! If not, you should be able to do it without too much trouble by following these step-by-step instructions: 1. Figure out what platform you're building for. You can give the command build help or look at the list in ./doc/pine-ports to see the list of ports incorporated into _Pine_. What you need is the three letter code for the platform. Some examples are a41 for the AIX 4.1 operating system, os4 for Digital Unix 4.0, and lnx for Linux. There are sometimes several variants for a single operating system (different compilers, shadow passwords or not, etc.) so look through the whole list in ./doc/pine-ports for the one you want. If your platform is not in the list of ports, then you might have some work ahead of you. First, check the file doc/pine-ports to see if there are others working on a port for your platform or to see if the port is included in the contrib section of the source code. Ports in the contrib directory were contributed by _Pine_ administrators from around the world, but the _Pine_ development team has not been able to test the code. Some of these ports are very old and are based on old versions of _Pine_. If _Pine_ has not yet been ported to your platform at all, read the section on Porting Pine in this document. 2. Make sure you're in the root of the _Pine_ source. When you type ls you should see the following files and directories (or something close to it): README build doc makefile pine bin contrib imap pico 3. Make sure you're getting a clean start by giving the command ./build clean. This should take only a few seconds to run. 4. Give the command ./build _xxx_ where _xxx_ is the three letter code you picked in step 1. The compiler should grind away for a few minutes. 5. When the compilation is complete the sizes of the binaries built will be displayed. The actual binaries are in the various source directories. In addition, the bin directory contains a link to each program compiled. You can just copy them out of bin or try them from there. The build command can be given some options which it passes on to the subordinate makes. Some that may be useful are EXTRACFLAGS, DEBUG, and EXTRALDFLAGS. There are also some SSL-related arguments: SSLDIR, SSLCERTS, SSLINCLUDE, and SSLLIB. You should also read the comments in the build script itself, which are possibly more up-to-date than this text. Here are some examples of options you may want to pass to build. This will turn off the debugging files that _Pine_ produces, while leaving the symbol table information. We believe a better way to do this is to have an alias for pine which executes pine -d0 instead. This turns off debugging at runtime while preserving the possibility of using the debugging if a problem turns up. But if you wanted to turn it off unconditionally you could use the build argument DEBUG=-g In other words, the command to build a _Pine_ with no debugging would be ./build DEBUG=-g target where target is one of the 3-letter port names found in doc/pine-ports. To also leave out the symbol table information you could pass: DEBUG= To turn on the optimizer DEBUG=-O It should be ok to move string constants into a read-only area. We don't think there are any instances where _Pine_ modifies a string constant. So you could pass a flag to your compiler that tells it to do this. This could cause several hundred K of strings to be moved from the data area of the program into the text area of the program, and that should allow that text to be shared among all instances of _Pine_. To do this, for example, with the AIX _a41_ port, you could pass this to build: EXTRACFLAGS=-qro If you are using OpenSSL but have decided to use a non-standard directory (standard one is /usr/local/ssl) for the location then you can cause _Pine_ to use that directory with SSLDIR=/some/other/dir The assumption is that the certs directory is in SSLDIR/certs, the include directory is SSLDIR/include, and the library directory is SSLDIR/lib. You can change those assumptions with SSLCERTS=certs_directory SSLINCLUDE=include_directory and SSLLIB=ssl_library_directory If you are having trouble with the SSL compilation you may explicitly exclude SSL code with NOSSL. NOSSL Similarly, NOLDAP The argument EXTRASPECIALS can be used to pass arguments to the c-client make which aren't provided for in the _Pine_ build script. For example, if you want to change the FRIZZLE parameter (a made up argument which the c-client make uses) you might be tempted to type something like ./build FRIZZLE=cruft target This does work with make on some platforms, but not on others. Some makes seem to pass the arguments on to sub-makes, others don't. If that doesn't work, then EXTRASPECIALS is for you. ./build EXTRASPECIALS="FRIZZLE=cruft" target An additional warning. There are some arguments which are overridden unconditionally in the sub-makes. Hopefully none of the arguments mentioned above falls in this category, but it is something to look out for if you are having trouble. _________________________________________________________________ Installing Pine and Pico on UNIX Platforms Installing _Pine_ and _Pico_ is remarkably simple. You take the program files which you have just transferred or built and you move them to the correct directory on your system. Most often the binaries go in /usr/local/bin though sometimes they are placed in /usr/bin. All the help text is compiled into _Pine_ so there are no _required_ auxiliary files. There are, however, three optional auxiliary files: /usr/local/lib/pine.info, /usr/local/lib/pine.conf, and /usr/local/lib/pine.conf.fixed. The file pine.info contains text on how to get further help on the local system. It is part of the help text for the main menu and should probably refer to the local help desk or the system administrator. If this file doesn't exist a generic version which suggests ``talking to the computer support staff at your site'' is shown. The file pine.conf is used to set system-wide default configurations for _Pine_. The file pine.conf.fixed is also used to set system-wide default configurations for _Pine_. The difference between these two files is that configuration variables set in the pine.conf.fixed file may not normally be over-ridden by a user. See the section on Pine Configuration later in this document for details about the pine.conf and pine.conf.fixed files. _________________________________________________________________ Installing PC-Pine The PC-Pine distribution comes as a .zip file. To install, unzip the files to a directory where you would like the program to reside. Modern Windows versions come with the capability of unzipping .zip files. Failing that, you can use one of the many .zip file extractors out there, or the pkunzip.exe program that resides on our FTP server. Following current Windows conventions, a common directory into which the files could be extracted would be C:\Program Files\PC-Pine\. Having extracted PC-Pine's .zip file to the directory of choice, you can now run that directory's pine.exe, which is the actual PC-Pine program. For convenience, you could place shortcuts to it on the task bar, start menu, etc. Upon first running PC-Pine, you may be asked where you would like to access your Configuration file (called the _pinerc_). This is useful in accessing already existing configuration files, and it does not matter where this file gets created. If you are connecting to an IMAP server to access your email, it is also possible to store this Configuration data on that server, which facilitates accessing the same configuration from multiple machines (in fact, your configuration may have already been set up this way for use with other pine programs). After having established the location of the configuration file, it may be necessary to specify a few configuration settings before reading or sending mail. You may be prompted for the following (which may also be edited from the (S)etup (C)onfig screen from the Main Menu): Folder to open as inbox (or _inbox-path_) - This can be an inbox residing on an IMAP or POP3 server, or one residing locally. An example of an INBOX for an IMAP server is: {server.example.com}INBOX. User-id, Personal name, and host/domain, which are to be used as your email address. SMTP server to forward message - You must enter your SMTP server before you can send any messages. At this point, you will be able to read and send email messages. There are, however, many more preferences that you can set in the Configuration screen. _________________________________________________________________ Installing IMAPd When the _Pine_ distribution is built on a UNIX system, the IMAP server binary, imapd, is compiled. Installing imapd requires placing the binary in the appropriate directory, usually /usr/etc, and adding entries to /etc/services and /etc/inetd.conf or their counterparts. The following line is appropriate for /etc/services: imap 143/tcp # Mail transfer and the next line is appropriate for /etc/inetd.conf: imap stream tcp nowait root /usr/etc/imapd imapd The /etc/inetd.conf file entry may vary on different versions of UNIX. Some have a slightly different set of fields. Also the pathname in /etc/inetd.conf must match the path where imapd is installed. With this configuration, the IMAP server runs without pre-authentication. Each new IMAP connection requires a correct username and password. IMAP can also be run with pre-authentication based on the standard _rsh_ mechanism. To enable this, the user account on the IMAP server must contain a valid file which grants access to the client machine. Enabling _rimap_ authentication is done by creating a link called /etc/rimapd to imapd. Basically, what is happening is that _Pine_ is taking advantage of the ability that rsh has to use privileged TCP ports so it doesn't have to run in privileged mode. If the rimap authentication fails it will drop back to plain password authentication. _PC-Pine_ cannot take advantage of _rimap_ authentication. Also, if your system uses a distributed configuration database, like NIS, Yellow Pages or Netinfo, be sure that appropriate steps are taken to ensure the above mentioned information is updated. _________________________________________________________________ Support Files and Environment Variables: UNIX Pine This section lists the various files which _Pine_ uses which are not email folders. All of these are the default names of files, they may vary based on _Pine_'s configuration. /usr/local/lib/pine.conf Pine's global configuration file. /usr/local/lib/pine.conf.fixed Non-overridable global configuration file. /usr/local/lib/pine.info Local pointer to system administrator. ~/.pinerc Personal configuration file for each user. ~/.pinercex Personal exceptions configuration file for each user. ~/.addressbook Personal addressbook ~/.addressbook.lu Personal address book lookup file (index file to speed up lookups). ~/.newsrc Personal USENET subscription list. This is shared with other newsreading programs. ~/.pine-debugX The files created for debugging _Pine_ problems. By default, there are 4 .pine-debug files kept at any time. ~/.signature A signature file which will be included in all outgoing email messages. ~/.pine-interrupted-mail The text of a message which was interrupted by some unexpected error which _Pine_ detected. ~/mail/postponed-msgs A folder of messages which the user chose to postpone. /etc/mailcap System-wide mail capabilities file. Only used if $MAILCAPS not set. ~/.mailcap Personal mail capabilities file. Combines with system-wide mailcap. Only used if $MAILCAPS not set. The location of the following support files may be controlled by variables in the personal or global _Pine_ configuration file: signature, addressbook and its index file, postponed messages, and newsrc. Unix _Pine_ uses the following environment variables: TERM Tells _Pine_ what kind of terminal is being used. DISPLAY Determines if _Pine_ will try to display IMAGE attachments. TMPDIR, TMP, or TEMP Specifies location of temporary storage area, first one set wins SHELL If not set, default is /bin/sh MAILCAPS A semicolon delimited list of path names to mailcap files. _________________________________________________________________ Support Files, Environment Variables, and Registry Settings: PC-Pine This section lists the various files which _PC-Pine_ uses which are not normal mail folders. All of these are the default names of files, they may vary based on _Pine_'s configuration. \PINE.HLP File containing _Pine_'s internal help text. \PINE.NDX Index of _Pine_'s help text used by _PC-Pine_ to locate entries. $PINERC or or $HOME\PINE\PINERC or \PINERC Path to (required) personal configuration file. $PINERCEX or $HOME\PINE\PINERCEX or \PINERCEX Path to personal exceptions configuration file. $PINECONF Path of optional global configuration file. \ADDRBOOK Personal addressbook \ADDRBOOK.LU Personal address book lookup file (index file to speed up lookups). \PINE.SIG A signature file which will be included in all outgoing email messages. \PINE.PWD A file containing encrypted password for remote mail server. \PINEDEBG.TXT Location of _Pine_ debug file. \MAILCAP and/or \MAILCAP These paths are only used if $MAILCAPS not set. $HOME\NEWSRC or \NEWSRC Personal USENET subscription list. This may be shared with other newsreading programs. $HOME\MAIL\INTRUPTD The text of a message which was interrupted by some unexpected error which _Pine_ detected. $HOME\MAIL\POSTPOND A folder of messages which the user chose to postpone. Registry Values: HKEY_LOCAL_MACHINE\Software\University of Washington\PC-Pine\4.0 _Pinedir_: The directory that contains the _Pine_ executable. _PineEXE_: The name of the _Pine_ executable (most commonly "pine.exe"). HKEY_CURRENT_USER\Software\University of Washington\PC-Pine\4.0 _PineRC_: The path that points to the default pinerc to use. HKEY_LOCAL_MACHINE\Software\Clients\Mail\PC-Pine _DLLPath_: The path that points to _Pine_'s pmapi32.dll. HKLM\Software\Clients\Mail\PC-Pine\shell\open\command _(Default)_: When set as the default mailer, this is the command that is run by external programs. HKLM\Software\Clients\Mail\PC-Pine\Protocols\Mailto\DefaultIcon _(Default)_: This points to the icon to display in relation to _Pine_'s mailto URL rendering. HKLM\Software\Clients\Mail\PC-Pine\Protocols\Mailto\shell\open\command _(Default)_: This value is the command that gets run by external programs when a mailto URL is run with _PC-Pine_ set as the default mailer. HKLM\Software\Clients\News\PC-Pine\shell\open\command _(Default)_: When set as the default newsreader, this is the command that is run by external programs. HKLM\Software\Clients\News\PC-Pine\Protocols\news\DefaultIcon _(Default)_: This points to the icon to display in relation to _Pine_'s news URL rendering. HKLM\Software\Clients\News\PC-Pine\Protocols\news\shell\open\command _(Default)_: This value is the command that gets run by external programs when a news URL is run with _PC-Pine_ set as the default newsreader. HKLM\Software\Clients\News\PC-Pine\Protocols\nntp\DefaultIcon _(Default)_: This points to the icon to display in relation to _Pine_'s nntp URL rendering. HKLM\Software\Clients\News\PC-Pine\Protocols\nntp\shell\open\command _(Default)_: This value is the command that gets run by external programs when a nntp URL is run with _PC-Pine_ set as the default newsreader. _PC-Pine_'s help text and help text index file are expected to reside in the same directory as the PINE.EXE executable, as they are essentially extensions of the executable. The personal configuration file may be in the same directory as the executable, or if that is inconvenient because the executable is on a shared or read-only drive, then it can be in a file named by the $PINERC environment variable, or in $HOME\PINE\PINERC, where if not set, $HOME defaults to the root of the current working drive. Most of the other support files key off of the location of the PINERC file. However, in the case of the NEWSRC file, the path $HOME\NEWSRC is checked first. Also, the postponed messages and interrupted message folders are placed in the default folder collection, normally in the directory $HOME\MAIL. The location of the following support files may be controlled by variables in the personal or global _Pine_ configuration file: signature, addressbook (and its index file), postponed messages, and newsrc. _PC-Pine_ uses the following environment variables: PINERC Overrides default path to pinerc file. PINERCEX Overrides default path to personal exceptions configuration file. PINECONF Optional path to global _Pine_ config file. HOME If not set, _Pine_ uses the root of the current drive, e.g. C: TMPDIR, TMP, or TEMP Specifies location of temporary storage area, first one set wins COMSPEC Specifies shell for external commands. MAILCAPS A semicolon delimited list of path names to mailcap files. Command Line Arguments Pine _Pine_ and _PC-Pine_ can accept quite a few command-line arguments. Many of these arguments overlap with variables in the _Pine_ configuration file. If there is a difference, then a flag set in the command line takes precedence. Both _Pine_ and _PC-Pine_ expect command line arguments (other than addresses) to be preceded by the "-" (dash) as normally used by UNIX programs. _[addresses]_ Send-to: If you give _Pine_ an argument or arguments which do not begin with a dash, _Pine_ treats them as email addresses. _Pine_ will startup in the composer with a message started to the addresses specified. Once the message is sent, the _Pine_ session closes. Standard input redirection is allowed. Separate multiple addresses with a space between them. Addresses are placed in the "To" field only. < _file_ _Pine_ will startup in the composer with _file_ read into the body of the message. Once the message is sent, the _Pine_ session closes. -attach _file_ Go directly into composer with given file attached. -attachlist _file-list_ Go directly into composer with given files attached. This must be the last option on the command line. -attach_and_delete _file_ Go directly into composer with given file attached, delete when finished. -aux _local_directory_ _PC-Pine_ only. This tells _PC-Pine_ the local directory to use for storing auxiliary files, like debug files, address books, and signature files. The pinerc may be local or remote. -nosplash _PC-Pine_ only. This tells _PC-Pine_ to not display the splash screen upon startup. This may be helpful for certain troubleshooting or terminal server scenarios. -bail If the personal configuration file doesn't already exist, exit. This might be useful if the configuration file is accessed using some remote filesystem protocol. If the remote mount is missing this will cause _Pine_ to quit instead of creating a new pinerc. -c _n_ When used with the -f option, apply the _n_th context. This is used when there are multiple folder collections (contexts) and you want to open a folder not in the primary collection. -conf Configuration: Prints a sample system configuration file to the screen or standard output. To generate an initial system configuration file, execute pine -conf > /usr/local/lib/pine.conf To generate a system configuration file using settings from an old system configuration file, execute pine -P old-pine.conf -conf > /usr/local/lib/pine.conf A system configuration file is not required. -convert_sigs _-p pinerc_ Convert signatures contained in signature files into literal signatures. -copy_abook _ _ Copy an address book file to a remote address book folder. If the remote folder doesn't exist, it will be created. If it exists but the first message in the folder isn't a remote address book header message, the copy will be aborted. This flag will not usually be used by a user. Instead, the user will create a remote address book from within _Pine_ and copy entries from the local address book by using aggregate Save in the address book screen. -copy_pinerc _ _ Copy a pinerc configuration file to a remote pinerc folder. If the remote folder doesn't exist, it will be created. If it exists but the first message in the folder isn't a remote pinerc header message, the copy will be aborted. This flag may be useful to users who already have a local pinerc file and would like to convert it to a remote pinerc folder and use that instead. This gives a way to bootstrap that conversion without having to manually reset all of the variables in the remote pinerc folder. -create_lu _addrbook sort-order_ Create auxiliary LookUp (index) file for _addrbook_ and sort _addrbook_ in _sort-order_, which may be _dont-sort_, _nickname_, _fullname_, _nickname-with-lists-last_, or _fullname-with-lists-last_. Only useful when creating global or shared address books. The settings of the features disable-setlocale-collate and enable-setlocale-ctype have no effect when using the create_lu command. See Address Book Lookup File for more information, especially the warning about copying the address book after creating the lookup file. -d _debug-level_ Debug Level: Sets the level of debugging information written by _Pine_. _Debug-level_ can be set to any integer 0-9. A debug level of 0 turns off debugging for the session. (Actually there are some levels higher than 9, but you probably don't want to see them. Sensitive authentication information is hidden at levels less than 10.) -d _keywords_ You may use a more detailed version of the debugging flag to set the debug level in separate parts of _Pine_. The possibilities are flush, timestamp, imap=0..4, tcp, numfiles=0..31, and verbose=0..9. _Flush_ causes debugging information to be flushed immediately to the debug file as it is written. _Verbose_ is the general debugging verbosity level. _Timestamp_ causes timestamps to be added to the debug file, which is useful when you are trying to figure out what is responsible for delays. _Numfiles_ sets the number of debug files saved. _Imap_ sets the debug level for the debugging statements related to the conversation with the IMAP server, and more generally, for the debugging related to _Pine_'s interaction with the C-Client library. If _imap_ is set higher than 4, sensitive authentication information will be included in the debug file. _Tcp_ adds more TCP/IP debugging information. -f _folder_ Startup folder: _Pine_ will open this folder in place of the standard INBOX. -F _file_ Open named text file for viewing and forwarding. -h Help: Prints the list of available command-line arguments to the screen. -i _Pine_ will start up in the FOLDER INDEX screen instead of the MAIN MENU. Configuration equivalent: _initial-keystroke-list=i_. -I _a,b,c,..._ Initial Keystrokes: _Pine_ will execute this comma-separated sequence of commands upon startup. This allows users to get _Pine_ to start in any of its menus/screens. You cannot include any input to the composer in the initial keystrokes. The key is represented by a ``CR'' in the keystroke list; the spacebar is designated by the letters ``SPACE''. Control keys are two character sequences beginning with ``^'', such as ``^I''. A tab character is ``TAB''. Function keys are ``F1'' - ``F12'' and the arrow keys are ``UP'', ``DOWN'', ``LEFT'', and ``RIGHT''. A restriction is that you can't mix function keys and character keys in this list even though you can, in some cases, mix them when running _Pine_. A user can always use only _character_ keys in the startup list even if he or she is using _function_ keys normally, or vice versa. If an element in this list is a string of characters surrounded by double quotes (") then it will be expanded into the individual characters in the string, excluding the double quotes. Configuration equivalent: _initial-keystroke-list_ -install For _PC-Pine_ only, this option prompts for some basic setup information, then exits. -k Function-Key Mode: When invoked in this way, _Pine_ expects the input of commands to be function-keys. Otherwise, commands are linked to the regular character keys. Configuration equivalent: _use-function-keys_ included in _feature-list_. -n _n_ Message-Number: When specified, _Pine_ starts up in the FOLDER INDEX screen with the current message being the specified message number. -nowrite_passfile This tells _Pine_ to use the passfile if there is one, but to never offer writing new passwords to the passfile. -o _folder_ Opens the INBOX (or a folder specified via the -f argument) ReadOnly. -p _pinerc_ Uses the named file as the personal configuration file instead of _~/.pinerc_ or the default PINERC search sequence _PC-Pine_ uses. Pinerc may be either a local file or a remote configuration folder. -P _pinerc_ Uses the named file as the system wide configuration file instead of _/usr/local/lib/pine.conf_ on UNIX, or nothing on _PC-Pine_. Pinerc may be either a local file or a remote configuration folder. -passfile _passfile_ This tells _Pine_ what file should be used as the password file. This should be a fully-qualified filename. -pinerc _file_ Output fresh pinerc configuration to _file_, preserving the settings of variables that the user has made. Use _file_ set to ``-'' to make output go to standard out. -r Restricted Mode: For UNIX _Pine_ only. _Pine_ in restricted mode can only send email to itself. Save and export are limited. -registry _cmd_ For _PC-Pine_ only, this option affects the values of _Pine_'s registry entries. Possible values for _cmd_ are set, noset, clear, clearsilent, and dump. _Set_ will always reset _Pine_'s registry entries according to its current settings. _NoSet_ will never set any values in the registry, but it will still use the values already set in the registry. _Clear_ will clear the registry values. _Clearsilent_ will silently clear the registry values. _Dump_ will display the values of current registry settings. Note that the dump command is currently disabled. Without the -registry option, _PC-Pine_ will write values into the registry only if there currently aren't any values set. -sort _key_ Sort-Key: Specifies the order messages will be displayed in for the FOLDER INDEX screen. _Key_ can have the following values: arrival, date, subject, orderedsubj, thread, from, size, score, to, cc, arrival/reverse, date/reverse, subject/reverse, orderedsubj/reverse, thread/reverse, from/reverse, size/reverse, score/reverse, to/reverse, and cc/reverse. The default value is "arrival". The _key_ value reverse is equivalent to arrival/reverse. Configuration equivalent: _sort-key_. -supported Some options may or may not be supported depending on how _Pine_ was compiled. This is a way to determine which options are supported in the particular copy of _Pine_ you are using. -url _url_ Open the given URL. -v Version: Print version information to the screen. -version Version: Print version information to the screen. -x _exceptions_config_ Configuration settings in the exceptions config override your normal default settings. _Exceptions_config_ may be either a local file or a remote pinerc folder. -z Enable Suspend: When run with this flag, the key sequence ctrl-z will suspend the _Pine_ session. Configuration equivalent: _enable-suspend_ included in _feature-list_. -_option_=_value_ Assign _value_ to the config option _option_. For example, _-signature-file=sig1_ or _-feature-list=signature-at-bottom_. (Note: feature-list values are additive and features may be preceded with no- to turn them off). Pico The following command line options are supported in _Pico_: +_n_ Causes _Pico_ to be started with the cursor located _n_ lines into the file. (Note: no space between "+" sign and number) -a Display all files and directories, including those beginning with a period (.). -b Enable the option to Replace text matches found using the "Where is" command. -d Rebind the "delete" key so the character the cursor is on is rubbed out rather than the character to its left. -e Enable file name completion. -f Use function keys for commands. _This option supported only in conjunction with UW Enhanced NCSA telnet._ -g Enable "Show Cursor" mode in file browser. Cause cursor to be positioned before the current selection rather than placed at the lower left of the display. -k Causes "Cut Text" command to remove characters from the cursor position to the end of the line rather than remove the entire line. -m Enable mouse functionality. This only works when _Pico_ is run from within an X Window System "xterm" window. -n_n_ The -n_n_ option enables new mail notification. The _n_ argument is optional, and specifies how often, in seconds, your mailbox is checked for new mail. For example, -n60 causes _Pico_ to check for new mail once every minute. The default interval is 180 seconds, while the minimum allowed is 30. (Note: no space between "n" and the number) -o _dir_ Sets operating directory. Only files within this directory are accessible. Likewise, the file browser is limited to the specified directory subtree. -p Preserve the "start" and "stop" characters, typically Ctrl-Q and Ctrl-S, which are sometimes used in communications paths to control data flow between devices that operate at different speeds. -q TermdefWins. Termcap or terminfo escape sequences are used in preference to default escape sequences. -Q _quotestr_ Set the quote string. Especially useful when composing email, setting this allows the quote string to be checked for when Justifying paragraphs. A common quote string is "> ". -r_n_ Sets column used to limit the "Justify" command's right margin. -t Enable "tool" mode. Intended for when _Pico_ is used as the editor within other tools (e.g., Elm, Pnews). _Pico_ will not prompt for save on exit, and will not rename the buffer during the "Write Out" command. -v View the file only, disallowing any editing. -version Print version information. -w Disable word wrap (thus allow editing of long lines). _Note: Pico will break any lines over 255 characters when reading a file, regardless of word wrapping._ -x Disable keymenu at the bottom of the screen. -z Enable ^Z suspension of _Pico_. Pilot The following command line options are supported in _Pilot_: -a Display all files including those beginning with a period (.). -f Use function keys for commands. _This option supported only in conjunction with UW Enhanced NCSA telnet._ -g Enable "Show Cursor" mode. Cause cursor to be positioned before the current selection rather than placed at the lower left of the display. -m Enable mouse functionality. This only works when _Pilot_ is run from within an X Window System "xterm" window. -n_n_ The -n_n_ option enables new mail notification. The _n_ argument is optional, and specifies how often, in seconds, your mailbox is checked for new mail. For example, -n60 causes _Pilot_ to check for new mail once every minute. The default interval is 180 seconds, while the minimum allowed is 30. (Note: no space between "n" and the number) -o _dir_ Sets operating directory. Only files within the specified directory are accessible and browsing is limited to the specified directory subtree. -v Enable single vertical column display. -x Disable keymenu at the bottom of the screen. -z Enable ^Z suspension of _Pilot_. Configuration and Preferences Pine Configuration There is very little in _Pine_ which _requires_ compile-time configuration. In most cases, the compiled-in preferences will suit users and administrators just fine. When running _Pine_ on a UNIX system, the default built-in configuration can be changed by setting variables in the system configuration files, /usr/local/lib/pine.conf or /usr/local/lib/pine.conf.fixed. (Actually, these files are whatever the definitions for SYSTEM_PINERC and SYSTEM_PINERC_FIXED in pine/osdep/os-xxx.h are set to.) The location of the pine.conf file can be changed with the -P command line argument. Both _Pine_ and _PC-Pine_ also use personal (user-based) configuration files. On UNIX machines, the personal configuration file is the file ~/.pinerc. For _PC-Pine_ systems, the personal configuration file is in $PINERC or or ${HOME}\PINE\PINERC or \PINERC. Or the personal configuration file can be specified with the -p command line argument. After the personal configuration, _Pine_ may optionally use a personal exceptions configuration file which is specified with the command line option "-x exceptions_config". "Exceptions_config" may be either a local file or a remote configuration folder. For Unix _Pine_, if you don't have a "-x" command line option, _Pine_ will look for the file ".pinercex" in the same local directory that the regular config file is located in. If the regular config file is remote then Unix _Pine_ looks in the home directory for ".pinercex". For _PC-Pine_, if you don't have a "-x" command line option, _PC-Pine_ will use the value of the environment variable $PINERCEX. If that is not set, _PC-Pine_ will look for the local file "PINERCEX" in the same local directory that the regular config file is located in. If the regular config file is remote then _PC-Pine_ looks in the local directory specfied by the "-aux local_directory" command line argument, or the directory ${HOME}\PINE, or in . The syntax of a non-list configuration variable is this: = If the value is absent then the variable is unset. To set a variable to the empty value the syntax is "". This is equivalent to an absent value except that it overrides any system-wide value that may be set. Quotes may be used around any value. All values are strings and end at the end of the line or the closing quote. Leading and trailing space is ignored unless it is included in the quotes. There is one variable, _use-only-domain-name_, for which the only appropriate values are _yes_ and _no_. That's because it is a variable from the early days of _Pine_ before features existed. There is also a second type of variable, lists. A list is a comma-separated list of values. The syntax for a list is: = [, , ... ] A list can be continued on subsequent lines by beginning the line with white-space. Both the per-user and global configuration files may contain comments which are lines beginning with a #. For UNIX _Pine_, there are five ways in which each variable can be set. In decreasing order of precedence they are: 1. the system-wide _fixed_ configuration file 2. a command line argument 3. the personal exceptions file 4. the personal configuration file 5. the system-wide configuration file. If the variable is not set in any of those places, there is a default setting in the source code. So, system-wide fixed settings always take precedence over command line flags, which take precedence over per-user exception settings, which take precedence over per-user settings, which take precedence over system-wide configuration settings. _PC-Pine_ has the same list, except that it does not use a system-wide _fixed_ configuration file. This can be modified slightly by using inheritance, which is covered below. You may get a sample/fresh copy of the system configuration file by running _Pine -conf._ The result will be printed on the standard output with short comments describing each variable. (The online help in the Setup screens provides longer comments.) If you need to fix some of the configuration variables, you would use the same template for the fixed configuration file as for the regular system-wide configuration file. (If it isn't clear, the purpose of the fixed configuration file is to allow system administrators to restrict the configurability of _Pine_. It is by no means a bullet-proof method.) _Pine_ will automatically create the personal configuration file the first time it is run, so there is no need to generate a sample. _Pine_ reads and writes the personal configuration file occasionally during normal operation. Users will not normally look at their personal configuration file, but will use the Setup screens from within _Pine_ to set the values in this file. If a user does add additional comments to the personal configuration file they will be retained. References to environment variables may be included in the _Pine_ configuration files. The format is $variable or ${variable}. The character ~ will be expanded to the $HOME environment variable. For a more complete explanation of how environment variables work, see the section Using Environment Variables. When environment variables are used for _Pine_ settings which take lists, you must have an environment variable set for each member of the list. That is, _Pine_ won't properly recognize an environment variable which is set equal to a comma-delimited list. It is OK to reference unset environment variables in the _Pine_ configuration file, which will expand to nothing. Remote and Local Configuration Beginning with _Pine_ 4.30 there are two types of storage for configuration information. _Local_ configuration files are used by default. These are just regular files on the UNIX system or on the PC. This is the only kind of configuration storage _Pine_ used prior to 4.30. _Remote_ configuration folders are stored on an IMAP server. The advantage of using a remote configuration is that the same information may be accessed from multiple platforms. For example, if you use one computer at work and another at home, the same configuration could be used from both places. A configuration change from one place would be seen in both places. Technical information about remote configuration is in Remote Configuration. Generic and Exceptional Configuration If you use _Pine_ from more than one platform it may be convenient to split your configuration information into two pieces, a generic piece and exceptions which apply to a particular platform. For example, suppose you use _Pine_ from home and from work. Most of your configuration settings are probably the same in both locations, so those settings belong in the generic settings configuration. However, you may use a different SMTP server and INBOX from home than you do from work. The "smtp-server" and "inbox-path" variables could be part of your exceptional configuration so that they could be different in the two places. Beginning with _Pine_ 4.30 you can use the command line option "-x config" to split your configuration into generic and exceptional pieces. Config may be either local or remote. For most people, splitting the configuration information into two pieces is only going to be useful if the generic information is accessed remotely. If you already have a local pinerc file with settings you like you may find that the command Setup/RemoteConfigSetup will be useful in helping you convert to a remote configuration. The command line flag copy_pinerc may also be useful. Configuration Inheritance Configuration inheritance is a power user feature. It is confusing and not completely supported by the configuration user interface. For configuration variables which are lists, like "smtp-server" or "incoming-folders", the inheritance mechanism makes it possible to _combine_ the values of options from different configuration locations instead of _replacing_ the value. Configuration Inheritance has more information about how inheritance is used. _________________________________________________________________ General Configuration Variables The following is a list of all _Pine_ configuration variables, in alphabetical order. Note that not all variables apply to all versions of _Pine_ and that some variables are only applicable in a system configuration file and some are only applicable in a personal configuration file. These are configuration _variables_. Configuration Features are in a separate section. _addrbook-sort-rule_ This variable sets up the default address book sorting. Currently, _Pine_ will accept the values _dont-sort_, _fullname-with-lists-last_, _fullname_, _nickname-with-lists-last_, and _nickname_. The default is to sort by fullname with lists last. _address-book_ A list of personal address books. Each entry in the list is an optional nickname followed by a pathname or file name relative to the home directory. The nickname is separated from the rest of the line with whitespace. Instead of a local pathname or file name, a remote folder name can be given. This causes the address book to be a Remote address book. Remote folder syntax is discussed in Syntax for Remote Folders. This list of address books will be combined with the global-address-book list to arrive at the complete set of address books. _addressbook-formats_ This option specifies the format that address books are displayed in. By default, address books are displayed with the nicknames in the first column, the fullnames in the second column, and addresses in the third column. The system figures out reasonable defaults for the widths of the columns. An address book may be given a different format by listing special tokens in the order you want them to display. The possible tokens are NICKNAME, FULLNAME, ADDRESS, FCC, and COMMENT. More details are included in the online help for this variable. _alt-addresses_ This option provides a place for you to list alternate email addresses you may have. If set, the option affects the behavior of the _Reply_ command and the _+_ symbol in the "Folder Index", which denotes that a message has been addressed specifically to you. In the default INDEX display the personal name (or email address) of the person listed in the message's "From:" header field is usually displayed except when that address is yours or one of your alternate addresses. In that case you will usually see the name of the first person specified in the message's "To:" header field with the prefix "To: " prepended. With respect to _Reply_, the _Reply to All_ option will exclude addresses listed here. _bugs-additional-data_ System-wide configuration files only. Program/Script used by _Report Bug_ command. Output from the program/script is captured and attached to the bug report. _bugs-fullname_, _bugs-address_, _local-fullname_, _local-address_, _suggest-fullname_, and _suggest-address_ System-wide configuration files only. These are used by the bug report commands which can be accessed from some of the Help screens. _character-set_ This sets the character set used by the terminal. Currently appropriate values are _US-ASCII_, _ISO-8859-1_ through _ISO-8859-9_ and _ISO-2022-JP_. See the section on International Character Sets for more details. The default is _US-ASCII_. _color-style_ UNIX _Pine_ only (color is automatically on with _PC-Pine_). If the terminal or terminal emulator you are using is capable of displaying colors, this variable controls whether or not color will be used in _Pine_. If you turn color on and things are set up correctly, you should see color appear on the screen immmediately. Modern terminal emulators are usually capable of displaying colors. This variable may be set to any of the following values: no-color Don't use color. use-termdef In order to decide if your terminal is capable of color, _Pine_ looks in the terminal capabilities database, TERMINFO or TERMCAP, depending on how _Pine_ was compiled. This is a good option to choose if you switch between a color and a non-color terminal with the same _Pine_ configuration. _Pine_ will know to use color on the color terminal because it is described in the termcap entry, and _Pine_ will know to use black and white on the non-color terminal. Color Details has more information about configuring a termcap entry for color. This is usually something a system administrator does. force-ansi-8color Because setting up a termcap entry is confusing and because the terminal capabilities database is often not correctly configured for color, this choice and the next may be easier for you to use. If your terminal emulator responds to ANSI color escape sequences, which many do, this option will cause _Pine_ to believe your terminal will respond to the escape sequences which produce eight different foreground and background colors. The escape sequences used to set the foreground colors are ESC [ 3 m where the color_number is an ASCII digit between 0 and 7. The numbers 0 through 7 should correspond to the colors black, red, green, yellow, blue, magenta, cyan, and white. Some terminal emulators use a pre-ANSI scheme which swaps the colors blue and red and the colors yellow and cyan. This will cause the default colors to be different, but other than that things should work fine. The escape sequences used to set the background colors are the same as for the foreground colors except a "4" replaces the "3". Note: With the Tera Term terminal emulator this setting works well. You should also have the Tera Term "Full color" option turned OFF. You may find the "Full color" option in Tera Term's "Setup" menu, in the "Window" submenu. force-ansi-16color Many terminal emulators know about the same eight colors above plus eight more. This option attempts to use all 16 colors. The same escape sequences as for the eight-color terminal are used for the first eight colors. The escape sequences used to set foreground colors 8-15 are the same as for 0-7 except the "3" is replaced with a "9". The background color sequences for colors 8-15 are the same as for 0-7 except the "4" is replaced with "10". You can tell if the 16 colors are working by turning on this option and then going into one of the color configuration screens, for example, the configuration screen for Normal Color. If you see 16 different colors to select from, it's working. The normal default is "no-color". Once you've turned on color you may set the colors of many objects on the screen individually. The Color Configuration section has more information, or you may just try it by running the "Setup" command and typing "K" for Kolor to enter the color configuration screen (Kolor instead of Color because C means Config). Most categories of color which _Pine_ supports are configurable there. Index line color is configured separately. Beginning with _Pine_ 4.41, the default names of some colors were changed in order to have better interoperability between _PC-Pine_ and Unix _Pine_ with both eight and 16-color terminals. Both _PC-Pine_ and 8-color Unix _Pine_ will interpret the colors named color008, color009, ..., color015 as black, red, ..., white. When changing a configuration color they will put the colors black, color009, color010, ..., color015 into the config file. That is, the colors red, green, ..., white will only appear in the config file if put there manually or if they were already there from an older version of _Pine_. The reason for this is because with 16-color xterm the colors red, green, ..., white are actually two-thirds intensity colors, and the colors color009, color010, ..., color015 (in pine terminology) are full intensity colors which better match the default eight of _PC-Pine_ or 8-color Unix terminal emulators. The idea is that you can use the eight colors of an 8-color terminal on a 16-color terminal and with _PC-Pine_. Those eight colors will be about the same in all three situations. In pre-4.41 _PC-Pine_ the three default grays offered were called color008, color009, and color010. Since this conflicts with three of the colors on 16-color terminals these three colors have been renamed colorlgr, colormgr, and colordgr. _PC-Pine_ will attempt to automatically change those color names the first time you run a version higher than 4.40. If that fails for some reason, you will see your old light grays displayed as black, your old medium grays displayed as red, and your old dark grays displayed as green. You may fix these from within the _PC-Pine_ color config screens. If you then go back to running a pre-4.41 version of _PC-Pine_ the colors with the new names (colorlgr...) will show up as Normally colored text. _composer-wrap-column_ This option specifies an aspect of _Pine_'s Composer. This gives the maximum width that auto-wrapped lines will have. It's also the maximum width of lines justified using the ^J Justify command. The normal default is _74_. The largest allowed setting is normally _80_ in order to prevent very long lines from being sent in outgoing mail. When the mail is actually sent, trailing spaces will be stripped off of each line. _current-indexline-style_ current-indexline-style. _customized-hdrs_ You may add your own custom headers to outgoing messages. Each header you specify here must include the header tag (Reply-To:, Approved:, etc.) and may optionally include a value for that header. If you want to see these custom headers each time you compose a message, you must add them to your default-composer-hdrs list, otherwise they become part of the rich header set which you only see when you press the rich header command. (If you are looking for a way to change which headers are _displayed_ when you view a message, take a look at the viewer-hdrs option instead.) Here's an example which shows how you might set your From address From: Full Name and another showing how you might set a Reply-To address Reply-To: user@example.com You may also set non-standard header values here. For example, you could add Organization: My Organization Name or even X-Favorite-Colors: Purple and Gold If you include a value after the colon then that header will be included in your outgoing messages unless you delete it before sending. If a header in the Customized-Headers list has only a tag but no value, then it will not be included in outgoing messages unless you edit a value in manually. For example, if Reply-To: is in the list, then the Reply-To header will be available for editing but won't be included unless a value is added while in the composer. It's actually a little more complicated than that. The values of headers that you set with the Customized-Headers option are defaults. If the message you are about to compose already has a value for a header, that value is used instead of a value from your Customized-Headers. For example, if you are Replying to a message the Subject field will already be filled in. In that case, if the Customized-Headers list contains a Subject line, the custom subject will _NOT_ be used. The subject derived from the subject of the message you are Replying to will be used instead. It is also possible to make header setting even more complicated and more automatic by using Roles, but if all you want to do is set a default value for a header, you don't need to think about Roles. If you change your From address you may also find it useful to add the changed From address to the alt-addresses configuration option. Because commas are used in the configuration file to separate the list of Customized-Hdrs, you need to quote the value if that value contains a comma. Use double quotes and place the quotes around the entire value part of the header, not including the name of the header. For example, you might have Organization: "My Organization Name, My City" as one of the Customized-Hdrs. _dead-letter-files_ This option affects _Pine_'s behavior when you cancel a message being composed. _Pine_'s usual behavior is to write the canceled message to a file named "dead.letter" in your home directory, or "DEADLETR" when using _PC-Pine_, overwriting any previous message. If you set this option to a value higher than one, then that many copies of dead letter files will be saved. For example, if you set this option to "3" then you may have files named "DEADLETR", "DEADLETR2", and "DEADLETR3"; or "dead.letter", "dead.letter2", and "dead.letter3". In this example, the most recently cancelled message will be in "dead.letter", and the third most recently cancelled message will be in "dead.letter3". The fourth most recently cancelled message will no longer be saved. If you set this option to zero, then NO record of canceled messages is maintained. If the feature Quell-Dead-Letter-On-Cancel is set, that overrides whatever you set for this option. If this option had existed at the time, then the Quell feature would not have been added, but it is still there for backwards compatibility. So, in order for this option to have the desired effect, make sure the Quell feature is turned off. _default-composer-hdrs_ You can control which headers you want visible when composing outgoing email using this option. You can specify any of the regular set, any Rich Header, or any Customized-Hdrs which you have already defined. If you use this setting at all, you must specify all the headers you want to see, you can't just add to the regular header set. The default set is To:, Cc:, Attchmnt:, and Subject:. Note that the "Newsgroups:" header will be abbreviated in the Composer display, but should be spelled out in full here. _default-fcc_ The name of the folder to which all outgoing mail goes is set here. The compiled-in default is _sent-mail_ (UNIX) or _sentmail_ (PC). It can be set to "" (two double quotes with nothing between them) to turn off saving copies of outgoing mail. If _default-fcc_ is a relative file name, then it is relative to your default collection for saves (see folder-collections). _default-saved-msg-folder_ This option determines the default folder name for _Saves_... If this is not a path name, it will be in the default collection for saves. Any valid folder specification, local or IMAP, is allowed. This default folder only applies when the saved-msg-name-rule doesn't override it. Unix _Pine_ default is normally _saved-messages_ in the default folder collection. _PC-Pine_ default is _SAVEMAIL_ (normally stored as _SAVEMAIL.MTX_). _disable-setlocale-collate_ This is a hard to understand feature that should only be used in rare cases. Normally, the C function call setlocale(LC_COLLATE, "") is used by _Pine_. If you want to try turning it off, setting this feature will turn it off. This part of the locale has to do with the sort order of characters in your locale. A related feature is enable-setlocale-ctype. _disable-these-drivers_ This variable is a list of mail drivers which will be disabled. The candidates for disabling are listed below. There may be more in the future if you compile _Pine_ with a newer version of the c-client library. + mbox + mbx + mh + mmdf + mtx + mx + news + phile + tenex + unix The _mbox_ driver enables the following behavior: if there is a file called mbox in your home directory, and if that file is either empty or in Unix mailbox format, then every time you open _INBOX_ the _mbox_ driver will automatically transfer mail from the system mail spool directory into the mbox file and delete it from the spool directory. If you disable the _mbox_ driver, this will not happen. It is not recommended to disable the driver which supports the system default mailbox format. On most non-SCO systems, that driver is the _unix_ driver. On most SCO systems, it is the _mmdf_ driver. The system default driver may be configured to something else on your system; check with your system manager for additional information. It is most likely not very useful for you to disable any of the drivers other than possibly _mbox_. You could disable some of the others if you know for certain that you don't need them but the performance gain in doing so is very modest. _disable-these-authenticators_ This variable is a list of SASL (Simple Authentication and Security Layer) authenticators which will be disabled. SASL is a mechanism for authenticating to IMAP, POP3, SMTP, and other network servers. _Pine_ matches its list of supported authenticators with the server to determine the most secure authenticator that is supported by both. If no matching authenticators are found, _Pine_ will revert to plaintext login (or, in the case of SMTP, will be unable to authenticate at all). The candidates for disabling are listed below. There may be more if you compile _Pine_ with additional authenticators and/or a newer version of the c-client library. + GSSAPI + CRAM-MD5 + PLAIN + LOGIN Normally, you will not disable any authenticators. There are two exceptions: 1. You use a broken server that advertises an authenticator, but does not actually implement it. 2. You have a Kerberos-capable version of _Pine_ and the server is also Kerberos-capable, but you can not obtain Kerberos credentials on the server machine, thus you desire to disable GSSAPI (which in turn disables _Pine_'s Kerberos support). It is never necessary to disable authenticators, since _Pine_ will try other authenticators before giving up. However, disabling the relevant authenticator avoids annoying error messages. _display-filters_ This option defines a list of text-filtering commands (programs or scripts) that may be used to filter text portions of received messages prior to their use (e.g., presentation in the "Message Text" display screen). For security reasons, the full path name of the filter command must be specified. Display filters do not work with _PC-Pine_. The command is executed and the message is piped into its standard input. The standard output of the command is read back by _Pine_. The __TMPFILE__ token (see below) overrides this default behavior. The filter's use is based on the configured _trigger_ string. The format of a filter definition is: You can specify as many filters as you wish, separating them with a comma. Each filter can have only one trigger and command. Thus, two trigger strings which invoke the same command require separate filter specifications. The _trigger_ is simply text that, if found in the message, will invoke the associated command. If the trigger contains any space characters, it must be placed within quotes. Likewise, should you wish a filter to be invoked unconditionally, define the trigger as the null string, "" (two consecutive double-quote characters). If the trigger string is found anywhere in the text of the message the filter is invoked. Placing the trigger text within the tokens defined below changes where within the text the trigger must be before considering it a match. Trigger Modifying Tokens: __CHARSET(string)__ This token tells _Pine_ to invoke the supplied command if the text is in a character set matching string (e.g., ISO-8859-2 or ISO-2022-JP). __LEADING(string)__ This token tells _Pine_ to invoke the supplied command if the enclosed string is found to be the first non-whitespace text. NOTE: Quotes are necessary if string contains the space character. __BEGINNING(string)__ This token tells _Pine_ to invoke the supplied command if the enclosed string is found at the beginning of any line in the text. NOTE: Quotes are necessary if string contains the space character. The "command" and "arguments" portion is simply the command line to be invoked if the trigger string is found. Below are tokens that _Pine_ will recognize and replace with special values when the command is actually invoked. Command Modifying Tokens: __TMPFILE__ When the command is executed, this token is replaced with the path and name of the temporary file containing the text to be filtered. _Pine_ expects the filter to replace this data with the filter's result. NOTE: Use of this token implies that the text to be filtered is not piped into standard input of the executed command and its standard output is ignored. _Pine_ restores the tty modes before invoking the filter in case the filter interacts with the user via its own standard input and output. __RESULTFILE__ When the command is executed, this token is replaced with the path and name of a temporary file intended to contain a status message from the filter. _Pine_ displays this in the message status field. __DATAFILE__ When the command is executed, this token is replaced with the path and name of a temporary file that _Pine_ creates once per session and deletes upon exit. The file is intended to be used by the filter to store state information between instances of the filter. __PREPENDKEY__ When the command is executed, this token indicates that a random number will be passed down the input stream before the message text. This number could be used as a session key. It does not appear as a command-line argument. It is sent in this way to improve security. The number is unique to the current _Pine_ session and is only generated once per session. The feature disable-terminal-reset-for-display-filters is related. Performance caveat/considerations: Testing for the trigger and invoking the filter doesn't come for free. There is overhead associated with searching for the trigger string, testing for the filter's existence and actually piping the text through the filter. The impact can be reduced if the Trigger Modifying Tokens above are employed. Limitation: If Header Colors are being used, the sequences of bytes which indicate color changes will be contained in the text which is passed to the display-filter. If this causes problems you'll need to turn off Header Colors. The thirteen bytes which indicate a color change are the character \377 followed by \010 for a foreground color or \011 for a background color. Then comes eleven characters of RGB data which looks something like 255, 0,255, depending on the particular color, of course. _download-command_ This option affects the behavior of the _Export_ command. It specifies a Unix program name, and any necessary command line arguments, that _Pine_ can use to transfer the exported message to your personal computer's disk. _download-command-prefix_ This option is used in conjunction with the _download-command_ option. It defines text to be written to the terminal emulator (via standard output) immediately prior to starting the download command. This is useful for integrated serial line file transfer agents that permit command passing (e.g., Kermit's APC method). _editor_ UNIX _Pine_ only. Sets the name of the alternate editor for composing mail (message text only, not headers). It will be invoked with the "^_" command or it will be invoked automatically if the enable-alternate-editor-implicitly feature is set. _empty-header-message_ When sending, if all of the To, Cc, and Newsgroups fields are empty, _Pine_ will put a special address in the To line. The default value is "undisclosed-recipients: ;". The reason for this is to avoid embarrassment caused by some Internet mail transfer software that interprets a "missing" To: header as an error and replaces it with an Apparently-to: header that may contain the addresses you entered on the Bcc: line, defeating the purpose of the Bcc. You may change the part of this message that comes before the ": ;" by setting the _empty-header-message_ variable to something else. _fcc-name-rule_ Determines default folder name for fcc when composing. Currently, _Pine_ will accept the values _default-fcc_, _by-recipient_, or _last-fcc-used_. If set to _default-fcc_, then _Pine_ will use the value defined in the default-fcc variable (which itself has a default) for the Fcc header field. If set to _by-recipient_, then _Pine_ will use the name of the recipient as a folder name for the fcc. The relevant recipient is the first address in the To field. If set to "last-fcc-used", then _Pine_ will offer to Fcc to whatever folder you used previously. In all cases, the field can still be edited after it is initially assigned. If the fcc field in the address book is set for the first To address, that value over-rides any value derived from this rule. _feature-list_ This is a list of the many features (options) which may be turned on or off. There is a separate section titled Configuration Features which explains each of the features. There is some additional explanation about the _feature-list_ variable itself in Feature List Variable. _file-directory_ _PC-Pine_ only. This value affects the Composer's "^J Attach" command, the Attachment Index Screen's "S Save" command, and the Message Index's "E Export" command. Normally, when a filename is supplied that lacks a leading "path" component, _Pine_ assumes the file exists in the user's home directory. Under Windows operating systems, this definition isn't always clear. This feature allows you to explictly set where _Pine_ should look for files without a leading path. NOTE: this feature's value is ignored if either use-current-dir feature is set or the PINERC has a value for the operating-dir variable. _folder-collections_ This is a list of one or more collections where saved mail is stored. See the sections describing folder collections and collection syntax for more information. The first collection in this list is the default collection for _Save_s, including default-fcc's. _folder-extension_ _PC-Pine_ only. File extension used for local folder names. This is .MTX by default. _folder-reopen-rule_ _Pine_ normally checks for new mail in the currently open folder and in the INBOX every few minutes. There are some situations where automatic new-mail checking does not work. For example, if a mail folder is opened using the POP protocol or a newsgroup is being read using the NNTP protocol, then new-mail checking is disabled. It may be possible to check for new mail in these cases by reopening the folder. _Pine_ does not do this for you automatically, but you may do the commands manually to cause this to happen. You reopen by going back to the folder list screen from the message index screen with the "<" command, and then going back into the message index screen with the ">" command. (Actually, any method you would normally use to open a folder will work the same as the "<" followed by ">" method. For example, the GoTo Folder command will work, or you may use L to go to the Folder List screen and Carriage Return to reopen the folder.) There are some cases where _Pine_ knows that reopening the folder should be useful as a way to discover new mail. At the time of this writing, connections made using the POP protocol, news reading using the NNTP protocol, local news reading, and local ReadOnly folders which are in the traditional UNIX or the MMDF format all fall into this category. There are other cases where it _may_ be a way to discover new mail, but _Pine_ has no way of knowing, so it might also just be an exercise in futility. All remote, ReadOnly folders other than those listed just above fall into this category. The setting of this option together with the type of folder controls how _Pine_ will react to the apparent attempt to reopen a folder. If you don't reopen, then you will just be back in the message index with no change. You left the index and came back, but the folder remained "open" the whole time. However, if you do reopen the folder, the folder is closed and then reopened. In this case, the current state of the open folder is lost. The New status, Important and Answered flags, selected state, Zoom state, collapsed or expanded state of threads, current message number, and any other temporary state is all lost when the reopen happens. For POP folders (but not NNTP newsgroups) the Deleted flags are also lost. In the possibilities listed below, the text says "POP/NNTP" in several places. That really implies the case where _Pine_ knows it is a good way to discover new mail, which is more than just POP and NNTP, but POP and NNTP are the cases of most interest. This option probably has more possible values than it deserves. They are: Always reopen _Pine_ will not ask whether you want to reopen but will just do the reopen whenever you type a command that implies a reopen, regardless of the access method. In other words, it is assumed you would always answer Yes if asked about reopening. Yes for POP/NNTP, Ask about other remote [Yes] _Pine_ will assume a Yes answer if the access method is POP or NNTP, but will ask you whether to reopen other remote folders, with a default answer of Yes. Yes for POP/NNTP, Ask about other remote [No] _Pine_ will assume a Yes answer if the access method is POP or NNTP, but will ask you whether to reopen other remote folders, with a default answer of No. Yes for POP/NNTP, No for other remote _Pine_ will assume a Yes answer if the access method is POP or NNTP, and will assume a No answer for all other remote folders. Always ask [Yes] _Pine_ will not differentiate based on access method. It will always ask for all remote folders, with a default answer of Yes. Always ask [No] _Pine_ will not differentiate based on access method. It will always ask for all remote folders, with a default answer of No. Ask about POP/NNTP [Yes], No for other remote _Pine_ will ask if the access method is POP or NNTP, with a default answer of Yes. It will never attempt to reopen other remote folders. Ask about POP/NNTP [No], No for other remote This is the default. _Pine_ will ask if the access method is POP or NNTP, with a default answer of No. It will never attempt to reopen other remote folders. Never reopen _Pine_ will never attempt to reopen already open folders. Remember, wherever it says POP or NNTP above it really means POP or NNTP or any of the other situations where it is likely that reopening is a good way to discover new mail. There is an alternative that may be of useful in some situations. Instead of manually checking for new mail you can set up a Mail Drop and automatically check for new mail. _folder-sort-rule_ This option controls the order in which folder list entries will be presented in the FOLDER LIST screen. Choose one of the following: _Alphabetical_ sort by alphabetical name independent of type _Alpha-with-dirs-last_ sort by alphabetical name grouping directory entries to the end of the list _Alpha-with-dirs-first_ sort by alphabetical name grouping directory entries to the start of the list The normal default is _Alphabetical_. _font-name_ Winsock version of _PC-Pine_ only. _font-size_ Winsock version of _PC-Pine_ only. _font-style_ Winsock version of _PC-Pine_ only. _forced-abook-entry_ System-wide _Pine_ configuration files only. Force these address book entries into all writable personal address books. This is a list variable. Each item in the list has the form: Nickname | Fullname | Address with optional whitespace in all the obvious places. _form-letter-folder_ A Form Letter Folder is a mail folder that is intended to contain messages that you have composed and that are intended to be sent in their original form repeatedly. Setting this variable will alter _Pine_'s usual behavior when you execute the Compose command. Normally, _Pine_ offers a chance to continue a postponed or interrupted message should one or the other exist. When this variable is set to a folder name that exists, _Pine_ will also offer the chance to select a message from the folder to insert into the composer, much like when continuing a postponed message. The difference, however, is that _Pine_ will not automatically delete the selected message from the Form Letter Folder. Setting this variable will also affect _Pine_'s behavior when you Postpone a message from the composer. Normally, _Pine_ simply stashes the message away in your Postponed-Folder. Regardless of the specified folder's existence, _Pine_ will ask which folder you intend the message to be stored in. Choose the "F" option to store the message in your Form Letter Folder. This is the most common way to add a message to the folder. Another method of adding messages to the folder is via the _Pine_ composer's Fcc: field. If you are sending a message that you expect to send in the same form again, you can enter the Form Letter Folder's name in this field. _Pine_, as usual, will copy the message as it's sent. Note, when you later select this message from your Form Letter Folder, it will have the same recipients as the original message. To delete a message from the Form Letter Folder, you can either select the folder from a suitable FOLDER LIST screen, or use the Delete command in the MESSAGE INDEX offered when selecting from the folder as part of the Compose command. You can delete a Form Letter Folder just as any other folder from a suitable FOLDER LIST screen. You may find that the Roles facility introduced in _Pine_ 4.10 can be used to replace the Form Letter Folder. _global-address-book_ A list of shared address books. Each entry in the list is an optional nickname followed by a pathname or file name relative to the home directory. A SPACE character separates the nickname from the rest of the line. Instead of a local pathname or file name, a remote folder name can be given. This causes the address book to be a Remote address book. Remote folder syntax is discussed in Syntax for Remote Folders. This list will be added to the address-book list to arrive at the complete set of address books. Global address books are defined to be ReadOnly. _goto-default-rule_ This value affects _Pine_'s behavior when using the _Goto_ command. There are five possible values for this option: _folder-in-first-collection_ _Pine_ will offer the most recently visited folder in the default collection found in the "Collection List" screen as the default. _inbox-or-folder-in-first-collection_ If the current folder is _INBOX_, _Pine_ will offer the most recently visited folder in the default collection found in the "Collection List" screen. If the current folder is other than _INBOX_, _INBOX_ is offered as the default. _inbox-or-folder-in-recent-collection_ This is _Pine_'s default behavior. If the current folder is _INBOX_, _Pine_ will offer the last open folder as the default. If the current folder is other than _INBOX_, _INBOX_ is offered as the default. _first-collection-with-inbox-default_ Instead of offering the most recently visited folder in the default collection, the default collection is offered but with _INBOX_ as the default folder. If you type in a folder name it will be in the default collection. If you simply accept the default, however, your _INBOX_ will be opened. _most-recent-folder_ The last accepted value simply causes the most recently opened folder to be offered as the default regardless of the currently opened folder. NOTE: The default while a newsgroup is open remains the same; the last open newsgroup. _image-viewer_ This variable names the program to call for displaying parts of a MIME message that are of type IMAGE. If your system supports the _mailcap_ system, you don't need to set this variable. _inbox-path_ This specifies the name of the folder to use for the _INBOX_. By default this is unset and the system's default is used. The most common reason for setting this is to open an IMAP mailbox for the _INBOX_. For example, _{imap5.u.example.edu}inbox_ will open the user's standard _INBOX_ on the mail server, _imap5_. _incoming-archive-folders_ This is like read-message-folder, only more general. This is a list of folder pairs, with the first separated from the second in the pair by a space. The first folder in a pair is the folder you want to archive, and the second folder is the folder that read messages from the first should be moved to. Depending on how you define the auto-move-read-msgs feature, you may or may not be asked when you leave the first folder if you want read messages to be moved to the second folder. In either case, moving the messages means they will be deleted from the first folder. If these are not path names, they will be in the default collection for _Save_s. Any valid folder specification, local or remote (via IMAP), is allowed. There is no default. _incoming-folders_ This is a list of one or more folders other than _INBOX_ that may receive new messages. This list is slightly special in that it is always expanded in the folder lister. In the future, it may become more special. For example, it would be nice if _Pine_ would monitor the folders in this list for new mail. _incoming-startup-rule_ This rule affects _Pine_'s behavior when opening the _INBOX_ or another folder from the "INCOMING MESSAGE FOLDERS". This rule tells _Pine_ which message to make the current message when an incoming folder is opened. There are seven possible values for this option: _first-unseen_ The current message will be the first unseen message which has not been marked deleted, or the last message if all of the messages have been seen. This is the default setting. _first-recent_ This is similar to _first-unseen_. Instead of first unseen it is the first recent message. A message is considered to be recent if it arrived since the last time the folder was open (by any mail client, not just the current one). So this option causes the current message to be set to the first undeleted-recent message, or the last message if none is both undeleted and recent. _first-important_ This will result in the current message being set to the first message marked Important (but not Deleted). If no messages are marked Important, then it will be the last message. _first-important-or-unseen_ This selects the minimum of the first unseen and the first important messages. _first-important-or-recent_ This selects the first of the first recent and the first important messages. _first_ Set the current message to the first undeleted message unless all are deleted. In that case set it to the last message. _last_ Set the current message to the last undeleted message unless all are deleted. In that case set it to the last message. _index-answered-background-color_ _index-answered-foreground-color_ _index-deleted-background-color_ _index-deleted-foreground-color_ _index-important-background-color_ _index-important-foreground-color_ _index-new-background-color_ _index-new-foreground-color_ _index-recent-background-color_ _index-recent-foreground-color_ _index-to-me-background-color_ _index-to-me-foreground-color_ _index-unseen-background-color_ _index-unseen-foreground-color_ Index Colors. _index-format_ This option is used to customize the content of lines in the MESSAGE INDEX screen. Each line is intended to convey some amount of immediately relevant information about each message in the current folder. _Pine_ provides a pre-defined set of informational fields with reasonable column widths automatically computed. You can, however, replace this default set by listing special tokens in the order you want them displayed. The list of available tokens is here. Spaces are used to separate listed tokens. Additionally, you can specify how much of the screen's width the taken's associated data should occupy on the index line by appending the token with a pair of parentheses enclosing either a number or percentage. For example, "SUBJECT(13)" means to allocate 13 characters of space to the subject column, and "SUBJECT(20%)" means to allocate 20% of the available space to the subjects column, while plain "SUBJECT" means the system will attempt to figure out a reasonable amount of space. There is always one space between every pair of columns, so if you use fixed column widths (like 13) you should remember to take that into account. Several of the fields are virtually fixed-width, so it doesn't make much sense to specify the width for them. The fields STATUS, FULLSTATUS, IMAPSTATUS, MSGNO, the DATE fields, SIZE, and DESCRIPSIZE all fall into that category. You _may_ specify widths for those if you wish, but you're probably better off letting the system pick those widths. The default is equivalent to: index-format=STATUS MSGNO DATE FROMORTO(33%) SIZE SUBJECT(67%) This means that the four fields without percentages will be allocated first, and then 33% and 67% of the _remaining_ space will go to the from and subject fields. If one of those two fields is specified as a percentage and the other is left for the system to choose, then the percentage is taken as an absolute percentage of the screen, not of the space remaining after allocating the first four columns. It doesn't usually make sense to do it that way. If you leave off all the widths, then the subject and from fields (if both are present) are allocated space in a 2 to 1 ratio, which is almost exactly the same as the default. What you are most likely to do with this configuration option is to specify which fields appear at all, which order they appear in, and the percentage of screen that is used for the from and subject fields if you don't like the 2 to 1 default. _initial-keystroke-list_ This is a comma-separated list of keystrokes which _Pine_ executes on startup. Items in the list are usually just characters, but there are some special values. _SPACE,_ _TAB,_ and _CR_ mean a space character, tab character, and a carriage return, respectively. _F1_ through _F12_ stand for the twelve function keys. _UP, DOWN, LEFT, _and_ RIGHT _stand for the arrow keys. Control characters are represented with _^_. A restriction is that you can't mix function keys and character keys in this list even though you can, in some cases, mix them when running _Pine_. A user can always use only _character_ keys in the startup list even if he or she is using _function_ keys normally, or vice versa. If an element in this list is a string surrounded by double quotes (") then it will be expanded into the individual characters in the string, excluding the double quotes. _kblock-passwd-count_ System-wide _Pine_ configuration files only. Number of times a user will have to enter a password when they run the keyboard lock command in the main menu. _keylabel-background-color_ _keylabel-foreground-color_ KeyLabel Color. _keyname-background-color_ _keyname-foreground-color_ KeyName Color. _keywords_ You may define your own set of keywords and optionally set them on a message by message basis. These are similar to the "Important" flag which the user may set using the Flag command. The difference is that the Important flag is always present for each folder. User-defined keywords are chosen by the user. You may set up the list of possible keywords here. Then you use the Flag command to set or clear the keywords in each message. Keywords may be used when Selecting messages (Select Keyword). You will need to enable the enable-aggregate-command-set option to use Select. Keywords may also be used in the Patterns of Rules (Filters, Indexcolors, etc). Filter rules may be used to set keywords automatically. Keywords may be displayed as part of the Subject of a message by using the SUBJKEY or SUBJKEYINIT tokens in the Index-Format option. The Keyword-Surrounding-Chars option may be used to modify the display of keywords using SUBJKEY and SUBJKEYINIT slightly. Keywords may also be displayed in a column of their own in the MESSAGE INDEX screen by using the KEY or KEYINIT tokens. It is also possible to color keywords in the index using the Setup/Kolor screen (Keyword Colors). Keywords are not supported by all mail servers. You may give keywords nicknames if you wish. If the keyword definition you type in contains a SPACE character, then the actual value of the keyword is everything after the last SPACE and the nickname for that keyword is everything before the last SPACE. For example, suppose you are trying to interoperate with another email program which uses a particular keyword with an unpleasant name. Maybe it uses a keyword called VendorName.SoftwareName.08 but for you that keyword means that the message is work-related. You could define a keyword to have the value Work VendorName.SoftwareName.08 and then you would use the name "Work" when dealing with that keyword in _Pine_. If you defined it as My Work VendorName.SoftwareName.08 the nickname would be everything before the last SPACE, that is the nickname would be "My Work". Some commonly used keywords begin with dollar signs. This presents a slight complication, because the dollar sign is normally used to signify environment variable expansion in the _Pine_ configuration. In order to specify a keyword which begins with a dollar sign you must precede the dollar sign with a second dollar sign to escape its special meaning. For example, if you want to include the keyword $Label1 as one of your possible keywords, you must enter the text $$Label1 instead. _keyword-surrounding-chars_ This option controls a minor aspect of _Pine_'s MESSAGE INDEX and MESSAGE TEXT screens. If you have modified the Index-Format option so that either the "SUBJKEY" or "SUBJKEYINIT" tokens are used to display keywords or their initials along with the Subject; then this option may be used to modify the resulting display slightly. By default, the keywords or initials displayed for these tokens will be surrounded with curly braces ({ and }) and a trailing space. For example, if keywords "Work" and "Now" are set for a message, the "SUBJKEY" token will normally look like {Work Now} actual subject and the SUBJKEYINIT token would look like {WN} actual subject The default character before the keywords is the left brace ({) and the default after the keywords is the right brace followed by a space (} ). This option allows you to change that. You should set it to two values separated by a space. The values may be quoted if they include space characters. So, for example, the default value could be specified explicitly by setting this option to Keyword-Surrounding-chars="{" "} " The first part wouldn't need to be quoted (but it doesn't hurt). The second part does need the quotes because it includes a space character. If you wanted to change the braces to brackets you could use Keyword-Surrounding-chars="[" "] " Inside the quotes you can use backslash quote to mean quote, so Keyword-Surrounding-chars="\"" "\" " would produce "Work Now" actual subject It is also possible to color keywords in the index using the Setup/Kolor screen (Keyword Colors). It is not possible to change the fact that a space character is used to separate the keywords if more than one keyword is set for a message. It is also not possible to change the fact that there are no separators between the keyword initials if more than one keyword is set. _last-time-prune-questioned_ Personal configuration file only. This variable records the month the user was last asked if his or her _sent-mail_ folders should be pruned. The format is _yy.mm_. This is automatically updated by _Pine_ when the the pruning is done or declined. If a user wanted to make _Pine_ stop asking this question he or she could set this time to something far in the future. This may not be set in the system-wide configuration files. Note: The _yy_ year is actually the number of years since 1900, so it will be equal to 101 in the year 2001. _last-version-used_ Personal configuration file only. This is set automatically by _Pine_. It is used to keep track of the last version of _Pine_ that was run by the user. Whenever the version number increases, a new version message is printed out. This may not be set in the system-wide configuration files. _ldap-servers_ This is only available if _Pine_ was linked with an LDAP library when it was compiled. This variable is normally managed by _Pine_ though it can be set in the system-wide configuration files as well as the personal configuration. It is a list variable. Each item in the list contains quite a bit of extra information besides just the server name. To put this into a system-wide config file the easiest thing to do is to configure a personal _Pine_ for the LDAP server then copy the configuration line into the system-wide config file. Each item in the list looks like: server_name[:port] "quoted stuff" The server_name is just a hostname and it is followed by an optional colon and port number. The default port is 389. Following the server name is a single SPACE character followed by a bunch of characters inside double quotes. The part inside the quotes is a set of _tag_ = _value_ pairs. Each tag is preceded by a slash (/) and followed by an equal sign. The value for that tag is the text up to the next slash. An example of some quoted stuff is: "/base=o=University of Washington, c=US/impl=0/.../nick=My Server" This would set the search base for this server to o=University of Washington, c=US, set the implicit bit to zero, and set the nickname for the server to My Server. All of the tags correspond directly to items in the Setup/Directory screen so experiment with that if you want to see what the possible tags and values are. _literal-signature_ With this option your actual signature, as opposed to the name of a file containing your signature, is stored in the _Pine_ configuration file. If this is defined it takes precedence over the _signature-file_ option. This is simply a different way to store the signature data. The signature is stored inside your _Pine_ configuration file instead of in a separate signature file. Tokens contained in the signature work the same way they do with the regular signature-file. The Setup/Signature command in _Pine_'s Main Menu will edit the _literal-signature_ by default. However, if no _literal-signature_ is defined and the file named in the _signature-file_ option exists, then the latter will be used instead. Compose (Reply, Forward, ...) will default to using the _literal-signature_ if defined, otherwise it will use the contents of the file named in _signature-file_. The _Pine_ composer is used to edit the literal-signature. The result of that edit is first converted to a C-style string before it is stored in the configuration file. In particular, the two character sequence \n (backslash followed by the character "n") will be used to signify a line-break in the signature. You don't have to enter the \n, but it will be visible in the SETUP CONFIGURATION window after you are done editing the signature. _mail-check-interval_ This option specifies, in seconds, how often _Pine_ will check for new mail. If set to zero, new-mail checking is disabled. (You can always manually force a new-mail check by typing ^L (Ctrl-L), which is also the command to refresh the screen, or by typing the Next command when the current message is the last message of the folder.) There is a minimum value for this option, normally 15 seconds. The default value is normally 150 seconds. The higher you set this option, the easier it is on the server. There are some situations where automatic new-mail checking does not work. See the discussion about new-mail checking in folder-reopen-rule. The new-mail checking will not happen exactly at the frequency that you specify. For example, _Pine_ may elect to defer a non-INBOX mail check if you are busy typing. Or, it may check more frequently than you have specified if that is thought to be necessary to keep the server from closing the connection to the folder due to inactivity. If _Pine_ checks for new mail as a side effect of another command, it will reset the timer, so that new-mail checking may seem to happen irregularly instead of every X seconds like clockwork. If you are anxious to know about new mail as soon as possible, set the check interval low, and you'll know about the new mail by approximately that amount of time after it arrives. If you aren't so worried about knowing right away, set this option to a higher value. That will save the server some processing time and may save you some of the time you spend waiting for new-mail checks to happen if you are dealing with a slow server or slow network connection. If you suspect that new-mail checking is causing slow downs for you, you may want to look into the options Quell-Mailchecks-Composing-Except-Inbox, Quell-Mailchecks-Composing-Inbox and Mail-Check-Interval-Noncurrent, which refine when mail checking is done. If the mailbox being check uses a Mail Drop then there is a minimum time (maildrop-check-minimum) between new-mail checks. Because of this minimum you may notice that new mail does not appear promptly when you expect it. The reason for this is to protect the server from over-zealous opening and closing of the Mail Drop folder, since that is a costly operation. A side effect of disabling mail checking is that there will be situations in which the user's IMAP connection will be broken due to inactivity timers on the server. Another side effect is that the user-input-timeout option won't work. _mail-check-interval-noncurrent_ This option is closely related to the Mail-Check-Interval option, as well as the Quell-Mailchecks-Composing-Except-Inbox and Quell-Mailchecks-Composing-Inbox options. If the "Mail-Check-Interval" option is set to zero, then automatic new-mail checking is disabled and this option will have no effect. Normally this option is set to zero, which means that the value used will be the same as the value for the "Mail-Check-Interval". If you set this option to a value different from zero (usually larger than the value for "Mail-Check-Interval") then that is the check interval that will be used for folders which are not the currently open folder or the INBOX. You may not even have any folders that are noncurrent and not the INBOX. If you do, it is likely that they are due to Stay-Open-Folders you have configured. This option also affects the rate of mail checking done on cached connections to folders you previously had open but are no longer actively using. You aren't expected to understand that last sentence, but if you are interested take a look at Max-Remote-Connections, and the related options. _mail-directory_ This variable was more important in previous versions of _Pine_. Now it is used only as the default for storing personal folders (and only if there are no folder-collections defined). The default value is _~/mail_ on UNIX and _${HOME}\MAIL_ on a PC. _mailcap-search-path_ This variable is used to replace _Pine_'s default mailcap file search path. It takes one or more file names (full paths must be specified) in which to look for mail capability data. _maildrop-check-minimum_ New-mail checking for a Mail Drop is a little different from new mail checking for a regular folder. One of the differences is that the connection to the Mail Drop is not kept open and so the cost of checking (delay for you and additional load for the server) may be significant. Because of this additional cost we set a minimum time that must pass between checks. This minimum only applies to the automatic checking done by _Pine_. If you force a check by typing ^L (Ctrl-L) or by typing the Next command when you are at the end of a folder index, then the check is done right away. This option specifies, in seconds, the _minimum_ time between Mail Drop new-mail checks. You may want to set this minimum high in order to avoid experiencing some of the delays associated with the checks. Note that the time between checks is still controlled by the regular Mail-Check-Interval option. When _Pine_ is about to do an automatic check for new mail (because the Mail-Check-Interval has expired) then if the time since the last new-mail check of any open Mail Drops has been greater than the MailDrop-Check-Minimum, the Mail Drop is checked for new mail as well. Therefore, it is only useful to set this option to a value that is higher than the Mail-Check-Interval. If this option is set to zero, automatic Mail Drop new-mail checking is disabled. There is a minimum value, normally 60 seconds. The default value is normally 60 seconds as well. This applies to the INBOX and to the currently open folder if that is different from the INBOX. _max-remote-connections_ This option affects low-level behavior of Pine. The default value for this option is _2_. If your INBOX is accessed using the IMAP protocol from an IMAP server, that connection is kept open throughout the duration of your _Pine_ session, independent of the value of this option. The same is true of any Stay-Open-Folders you have defined. This option controls _Pine_'s behavior when connecting to remote IMAP folders other than your INBOX or your Stay-Open-Folders. It specifies the maximum number of remote IMAP connections (other than those mentioned above) that _Pine_ will use for accessing the rest of your folders. If you set this option to zero, you will turn off most remote connection re-use. It's difficult to understand exactly what this option does, and it is usually fine to leave it set to its default value. It is probably more likely that you will be interested in setting the Stay-Open-Folders option instead of changing the value of this option. A slightly longer explanation of what is going on with this option is given in the next paragraphs. There are some time costs involved in opening and closing remote IMAP folders, the main costs being the time you have to wait for the connection to the server and the time for the folder to open. Opening a folder may involve not only the time the server takes to do its processing but time that _Pine_ uses to do filtering. These times can vary widely. They depend on how loaded the server is, how large the folder being opened is, and how you set up filtering, among other things. Once _Pine_ has opened a connection to a particular folder, it will attempt to keep that connection open in case you use it again. In order to do this, _Pine_ will attempt to use the Max-Remote-Connections (the value of this option) IMAP connections you have alloted for this purpose. For example, suppose the value of this option is set to "2". If your INBOX is accessed on a remote server using the IMAP protocol, that doesn't count as one of the remote connections but it is always kept open. If you then open another IMAP folder, that would be your first remote connection counted as one of the Max-Remote-Connections connections. If you open a third folder the second will be left open, in case you return to it. You won't be able to tell it has been left open. It will appear to be closed when you leave the folder but the connection will remain in the background. Now suppose you go back to the second folder (the first folder after the INBOX). A connection to that folder is still open so you won't have to wait for the startup time to open it. Meanwhile, the connection to the third folder will be left behind. Now, if you open a fourth folder, you will bump into the Max-Remote-Connections limit, because this will be the third folder other than INBOX and you have the option set to "2". The connection that is being used for the third folder will be re-used for this new fourth folder. If you go back to the third folder after this, it is no longer already connected when you get there. You'll still save some time since _Pine_ will re-use the connection to the fourth folder and you have already logged in on that connection, but the folder will have to be re-opened from scratch. If a folder is large and the startup cost is dominated by the time it takes to open that folder or to run filters on it, then it will pay to make the value of this option large enough to keep it open. On the other hand, if you only revisit a handful of folders or if the folders are small, then it might make more sense to keep this number small so that the reconnect time (the time to start up a new connection and authenticate) is eliminated instead. You may also need to consider the impact on the server. On the surface, a larger number here may cause a larger impact on the server, since you will have more connections open to the server. On the other hand, not only will _you_ be avoiding the startup costs associated with reopening a folder, but the _server_ will be avoiding those costs as well. When twenty five minutes pass without any active use of an IMAP connection being saved for possible re-use, that connection will be shut down, _mimetype-search-path_ This variable is used to replace _Pine_'s default mime.types file search path. It takes one or more file names (full paths must be specified) in which to look for file-name-extension to MIME type mapping data. See the Config Notes for details on _Pine_'s usage of the MIME.Types File. _new-version-threshold_ When a new version of _Pine_ is run for the first time it offers a special explanatory screen to the user upon startup. This option helps control when and if that special screen appears for users that have previously run _Pine_. It takes as its value a _Pine_ version number. _Pine_ versions less than the specified value will supress this special screen while versions equal to or greater than that specified will behave normally. _newmail-fifo-path_ This option is only available in UNIX _Pine_. However, there is a very similar feature built in to _PC-Pine_. In _PC-Pine_'s Config menu at the top of the screen is an option called "New Mail Window". You may have _Pine_ create a FIFO special file (also called a named pipe, see mkfifo(3) and fifo(4)) where it will send a one-line message each time a new message is received in the current folder, the INBOX, or any open Stay-Open-Folders. To protect against two different _Pine_s both writing to the same FIFO, _Pine_ will only create the FIFO and write to it if it doesn't already exist. A possible way to use this option would be to have a separate window on your screen running the command cat filename where "filename" is the name of the file given for this option. Because the file won't exist until after you start _Pine_, you must _first_ start _Pine_ and _then_ run the "cat" command. You may be tempted to use "tail -f filename" to view the new mail log. However, the common implementations of the tail command will not do what you are hoping. The width of the messages produced for the FIFO may be altered with the NewMail-Window-Width option. On some systems, fifos may only be created in a local filesystem. In other words, they may not be in NFS filesystems. This requirement is not universal. If the system you are using supports it, it should work. (It is often the case that your home directory is in an NFS filesystem. If that is the case, you might try using a file in the "/tmp" filesystem, which is usually a local filesytem.) Even when it is possible to use an NFS-mounted filesystem as a place to name the fifo (for example, your home directory), it will still be the case that the reader (probably the "cat" command) and the writer (_Pine_) of the fifo must be running on the same system. _newmail-window-width_ UNIX _Pine_ only. This option is only useful if you have turned on the NewMail-FIFO-Path option. That option causes new mail messages to be sent to a fifo file. Those messages will be 80 characters wide by default. You can change the width of the messages by changing this option. For example, if you are reading those messages in another window you might want to set this width to the width of that other window. For UNIX _Pine_, this option is only useful if you have turned on the NewMail-FIFO-Path option. That option causes new mail messages to be sent to a fifo file. Those messages will be 80 characters wide by default. You can change the width of those messages by changing this option. For example, if you are reading those messages in another window you might want to set this width to the width of that other window. If you are using _PC-Pine_, it has an option in the Config menu to turn on the "New Mail Window". The present option also controls the width of that window. _news-active-file-path_ This option tells _Pine_ where to look for the "active file" for newsgroups when accessing news locally, rather than via NNTP. The default path is usually /usr/lib/news/active. _news-collections_ This is a list of collections where news folders are located. See the section describing collections for more information. _news-spool-directory_ This option tells _Pine_ where to look for the "news spool" for newsgroups when accessing news locally, rather than via NNTP. The default path is usually /usr/spool/news. _newsrc-path_ This option overrides the default name _Pine_ uses for your "newsrc" news status and subscription file. If set, _Pine_ will take this value as the full pathname for the desired newsrc file. _nntp-range_ This option applies only to newsgroups accessed using the NNTP protocol. It does not, for example, apply to newsgroups accessed using an IMAP-to-NNTP proxy. When you open a connection to a News server using the NNTP protocol, you normally have access to all of the articles in each newsgroup. If a server keeps a large backlog of messages it may speed performance some to restrict attention to only the newer messages in a group. This option allows you to set how many article numbers should be checked when opening a newsgroup. You can think of "nntp-range" as specifying the maximum number of messages you ever want to see. For example, if you only ever wanted to look at the last 500 messages in each newsgroup you could set this option to 500. In actuality, it isn't quite that. Instead, for performance reasons, it specifies the range of article numbers to be checked, beginning with the highest numbered article and going backwards from there. If there are messages that have been canceled or deleted their article numbers are still counted as part of the range. So, more precisely, setting the "nntp-range" will cause article numbers last_article_number - nntp-range + 1 through last_article_number to be considered when reading a newsgroup. The number of messages that show up in your index will be less than or equal to the value of "nntp-range". The purpose of this option is simply to speed up access when reading news. The speedup comes because _Pine_ can ignore all but the last nntp-range article numbers, and can avoid downloading any information about the ignored articles. There is a cost you pay for this speedup. That cost is that there is no way for you to see those ignored articles. The articles that come before the range you specify are invisible to you and to _Pine_, as if they did not exist at all. There is no way to see those messages using, for example, an unexclude command or something similar. The only way to see those articles is to set this option high enough (or set it to zero) and then to reopen the newsgroup. If this option is set to 0 (which is also the default), then the range is unlimited. This option applies globally to all NNTP servers and to all newsgroups on those servers. There is no way to set different values for different newsgroups or servers. _nntp-server_ One or more NNTP servers (host name or IP address) which _Pine_ will use for reading and posting news. If you read and post news to and from a single NNTP server, you can get away with only setting the _nntp-server_ variable and leaving the _news-collections_ variable unset. When you define an NNTP server, _Pine_ implicitly defines a news collection for you, assuming that server as the news server and assuming that you will use the NNTP protocol and a local newsrc configuration file for reading news. See also Configuring News. Your NNTP server may offer NNTP "AUTHINFO SASL" or "AUTHINFO USER" authentication. It may even require it. If your NNTP server does offer such authentication you may specify a user name parameter to cause _Pine_ to attempt to authenticate. The same is true for the server name in a folder collection which uses NNTP. This parameter requires an associated value, the username identifier with which to establish the server connection. An example might be: nntpserver.example.com/user=katie If authentication is offered by the server, this will cause _Pine_ to attempt to use it. If authentication is not offered by the server, this will cause _Pine_ to fail with an error similar to: Error: NNTP authentication not available For more details about the server name possibilities see Server Name Syntax. _normal-background-color_ _normal-foreground-color_ Normal Color. _operating-dir_ System-wide _Pine_ configuration files only. This names the root of the tree to which the user is restricted when reading and writing folders and files. It is usually used in the _fixed_ configuration file. _patterns-filters2_ Matching patterns and their corresponding actions are stored in this variable. These patterns are used with Filtering. This variable is normally maintained through the Setup/Rules/Filters configuration screen. It is a list variable. Each member of the list is a single pattern/action pair, or it can be a file which contains zero or more lines of pattern/action pairs. The only way to create a filters file is to use the InsertFile command in the Setup/Rules/Filters screen with a filename which doesn't yet exist. Then use the Shuffle command to move existing filter patterns into the file. This isn't very convenient but it isn't thought that many users will need this functionality. The purpose of filter files is for sharing filters. _patterns-indexcolors_ Matching patterns and their corresponding actions are stored in this variable. These patterns are used for Index Line Colors. This variable is normally maintained through the Setup/Rules/Indexcolor configuration screen. It is a list variable. Each member of the list is a single pattern/action pair, or it can be a file which contains zero or more lines of pattern/action pairs. The only way to create a indexcolor file is to use the InsertFile command in the Setup/Rules/Indexcolor screen with a filename which doesn't yet exist. Then use the Shuffle command to move existing patterns into the file. This isn't very convenient but it isn't thought that many users will need this functionality. The purpose of indexcolor files is for sharing indexcolors. _patterns-other_ Matching patterns and their corresponding actions are stored in this variable. These patterns are used with Miscellaneous Rules configuration. This variable is normally maintained through the Setup/Rules/Other configuration screen. It is a list variable. Each member of the list is a single pattern/action pair, or it can be a file which contains zero or more lines of pattern/action pairs. The only way to create a rules file is to use the InsertFile command in the Setup/Rules/Other screen with a filename which doesn't yet exist. Then use the Shuffle command to move existing rules into the file. This isn't very convenient but it isn't thought that many users will need this functionality. _patterns-roles_ Matching patterns and their corresponding actions are stored in this variable. These patterns are used with Roles. This variable is normally maintained through the Setup/Rules/Roles configuration screen. It is a list variable. Each member of the list is a single pattern/action pair, or it can be a file which contains zero or more lines of pattern/action pairs. The only way to create a roles file is to use the InsertFile command in the Setup/Rules/Roles screen with a filename which doesn't yet exist. Then use the Shuffle command to move existing roles into the file. This isn't very convenient but it isn't thought that many users will need this functionality. The purpose of role files is for sharing roles. _patterns-scores2_ Matching patterns and their corresponding actions are stored in this variable. These patterns are used with Scoring. This variable is normally maintained through the Setup/Rules/SetScores configuration screen. It is a list variable. Each member of the list is a single pattern/action pair, or it can be a file which contains zero or more lines of pattern/action pairs. The only way to create a scores file is to use the InsertFile command in the Setup/Rules/SetScores screen with a filename which doesn't yet exist. Then use the Shuffle command to move existing scoring patterns into the file. This isn't very convenient but it isn't thought that many users will need this functionality. The purpose of scoring files is for sharing scoring rules. _personal-name_ Personal configuration file only. User's full personal name. On UNIX systems, the default is taken from the accounts data base (/etc/passwd). The easiest way to change the full From address is with the customized-hdrs variable. _personal-print-category_ Personal configuration file only. This is the category that the default print command belongs to. There are three categories. Category 1 is an attached printer which uses the ANSI escape sequence, category 2 is the standard system print command, and category 3 is the set of custom printer commands defined by the user. This just helps _Pine_ figure out where to put the cursor when the user runs the _Setup/Printer_ command. This is not used by _PC-Pine_. _personal-print-command_ Personal configuration file only. This corresponds to the third category in the printer menu, the personally selected print commands. This variable contains the list of custom commands that the user has entered in the _Setup/Printer_ screen. This is not used by _PC-Pine_. _postponed-folder_ The folder where postponed messages are stored. The default is _postponed-msgs_ (Unix) or _POSTPOND_ (PC). _print-font-name_ Winsock version of _PC-Pine_ only. _print-font-size_ Winsock version of _PC-Pine_ only. _print-font-style_ Winsock version of _PC-Pine_ only. _printer_ Personal configuration file only. This is the current setting for a user's printer. This variable is set from _Pine_'s _Setup/Printer_ screen. _prompt-background-color_ _prompt-foreground-color_ Prompt Color. _pruned-folders_ This variable allows you to define a list of one or more folders that _Pine_ will offer to prune for you in the same way it automatically offers to prune your "sent-mail" folder each month. Each folder in this list must be a folder in your default folder collection (the first folder collection if you have more than one), and it is just the relative name of the folder in the collection, not the fully-qualified name. It is similar to sent-mail. Instead of something like pruned-folders={servername}mail/folder the correct value to use would be folder There is an assumption here that your first collection is the folders in {servername}mail Once a month, for each folder listed, _Pine_ will offer to move the contents of the folder to a new folder of the same name but with the previous month's date appended. _Pine_ will then look for any such date-appended folder names created for a previous month, and offer each one it finds for deletion. If you decline the first offer, no mail is moved and no new folder is created. The new folders will be created in your default folder collection. _pruning-rule_ By default, _Pine_ will ask at the beginning of each month whether or not you want to rename your sent-mail folder to a name like sent-mail-month-year. (See the feature prune-uses-yyyy-mm to change the format of the folder to sent-mail-yyyy-mm.) It will also ask whether you would like to delete old sent-mail folders. If you have defined read-message-folder or pruned-folders _Pine_ will also ask about pruning those folders. With this option you may provide an automatic answer to the rename questions and you may tell _Pine_ to not ask about deleting old folders. _quote1-background-color_ _quote1-foreground-color_ _quote2-background-color_ _quote2-foreground-color_ _quote3-background-color_ _quote3-foreground-color_ Quote Colors. _quote-suppression-threshold_ This option should be used with care. It will cause some of the quoted text to be eliminated from the display when viewing a message in the MESSAGE TEXT screen. For example, if you set the Quote-Suppression-Threshold to the value "5", this will cause quoted text that is longer than five lines to be truncated. Quoted text of five or fewer consecutive lines will be displayed in its entirety. Quoted text of more than six lines will have the first five lines displayed followed by a line that looks something like [ 12 lines of quoted text hidden from view ] As a special case, if exactly one line of quoted text would be hidden, the entire quote will be shown instead. So for the above example, quoted text which is exactly six lines long will will be shown in its entirety. (In other words, instead of hiding a single line and adding a line that announces that one line was hidden, the line is just shown.) If the sender of a message has carefully chosen the quotes that he or she includes, hiding those quotes may change the meaning of the message. For that reason, _Pine_ requires that when you want to set the value of this variable to something less than four lines, you actually have to set it to the negative of that number. So if you want to set this option to "3", you actually have to set it to "-3". The only purpose of this is to get you to think about whether or not you really want to do this! If you want to delete all quoted text you set the value of this option to the special value "-10". The legal values for this option are 0 Default, don't hide anything -1,-2,-3 Suppress quote lines past 1, 2, or 3 lines 4,5,6,... Suppress if more than that many lines -10 Suppress all quoted lines If you set this option to a non-default value you may sometimes wish to view the quoted text that is not shown. When this is the case, the HdrMode (Header Mode) command may be used to show the hidden text. Typing the "H" command once will show the hidden text. Typing a second "H" will also turn on Full Header mode. The presence or absence of the HdrMode command is determined by the "Enable-Full-Header-Cmd" Feature-List option in your _Pine_ configuration, so you will want to be sure to turn that on if you use quote suppression. For the purposes of this option, a quote is a line that begins with the character ">". Quotes are only suppressed when displaying a message on the screen. The entire quote will be left intact when printing or forwarding or something similar. _read-message-folder_ If set, mail in the _INBOX_ that has been read but not deleted is moved here, or rather, the user is asked whether or not he or she wants to move it here upon quitting _Pine_. _remote-abook-history_ Sets how many extra copies of remote address book data will be kept in each remote address book folder. The default is three. These extra copies are simply old versions of the data. Each time a change is made a new copy of the address book data is appended to the folder. Old copies are trimmed, if possible, when _Pine_ exits. An old copy can be put back into use by deleting and expunging newer versions of the data from the folder. Don't delete the first message from the folder. It is a special header message for the remote address book and it must be there. This is to prevent regular folders from being used as remote address book folders and having their data destroyed. _remote-abook-metafile_ Personal configuration file only. This is usually set by _Pine_ and is the name of a file that contains data about remote address books and remote configuration files. _remote-abook-validity_ Sets the minimum number of minutes that a remote address book will be considered up to date. Whenever an entry contained in a remote address book is used, if more than this many minutes have passed since the last check the remote server will be queried to see if the address book has changed. If it has changed, the local copy is updated. The default value is five minutes. The special value of -1 means never check. The special value of zero means only check when the address book is first opened. No matter what the value, the validity check is always done when the address book is about to be changed by the user. The check can be initiated manually by typing _^L_ (Ctrl-L) while in the address book maintenance screen for the remote address book. _quote-replace-string_ This option specifies what string to use as a quote when _viewing_ a message. The standard way of quoting messages when replying is the string "> " (quote space). With this variable set, viewing a message will replace occurrences of "> " with the replacement string. This setting works best when Reply-Indent-String or the equivalent setting in your correspondents' mail programs is set to the default "> ", but it will also work fine with the Reply-Indent-String set to ">". By default, this setting will only work on messages that are flowed, which is the default way of sending messages for many mail clients including versions of Pine after 4.60. Enable the feature Quote-Replace-Nonflowed to also have quote-replacement performed on non-flowed messages. Setting this option will replace ">" and "> " with the new setting. This string may include trailing spaces. To preserve those spaces enclose the full string in double quotes. No padding to separate the text of the message from the quote string is added. This means that if you do not add trailing spaces to the value of this variable, text will be displayed right next to the quote string, which may be undesirable. This can be avoided by adding a new string separated by a space from your selection of quote string replacement. This last string will be used for padding. For example, setting this variable to ">" " " has the effect of setting ">" as the quote-replace-string, with the text padded by a space from the last quote string to make it more readable. One possible setting for this variable could be " " (four spaces wrapped in quotes), which would have the effect of indenting each level of quoting four spaces and removing the ">"'s. Different levels of quoting could be made more discernible by setting colors for quoted text. Replying to or forwarding the viewed message will preserve the original formatting of the message, so quote-replacement will not be performed on messages that are being composed. _reply-indent-string_ This variable specifies an aspect of _Pine_'s _Reply_ command. When a message is replied to and the text of the message is included, the included text usually has the string "> " prepended to each line indicating it is quoted text. This option specifies a different value for that string. If you wish to use a string which begins or ends with a space, enclose the string in double quotes. Besides simple text, the prepended string can be based on the message being replied to. The following tokens are substituted for the message's corresponding value: _FROM_ This token gets replaced with the message sender's "username". At most six characters are used. _NICK_ This token gets replaced with the nickname of the message sender's address as found in your addressbook. If no addressbook entry is found, Pine replaces the characters "_NICK_" with nothing. At most six characters are used. _INIT_ This token gets replaced with the initials of the sender of the message. When the enable-reply-indent-string-editing feature is enabled, you are given the opportunity to edit the string, whether it is the default or one automatically generated using the above tokens. _reply-leadin_ This variable specifies an aspect of _Pine_'s _Reply_ command. When a message is replied to and the text of the message is included, that text has an introductory line preceding it. The normal default if you don't set this variable looks something like: On Sat, 24 Oct 1998, Fred Flintstone wrote: where the day of the week is only included if it is available in the original message. You may replace this default with text of your own. The text may contain tokens which are replaced with text which depends on the message you are replying to. For example, the default is equivalent to: On _DAYDATE_, _FROM_ wrote: The list of available tokens is here. For the adventurous, there is a way to conditionally include text based on whether or not a token would result in specific replacement text. For example, you could include some text based on whether or not the _NEWS_ token would result in any newsgroups if it was used. It's explained in detail here. If your _Reply-Leadin_ turns out to be longer than 80 characters when replying to a particular message, it is shortened. In the very unlikely event that you want to include a literal token in the introduction line you must precede it with a backslash character. For example, \_DAYDATE_ = _DAYDATE_ would produce something like _DAYDATE_ = Sat, 24 Oct 1998 It is not possible to have a literal backslash followed by an expanded token. _reverse-background-color_ _reverse-foreground-color_ Reverse Color. _rsh-command_ Sets the format of the command used to open a UNIX remote shell connection. The default is "%s %s -l %s exec /etc/r%sd". All four "%s" entries MUST exist in the provided command. The first is for the command's pathname, the second is for the host to connnect to, the third is for the user to connect as, and the fourth is for the connection method (typically imap). _rsh-open-timeout_ Sets the time in seconds that _Pine_ will attempt to open a UNIX remote shell connection. The default is 15, the minimum non-zero value is 5, and the maximum is unlimited. If this is set to zero rsh connections will be completely disabled. _rsh-path_ Sets the name of the command used to open a UNIX remote shell connection. The default is typically /usr/ucb/rsh. _saved-msg-name-rule_ Determines default folder name when _Sav_ing. If set to _default-folder_ (which is the default setting), then _Pine_ will offer the folder "saved-messages" (UNIX) or "SAVEMAIL" (PC) for _Sav_ing messages. The default folder offered in this way may be changed by using the configuration variable default-saved-msg-folder. If this rule is set to _last-folder-used_, _Pine_ offers to _Save_ to the folder you last successfully _Saved_ a message to (this session). The first time you _Save_ a message in a session, _Pine_ offers to _Save_ the message to the default folder. Choosing any of the _by-_ options causes _Pine_ to attempt to get the chosen option's value for the message being _Saved_ (or for the first message being Saved if using an aggregate Save). For example, if _by-from_ is chosen, _Pine_ attempts to get the value of who the message came from (i.e. the from address). _Pine_ then attempts to _Save_ the message to a folder matching that value. If _by-from_ is chosen and no value is obtained, _Pine_ uses _by-sender_. The opposite is also true. If _by-recipient_ was chosen and the message was posted to a newsgroup, _Pine_ will use the newsgroup name. If _by-replyto_ is chosen and no value is obtained, _Pine_ uses _by-from_. If any of the "by-realname" options are chosen, _Pine_ will attempt to use the personal name part of the address instead of the mailbox part. If any of the "by-nick" options are chosen, the address is looked up in your address book and if found, the nickname for that entry is used. Only simple address book entries are checked, not distribution lists. Similarly, if any of the "by-fcc" options are chosen, the fcc from the corresponding address book entry is used. If by-realname, or the by-nick or by-fcc lookups result in no value, then if the chosen option ends with the "then-from", "then-sender", "then-replyto", or "then-recip" suffix, _Pine_ reverts to the same behavior as "by-from", "by-sender", "by-replyto", or "by-recip" depending on which option was specified. If the chosen option doesn't end with one of the "then-" suffixes, then _Pine_ reverts to the default folder when no match is found in the address book. Here is an example to make some of the options clearer. If the message is From Fred Flintstone and this rule is set to "by-from", then the default folder offered in the save dialog would be "flint". If this rule is set to "by-realname-of-from" then the default would be "Fred Flintstone". If this rule is set to "by-nick-of-from" then _Pine_ will search for the address "flint@bedrock.org" in your address book. If an entry is found and it has a nickname associated with it, that nickname will be offered as the default folder. If not, the default saved message folder will be offered as the default. If this rule is set to "by-fcc-of-from" then _Pine_ will search for the address "flint@bedrock.org" in your address book. If an entry is found and it has an Fcc associated with it, that Fcc will be offered as the default folder. If not, the default saved message folder will be offered as the default. If this rule is set to "by-nick-of-from-then-from" then _Pine_ will search for the address "flint@bedrock.org" in your address book. If an entry is found and it has a nickname associated with it, that nickname will be offered as the default folder. If it is not found (or has no nickname) then the default offered will be the same as it would be for the "by-from" rule. That is, it would be "flint" _scroll-margin_ This option controls when _Pine_'s line-by-line scrolling occurs. Typically, when a selected item is at the top or bottom screen edge and the UP or DOWN (and Ctrl-P or Ctrl-N) keys are pressed, the displayed items are scrolled down or up by a single line. This option allows you to tell _Pine_ the number of lines from the top and bottom screen edge that line-by-line scrolling should occur. For example, setting this value to one (1) will cause _Pine_ to scroll the display when you move to select an item on the display's top or bottom edge (instead of moving when you move off the edge of the screen). By default, this variable is zero (0), indicating that scrolling happens when you move up or down to select an item immediately off the display's top or bottom edge. _selectable-item-background-color_ _selectable-item-foreground-color_ Selectable-item Color. _sending-filters_ This option defines a list of text-filtering commands (programs and scripts) that may be selectively invoked to process a message just before it is sent. If set, the Composer's _^X Send_ command will allow you to select which filter (or none) to apply to the message before it is sent. For security reasons, the full path of the filter program must be specified. Sending filters do not work with _PC-Pine_ and sending filters are not used if the feature send-without-confirm is set. Command Modifying Tokens: __RECIPIENTS__ When the command is executed, this token is replaced with the space delimited list of recipients of the message being sent. __TMPFILE__ When the command is executed, this token is replaced with the path and name of the temporary file containing the text to be filtered. _Pine_ expects the filter to replace this data with the filter's result. NOTE: Use of this token implies that the text to be filtered is not piped into standard input of the executed command and its standard output is ignored. _Pine_ restores the tty modes before invoking the filter in case the filter interacts with the user via its own standard input and output. __RESULTFILE__ When the command is executed, this token is replaced with the path and name of a temporary file intended to contain a status message from the filter. _Pine_ displays this in the message status field. __DATAFILE__ When the command is executed, this token is replaced in the command line with the path and name of a temporary file that _Pine_ creates once per session and deletes upon exit. The file is intended to be used by the filter to store state information between instances of the filter. __PREPENDKEY__ When the command is executed, this token indicates that a random number will be passed down the input stream before the message text. It is not included as a command-line argument. This number could be used as a session key. It is sent in this way to improve security. The number is unique to the current _Pine_ session and is only generated once per session. __INCLUDEALLHDRS__ When the command is executed, this token indicates that the headers of the message will be passed down the input stream before the message text. It is not included as a command-line argument. The filter should, of course, remove the headers before returning control to _Pine_. __MIMETYPE__ When the command is executed, this token is replaced in the command name with a temporary file name used to accept any new MIME Content-Type information necessitated by the output of the filter. Upon the filter's exit, if the file contains new MIME type information, _Pine_ verifies its format and replaces the outgoing message's MIME type information with that contained in the file. This is basically a cheap way of sending something other than Text/Plain. _sendmail-path_ This names the path to an alternative program, and any necessary arguments, to be used in posting mail messages. See the section on SMTP and Sendmail for more details. _signature-file_ This is the name of a file which will be automatically inserted into outgoing messages. It typically contains information such as your name, email address and organizational affiliation. _Pine_ adds the signature into the message as soon as you enter the composer so you can choose to remove it or edit it on a message by message basis. Signature file placement in message replies is controlled by the signature-at-bottom setting in the feature list. This defaults to ~/.signature on UNIX and \PINE.SIG on a PC. To create or edit your signature file choose Setup from the Main Menu and then select S for Signature (Main/Setup/Signature). This puts you into the Signature Editor where you can enter a _few_ lines of text containing your identity and affiliation. If the filename is followed by a vertical bar (|) then instead of reading the contents of the file the file is assumed to be a program which will produce the text to be used on its standard output. The program can't have any arguments and doesn't receive any input from _Pine_, but the rest of the processing works as if the contents came from a file. Instead of storing the data in a local file, the signature data may be stored remotely in an IMAP folder. In order to do this, you must use a remote name for the file. A remote signature-file name might look like: {myimaphost.myschool.k12.wa.us}mail/signature or, if you have an SSL-capable version of _Pine_, you might try {myimaphost.myschool.k12.wa.us/user=loginname/ssl}mail/signature The syntax used here is the same as the syntax used for remote configuration files from the command line. Note that you may not access an existing signature file remotely, you have to create a new _folder_ which contains the signature data. If the name you use here for the signature file is a remote name, then when you edit the file from the Setup/Signature command the data will be stored remotely in the folder. You aren't required to do anything special to create the folder, it gets created automatically if you use a remote name. Besides regular text, the signature file may also contain (or a signature program may produce) tokens which are replaced with text which usually depends on the message you are replying to or forwarding. For example, if the signature file contains the token _DATE_ anywhere in the text, then that token is replaced by the date the message you are replying to or forwarding was sent. If it contains _CURDATE_ that is replaced with the current date. The first is an example of a token which depends on the message you are replying to (or forwarding) and the second is an example which doesn't depend on anything other than the current date. You have to be a little careful with this facility since tokens which depend on the message you are replying to or forwarding will be replaced by nothing in the case where you are composing a new message from scratch. The use of roles may help you in this respect. It allows you to use different signature files in different cases. The list of tokens available for use in the signature file is here. Instead of, or along with the use of _roles_ to give you different signature files in different situations, there is also a way to conditionally include text based on whether or not a token would result in specific replacement text. For example, you could include some text based on whether or not the _NEWS_ token would result in any newsgroups if it was used. This is explained in detail here. This isn't for the faint of heart. In the very unlikely event that you want to include a literal token in the signature you must precede it with a backslash character. For example, \_DAYDATE_ = _DAYDATE_ would produce something like _DAYDATE_ = Sat, 24 Oct 1998 It is not possible to have a literal backslash followed by an expanded token. _signature-background-color_ _signature-foreground-color_ Signature Color. _smtp-server_ One or more SMTP servers (host name or IP address) which _Pine_ will use for outgoing mail. If not set, _Pine_ passes outgoing email to the _sendmail_ program on the local machine. _PC-Pine_ users must have this variable set in order to send mail as they have no _sendmail_ program. Your SMTP server may offer SMTP AUTH authentication. It may even require it. If your SMTP server offers SMTP AUTH authentication you may specify a "user" name parameter to cause Pine to attempt to authenticate. This parameter requires an associated value, the username identifier with which to establish the server connection. An example might be: smtpserver.example.com/user=katie If AUTH authentication is offered by the server, this will cause _Pine_ to attempt to use it. If AUTH authentication is not offered by the server, this will cause _Pine_ to fail sending with an error similar to: Error: SMTP authentication not available Another type of authentication that is used by some ISPs is called "POP before SMTP" or "IMAP before SMTP", which means that you have to authenticate yourself to the POP or IMAP server by opening a mailbox before you can send mail. To do this, you usually only have to open your INBOX. You may tell _Pine_ to use the Message Submission port (587) instead of the SMTP port (25) by including the "submit" parameter in this option. At this time "/submit" is simply equivalent to specifying port 587, though it may imply more than that at some point in the future. Some ISPs are blocking port 25 in order to reduce the amount of spam being sent to their users. You may find that the submit option allows you to get around such a block. smtpserver.example.com/submit To specify any non-standard port number on the SMTP server you may follow the hostname with a colon followed by the portnumber. smtpserver.example.com:12345 Normally, when a connection is made to the Smtp-Server _Pine_ will attempt to negotiate a secure (encrypted) session using Transport Layer Security (TLS). If that fails then a non-encrypted connection will be attempted instead. You may specify that a TLS connection is required if you wish. If you append "/tls" to the name then the connection will fail instead of falling back to a non-secure connection. smtpserver.example.com/tls See the SMTP Servers section or the Server Name Syntax section for some more details. _sort-key_ This variable sets up the default Message Index sorting. The default is to sort by arrival order (the order the messages arrived in the folder). It has the same functionality as the _-sort_ command line argument and the _$_ command in the "Folder Index". If a _sort-key_ is set, then all folders open during the session will have that as the default sort order. _speller_ This option affects the behavior of the _^T_ (spell check) command in the Composer. It specifies the program invoked by _^T_ in the Composer. By default, _Pine_ uses the system's "spell" command. _Pine_ will use the command defined by this option (if any) instead. When invoking the spell-checking program, _Pine_ appends a tempfile name (where the message is passed) to the command line. _Pine_ expects the speller to correct the spelling in that file. When you exit from the speller program _Pine_ will read the tmpfile back into the composer. For Unix _Pine_ the program _ispell_ works well as an alternate spell checker. If your Unix system has _ispell_ it is probably reasonable to make it the default speller by configuring it as the default in the system configuration file, /usr/local/lib/pine.conf. If this option is not set, then the system's _spell_ command is used. The spell command does not work the same as the alternate speller. It produces a list of misspelled words on its standard output, instead, and doesn't take a tempfile as an argument. Don't set this speller option to the standard Unix spell command. That won't work. If you want to use the standard Unix spell command, set the speller option to nothing. _ssh-command_ Sets the format of the command used to open a UNIX secure shell connection. The default is "%s %s -l %s exec /etc/r%sd". All four "%s" entries MUST exist in the provided command. The first is for the command's pathname, the second is for the host to connnect to, the third is for the user to connect as, and the fourth is for the connection method (typically imap). _ssh-open-timeout_ Sets the time in seconds that _Pine_ will attempt to open a UNIX secure shell connection. The default is 15, the minimum non-zero value is 5, and the maximum is unlimited. If this is set to zero ssh connections will be completely disabled. _ssh-path_ Sets the name of the command used to open a UNIX secure shell connection. The default is typically /usr/bin/ssh. _standard-printer_ System-wide configuration file only. Specifies a list of commands for category 2 of the _Setup/Printer_ screen, the standard print command section. This is not used by _PC-Pine_. _status-background-color_ _status-foreground-color_ Status Color. _status-message-delay_ This option has evolved over time, causing the possible values to be counter-intuitive. Read carefully before you set this option. First we explain what the option does, then there is a longer discussion following that. If this is set to zero, the default value, it has _no_ effect. Positive and negative values serve two similar, but different purposes. If it is set to a positive number, it causes the cursor to move to the status line whenever a status message is printed and pause there for this many seconds. It will probably only be useful if the show-cursor feature is also turned on. Setting this option to a postive number can only be used to _increase_ the status message delay. This may be useful for Braille displays, or other non-traditional displays. If it is set to a negative number the interpretation is a bit complicated. Negative numbers are used to _decrease_ the amount of delay _Pine_ uses to allow you to read important status messages. Of course, this may cause you to miss some important messages. If you see a message flash by but miss what it says you can use the Journal command from the Main menu to read it. If you set this option to a negative value, the delay will be no more than one second less than the absolute value of the value you set. So if you set it to -1, the delay will be no more than zero seconds, no delay at all. If you set it to -2, the delay will be no more than 1 second. And so on, -3 is 2 seconds, -4 is 3 seconds, ... If the delay that _Pine_ would have used by default is less than this delay, then the smaller delay set by _Pine_ will be used. Setting this option to a negative value can only reduce the amount of delay, never increase it. Here is a more detailed explanation. Status messages are the messages which show up spontaneously in the status message line, the third line from the bottom of the screen. By default, _Pine_ assigns each status message it produces a minimum display time. Some status messages have a minimum display time of zero. You can see an example of such a message by paging up in this help text until you reach the top of the screen. If you try to page past the top you will see the message [Already at start of help text] in the status line. If there is another more important use of the status message line this message might be replaced quickly, or it even might not be shown at all. However, if there is no reason to get rid of the message, it might stay there for several seconds while you read the help. An example where it is replaced immediately happens when you page up in the help text past the top of the screen, but then type the "WhereIs" command right after paging up. The message will disappear immediately without causing a delay (unless you have set this option to a positive value) to allow you to type input for the "WhereIs" command. Since it isn't a very important message, _Pine_ has set its minimum display time to zero seconds. Other messages have minimum display times of three or more seconds. These are usually error messages that _Pine_ thinks you ought to see. For example, it might be a message about a failed Save or a failed folder open. It is often the case that this minimum display time won't delay you in any way because the status message line is not needed for another reason. However, there are times when _Pine_ has to delay what it is doing in order to display a status message for the minimum display time. This happens when a message is being displayed and _Pine_ wants to ask for input from the keyboard. For example, when you Save a message you use the status message line. You get a prompt there asking for the name of the folder to save to. If there is a status message being displayed that has not yet displayed for its minimum time _Pine_ will display that status message surrounded with the characters > and < to show you that it is delaying. That might happen, for example, if you tried to save to a folder that caused an error, then followed that immediately with another Save command. You might find yourself waiting for a status message like [>Can't get write access to mailbox, access is readonly<] to finish displaying for three seconds. If that is something you find happening to you frequently, you may use negative values of this option to decrease or eliminate that delay, at the risk of missing the message. _stay-open-folders_ This option affects low-level behavior of _Pine_. There is no default value for this option. It is related to the options Preopen-Stayopen-Folders, Max-Remote-Connections, and Offer-Expunge-On-Stayopen-Folders. Note: changes made to this list take effect the next time you open a folder in the list. This is a list of folders that will be permanently kept open once they are first opened. The names in this list may be either the nickname of an Incoming folder or the full technical specification of a folder. The folders in this list need not be remote IMAP folders, they could usefully be local folders, as well. If a folder in the list is a newsgroup or is not accessed either locally or via IMAP, then the entry will be ignored. For example, folders accessed via NNTP or POP3 will not be kept open, since the way that new mail is found with those protocols involves closing and reopening the connection. Once a Stay Open folder has been opened, new-mail checking will continue to happen on that folder for the rest of the _Pine_ session. Your INBOX is always implicitly included in this Stay-Open list and doesn't need to be added explicitly. Another difference that you may notice between a Stay Open folder and a non-Stay Open folder is which message is selected as the current message when you enter the folder index. Normally, the starting position for an incoming folder (which most Stay Open folders will likely be) is controlled by the Incoming-Startup-Rule. However, if a folder is a Stay Open folder, when you re-enter the folder after the first time the current message will be the same as it was when you left the folder. An exception is made if you use the TAB command to get to the folder. In that case, the message number will be incremented by one from what it was when you left the folder. The above special behavior is thought to be useful. However, it is special and different from what you might at first expect. The feature Use-Regular-Startup-Rule-for-Stayopen-Folders may be used to turn off this special treatment. If the message that was current when you left the folder no longer exists, then the regular startup rule will be used instead. _tcp-open-timeout_ Sets the time in seconds that _Pine_ will attempt to open a network connection. The default is 30, the minimum is 5, and the maximum is system defined (typically 75). If a connection has not completed within this many seconds _Pine_ will give up and consider it a failed connection. _tcp-query-timeout_ When _Pine_ times out a network read or write it will normally just display a message saying "Still waiting". However, if enough time has elapsed since it started waiting it will offer to let you break the connection. That amount of time is set by this option, which defaults to 60 seconds, has a minimum of 5 seconds, and a maximum of 1000 seconds. _tcp-read-warning-timeout_ Sets the time in seconds that _Pine_ will wait for a network read before warning you that things are moving slowly and possibly giving you the option to break the connection. The default is 15 seconds. The minimum is 5 seconds and the maximumn is 1000 seconds. _threading-display-style_ When a folder is sorted by Threads or OrderedSubject, this option will affect the MESSAGE INDEX display. By default, _Pine_ will display the MESSAGE INDEX in the "show-thread-structure" style if a folder is sorted by Threads or OrderedSubject. The possible values are: _none_ Regular index display. The same index line as would be displayed without threading is used. The only difference will be in the order of the messages. _show-thread-structure_ Threaded Subjects will be indented and vertical bars and horizontal lines will be added to make it easier to see the relationships among the messages in a thread (a conversation). _mutt-like_ This is the same as the option above except that the Subject is suppressed (is blank) if it matches the previous Subject in the thread. The name comes from the email client Mutt. Here is an example of what a mutt-like index might look like. In this example, the first column represents the message number, the threading-index-style is set to "regular-index-with-expanded-threads", and the Threading-Lastreply-Character is set to a backslash: 1 Some topic 2 . Subject original message in thread 3 |-> reply to 2 4 . |-> another reply to 2 5 . | \-> reply to 4 6 . | \-> reply to 5 7 | \-> reply to 6 8 |-> another reply to 2 9 . |->New subject another reply to 2 but with a New subject 10 | |-> reply to 9 11 | \-> another reply to 9 12 | \-> reply to 11 13 \-> final reply to 2 14 Next topic _indent-subject-1_ Threaded Subjects will be indented one space per level of the conversation. The bars and lines that show up in the show-thread-structure display will not be there with this style. _indent-subject-2_ Same as above but indent two spaces per level instead of one space. _indent-from-1_ Similar to indent-subject-1, except that instead of indenting the Subject field one space the From field of a thread will be indented one space per level of the conversation. _indent-from-2_ Same as above but indent two spaces per level instead of one space. _show-structure-in-from_ The structure of the thread is illustrated with indenting, vertical bars, and horizontal lines just like with the show-thread-structure option, but the From field is used to show the relationships instead of the Subject field. _threading-expanded-character_ The Threading-Expanded-Character option has a small effect on the MESSAGE INDEX display when using a threading-display-style other than _none_. The value of this option is a single character. This character is used to indicate that part of a thread has been expanded and could be collapsed if desired with the "/" Collapse/Expand command. By default, the value of this option is a dot (.). If this option is set to the Empty Value, then the column (and the following blank column) will be deleted from the display. This option is closely related to the threading-indicator-character option. Another similar option which affects the thread display is the threading-lastreply-character option. _threading-index-style_ When a folder is sorted by Threads or OrderedSubject, this option will affect the INDEX displays. The possible values are: _regular-index-with-expanded-threads_ This is the default display. If the configuration option threading-display-style is set to something other than "none", then this setting will cause _Pine_ to start off with a MESSAGE INDEX with all of the threads expanded. That is, each message will have a line in the MESSAGE INDEX display. The Collapse/Expand command (/) may be used to manually collapse or expand a thread or subthread (see also slash-collapses-entire-thread). This setting affects the display when the folder is first threaded. The collapsed state may also be re-initialized by re-sorting the folder manually using the SortIndex command ($). After re-sorting the threads will once again all be expanded, even if you have previously collapsed some of them. If "threading-display-style" is set to "none", then the display will be the regular default Pine MESSAGE INDEX, but sorted in a different order. _regular-index-with-collapsed-threads_ If the configuration option threading-display-style is set to something other than "none", then this setting will cause _Pine_ to start out with all of the threads collapsed instead of starting out with all of the threads expanded. The Collapse/Expand command (/) may be used to manually collapse or expand a thread or subthread (see also slash-collapses-entire-thread). This setting affects the display when the folder is first threaded. The collapsed state may also be re-initialized by re-sorting the folder manually using the SortIndex command ($). After re-sorting the threads will once again all be collapsed, even if you have previously expanded some of them. _separate-index-screen-always_ With this setting and the next, you will see an index of threads instead of an index of messages, provided you have sorted by Threads or OrderedSubject. The THREAD INDEX contains a '*' in the first column if any message in the thread is marked Important. If not, it contains a '+' if any message in the thread is to you. The second column is blank. The third column contains a 'D' if all of the messages in the thread are deleted. Otherwise, it contains an 'N' if any of the messages in the thread are New. When you view a particular thread from the THREAD INDEX you will be in the MESSAGE INDEX display but the index will only contain messages from the thread you are viewing. _separate-index-screen-except-for-single-messages_ This is very similar to the option above. When you are in the THREAD INDEX, one of the available commands is "ViewThd". With the setting "separate-index-screen-always" (the option above) when you view a particular thread you will be in the MESSAGE INDEX display and the index will only contain messages from the thread you are viewing. If the thread you are viewing consists of a single message, the MESSAGE INDEX will be an index with only one message in it. If you use this "separate-index-screen-except-for-single-messages" setting instead, then that index which contains a single message will be skipped and you will go directly from the THREAD INDEX into the MESSAGE VIEW screen. _threading-indicator-character_ The Threading-Indicator-Character option has a small effect on the MESSAGE INDEX display when using a threading-display-style other than _none_ and sorting by Threads or OrderedSubject. The value of this option is a single character. This character is used to indicate that part of a thread (a conversation) is hidden beneath a message. The message could be expanded if desired with the "/" Collapse/Expand command. By default, the value of this option is the greater than sign (>). If this option is set to the Empty Value, then the column (and the following blank column) will be deleted from the display. This option is closely related to the threading-expanded-character option. Another similar option which affects the thread display is the threading-lastreply-character option. _threading-lastreply-character_ The Threading-Lastreply-Character option has a small effect on the MESSAGE INDEX display when using a threading-display-style of _show-thread-structure_, _mutt-like_, or _show-structure-in-from_; and sorting by Threads or OrderedSubject. The value of this option is a single character. This character is used instead of the vertical line character when there are no more replies directly to the parent of the current message. It can be used to "round-off" the bottom of the vertical line by setting it to a character such as a backslash (\) or a backquote (`). By default, the value of this option is the vertical bar character (|). This option may not be set to the Empty Value. In that case, the default will be used instead. _tcp-write-warning-timeout_ Sets the time in seconds that _Pine_ will wait for a network write before warning you that things are moving slowly and possibly giving you the option to break the connection. The default is 0 which means it is unset. If set to a non-zero value, the minimum is 5 and the maximum is 1000. _title-background-color_ _title-foreground-color_ Title Color. _titlebar-color-style_ titlebar-color-style. _upload-command_ This option affects the behavior of the Composer's _^R_ (Read File) and _^J_ (Attach File, in the header) commands. It specifies a Unix program name, and any necessary command line arguments, that _Pine_ can use to transfer files from your personal computer into messages that you are composing. _upload-command-prefix_ This option is used in conjunction with the _upload-command_ option. It defines text to be written to the terminal emulator (via standard output) immediately prior to starting the upload command. This is useful for integrated serial line file transfer agents that permit command passing (e.g., Kermit's APC method). _url-viewers_ List of programs to use to open Internet URLs. This value affects _Pine_'s handling of URLs that are found in the text of messages you read. Normally, only URLs _Pine_ can handle directly are automatically offered for selection in the "Message Text" screen. When one or more comma delimited Web browsers capable of deciphering URLs on their command line are added here, _Pine_ will choose the first available browser to display URLs it doesn't recognize. Additionally, to support various connection methods and browsers, each entry in this list can begin with the special token _TEST(test-string)_. The test-string is a shell command that _Pine_ will run and which must exit with a status of zero for _Pine_ to consider that browser for use (the other criteria is that the browser must exist as a full path or a path relative to your home directory). Now for an example: url-viewers=_TEST("test -n '${DISPLAY}'")_ /usr/local/bin/netscape, /usr/local/bin/lynx, C:\BIN\NETSCAPE.BAT This example shows that for the first browser in the list to be used the environment variable DISPLAY must be defined. If it is, then the file /usr/local/bin/netscape must exist. If either condition is not met, then the file /usr/local/bin/lynx must exist. If it doesn't, then the final path and file must exist. Note that the last entry is a DOS/Windows path. This is one way to support _Pine_ running on more than one architecture with the same configuration file. _use-only-domain-name_ Can be set to _yes_ or _no._ Anything but _yes_ means _no._ If set to _yes_ the first label in the host name will be lopped off to get the domain name and the domain name will be used for outgoing mail and such. That is, if the host name is _carson.u.example.edu_ and this variable is set to _yes,_ then _u.example.edu_ will be used on outgoing mail. Only meaningful if user-domain is NOT set. _user-domain_ Sets the domain or host name for the user, overriding the system host or domain name. See the domain name section. The easiest way to change the full From address is with the customized-hdrs variable. _user-id_ _PC-Pine_ only and personal configuration file only. Sets the username that is placed on all outgoing messages. The username is the part of the address that comes before the "@". The easiest way to change the full From address is with the customized-hdrs variable. _user-input-timeout_ If this is set to an integer greater than zero, then this is the number of _hours_ to wait for user input before _Pine_ times out. If _Pine_ is in the midst of composing a message or is waiting for user response to a question, then it will not timeout. However, if _Pine_ is sitting idle waiting for the user to tell it what to do next and the user does not give any input for this many hours, _Pine_ will exit. No expunging or moving of read messages will take place. It will exit similarly to the way it would exit if it received a hangup signal. This may be useful for cleaning up unused _Pine_ sessions which have been forgotten by their owners. The _Pine_ developers envision system administrators setting this to a value of several hours (24?) so that it won't surprise a user who didn't want to be disconnected. _viewer-hdr-colors_ This variable holds the optional Header Colors and patterns which have been defined by the user. This is usually modified by using the Header Colors section of the Setup Color screen. _viewer-hdrs_ You may change the default list of headers that are viewed by listing the headers you want to view here. If the headers in your _viewer-hdrs_ list are present in the message, then they will be shown. The order of the headers you list will also be honored. If the special value _all-except_ is included as the first header in the _viewer-hdrs_ list, then all headers in the message except those in the list will be shown. The values are all case insensitive. _viewer-margin-left_ This variable controls the left-hand vertical margin's width in _Pine_'s Message Viewing screen. Its value is the number of space characters preceding each displayed line. For consistency with Viewer-Margin-Right, you may specify the column number to start in (column numbering begins with number 1) instead of the width of the margin by appending a lower case letter "c" to the number. For example, a value of "2c" means to start the text in column two, which is entirely equivalent to a value of "1", which means to leave a margin of 1 space. The default is a left margin of 0 (zero). Misconfigurations (for example, negative values or values with starting left columns greater than the ending right column) are silently ignored. If the number of columns for text between the Viewer-Margin-Left and the Viewer-Margin-Right is fewer than 8, then margins of zero will be used instead. _viewer-margin-right_ This variable controls the right-hand vertical margin's width in _Pine_'s Message Viewing screen. Its value is the number of space characters following each displayed line. You may specify the column number to end the text in (column numbering begins with number 1) instead of the width of the margin by appending a lower case letter "c" to the number. For example, a value of "76c" means to end the text in column 76. If the screen is 80 characters wide, this is equivalent to a value of "4", which means to leave a margin of 4 spaces. However, if you use different size screens at different times, then these two values are not equivalent. The default right margin is 4. Misconfigurations (for example, negative values or values with starting left columns greater than the ending right column) are silently ignored. If the number of columns for text between the Viewer-Margin-Left and the Viewer-Margin-Right is fewer than 8, then margins of zero will be used instead. _viewer-overlap_ This option specifies an aspect of _Pine_'s Message Viewing screen. When the space bar is used to page forward in a message, the number of lines specified by the _viewer-overlap_ variable will be repeated from the bottom of the screen. That is, if this was set to two lines, then the bottom two lines of the screen would be repeated on the top of the next screen. The normal default value is "2". _window-position_ Winsock version of _PC-Pine_ only. Window position in the format: CxR+X+Yn Where C and R are the window size in characters and X and Y are the screen position of the top left corner of the window. _________________________________________________________________ Configuration Features There are several features (options) which may be turned off or on. The configuration variable feature-list is a list of all the features that are turned on or off. If the name of a feature is in the list it will be turned on. If the name of a feature with the characters no- prepended is in the list, it will turn the feature off. This is useful for overriding system-wide defaults. This is because, unlike all the other configuration variables, the _feature-list_ is additive. That is, first the system-wide _feature-list_ is read and then the user's _feature-list_ is read. This makes it possible for the system manager to turn some of the features on by default while still allowing the user to cancel that default. For example, if the system manager has turned on the _allow-talk_ feature by default then a user may turn it back off by including the feature _no-allow-talk_ in his or her personal configuration file. Of course, these details are usually handled by _Pine_ when the user turns an option on or off from inside the _Setup/Config_ screen. System managers should take some care when turning on features by default. Some of the documentation assumes that all of the features are off by default, so it could be confusing for a user if some are on by default instead. Here is an alphabetical list of possible features. _allow-changing-from_ Prior to _Pine_ 4.00 there was a _compile_-time option called ALLOW_CHANGING_FROM. That has been replaced by a _runtime_ feature. If this feature is turned on then the From line can be changed just like all the other header fields that can be changed. See the configuration variables customized-hdrs and default-composer-hdrs for more information on editing headers. Beginning with _Pine_ 4.30 the default value for this feature has been changed from OFF to ON, so that editing of From headers is now allowed by default. _allow-talk_ Unix _Pine_ only. By default, permission for others to _talk_ to your terminal is turned off when you are running _Pine_. When this feature is set, permission is instead turned on. Note: The _talk_ program has nothing to do with _Pine_ or email. The _talk_ daemon on your system will attempt to print a message on your screen when someone else is trying to contact you. If you wish to see these messages while you are running _Pine_, you should enable this feature. If you do enable this feature and see a _talk_ message, you must suspend or quit _Pine_ before you can respond. _alternate-compose-menu_ This feature controls the menu that is displayed when Compose is selected. If set, a list of options will be presented, with each option representing the type of composition that could be used. This feature is most useful for users who want to avoid being prompted with each option separately, or who want to avoid the checking of remote postponed or form letter folders. The possible types of composition are: New, for starting a new composition. Note that if New is selected and roles are set, roles are checked for matches and applied according to the setting of the matching role. Interrupted, for continuing an interrupted composition. This option is only offered if an interrupted message folder is detected. Postponed, for continuing postponed compositions. This option is offered if a postponed-folder is set in the config _REGARDLESS OF_ whether or not the postponed folder actually exists. This option is especially handy for avoiding having to check for the existence of a remote postponed folder. Form, for using form letters. This option is offered if the form-letter-folder is set in the config, and is not checked for existence for reasons similar to those explained by the postponed option. setRole, for selecting a role to apply to a composition. _alternate-role-menu_ Normally the Role Command allows you to choose a role and compose a new message using that role. When this feature is set, the role command will first ask whether you want to Compose a new message, Forward the current message, Reply to the current message, or Bounce the current message. If you are not in the MESSAGE INDEX and are not viewing a message, then there is no current message and the question will be skipped. After you have chosen to Compose, Forward, Reply or Bounce you will then choose the role to be used. When Bouncing the "Set From" address is used for the Resent-From header, the "Set Fcc" value is used for the Fcc provided that the option "Fcc-On-Bounce" is turned on, and the "Use SMTP Server" value is used for the SMTP server, if set. Other actions of the role are ignored when Bouncing. _assume-slow-link_ This feature affects _Pine_'s display routines. If set, the normal inverse-video cursor (used to highlight the current item in a list) will be replaced by an _arrow_ cursor and other screen update optimizations for low-speed links (e.g. 2400 bps dialup connections) will be activated. One of the optimizations is that colored index lines (set up with Indexcolor Rules) will not be colored. This might be useful if _you_ know you have a slow speed link but for some reason _Pine_ doesn't know. _auto-move-read-msgs_ This feature controls an aspect of _Pine_'s behavior upon quitting. If set, and the read-message-folder variable is also set, then _Pine_ will automatically transfer all read messages from the _INBOX_ to the designated folder and mark them as deleted in the _INBOX_. Messages in the _INBOX_ marked with an _N_ (meaning New, or unseen) are not affected. _auto-open-next-unread_ This feature controls the behavior of the TAB key when traversing folders in the optional incoming-folders collection or in optional news-collections. When the TAB (Next New) key is pressed, and there are no more unseen messages in the current (incoming message or news) folder, _Pine_ will search the list of folders in the current collection for one containing New or Recent (new since the last time the folder was opened) messages. This behavior may be modified slightly with the Tab-Uses-Unseen-For-Next-Folder feature which causes _Pine_ to look for Unseen messages instead of Recent messages. By default, when such a folder is found, _Pine_ will ask whether you wish to open the folder. If this feature is set, _Pine_ will automatically open the folder without prompting. _auto-unzoom-after-apply_ If set, and if you are currently looking at a Zoomed Index view of selected messages, the _Apply_ command will do the operation you specify, but then will implicitly do an _UnZoom_, so that you will automatically be back in the normal Index view after the _Apply_. _auto-zoom-after-select_ If set, the _; select_ command will automatically perform a _Zoom_ after the _select_ is complete. _check-newmail-when-quitting_ If set, _Pine_ will check for new mail after you give the Quit command. If new mail has arrived since the previous check, you will be notified and given the choice of quitting or not quitting. _combined-addrbook-display_ This feature affects the address book display screens. Normally, expanding an address book from the ADDRESS BOOK LIST screen will cause the remaining address books and directory servers to disappear from the screen, leaving only the entries of the expanded address book. If this feature is set, then the other address books will remain on the screen, so that all of the address books can be present at once. The way that commands work won't be changed. For example, the Select All command will select all of the entries in the current address book, not all of the entries in all of the address books. The WhereIs command will change a little. It will search through all of the text on the screen plus all of the entries from expanded address books. When this feature is set, the setting of the feature expanded-view-of-addressbooks has an effect. _combined-folder-display_ This feature affects the folder list display screens. Normally, each folder list is viewed within its collection only. This command allows folder lists to be viewed within a single screen that combines the contents of all collections. The way that commands work won't be changed. For example, the Select All command will select all of the folders in the current collection, not all of the entries in all of the collections. The WhereIs command will change a little. It will search through all of the folders in the current collection as well as all the folder in any other expanded collection. When this feature is set, the setting of the feature expanded-view-of-folders has an effect. _combined-subdirectory-display_ This feature affects the Folder List screen when the combined-folder-display feature is enabled. Normally, selecting a directory from the Folder List takes you into a new screen displaying only the contents of that directory. Enabling this feature will cause the contents of the selected directory to be displayed within the boundaries of the Collection it is a part of. All previously displayed collections will remain in the screen. The way that commands work won't be changed. For example, the Select All command will select all of the folders in the directory, as opposed to all of the entries in all of the collections. The WhereIs command will change a little. It will search through all of the folders in the current collection as well as all the folder in any other expanded collection. _compose-cancel-confirm-uses-yes_ This feature affects what happens when you type ^C to cancel a composition. By default, if you attempt to cancel a composition by typing ^C, you will be asked to confirm the cancellation by typing a "C" for _C_onfirm. It logically ought to be a "Y" for _Y_es, but that is risky because the "^C Y" needed to cancel a message is close (on the keyboard) to the "^X Y" needed to send a message. If this feature is set the confirmation asked for will be a "_Y_es" instead of a "_C_onfirm" response. _compose-cut-from-cursor_ If set, the _^K_ command in the composer will cut from the current cursor position to the end of the line, rather than cutting the entire line. _compose-maps-delete-key-to-ctrl-d_ If set, Delete will be equivalent to ^D, and delete the current character. Normally _Pine_ defines the Delete key to be equivalent to ^H, which deletes the _previous_ character. _compose-rejects-unqualified-addrs_ If set, unqualified names entered as addresses will be treated as errors unless they match an addressbook nickname or are looked up successfully on an LDAP server. _Pine_ will not attempt to turn them into complete addresses by adding your local domain (which _Pine_ normally does by default). A complete (fully-qualified) address is one containing a username followed by an _@_ symbol, followed by a host or domain name (e.g. _jsmith@example.com_). An unqualified name is one without the _@_ symbol and host or domain name (e.g. _jsmith_). _compose-send-offers-first-filter_ If you have sending-filters configured, setting this feature will cause the first filter in the _sending-filters_ list to be offered as the default instead of _unfiltered_, the usual default. _compose-sets-newsgroup-without-confirm_ If you enter the composer while reading a newsgroup, you will normally be prompted to determine whether you intend the new message to be posted to the current newsgroup or not. If this feature is set, _Pine_ will not prompt you in this situation, and will assume that you do indeed wish to post to the newsgroup you are reading. _confirm-role-even-for-default_ If you have roles, when you Reply to or Forward a message, or Compose a new message, _Pine_ will search through your roles for one which matches. Normally, if no matches are found you will be placed into the composer with no opportunity to select a role. If this feature is set, then you will be asked to confirm that you don't want a role. This will give you the opportunity to select a role (with the ^T command). If you confirm no role with a Return, you will be placed in the composer with no role. You may also confirm with either an "N" or a "Y". These behave the same as if you pressed the Return. (The "N" and "Y" answers are available because they match what you might type if there was a role match.) If you are using the alternate form of the Compose command called "Role", then all of your roles will be available to you, independent of the value of this feauture and of the values set for all of Reply Use, Forward Use, and Compose Use. _continue-tab-without-confirm_ Normally, when you use the TAB NextNew command and there is a problem checking a folder, you are asked whether you want to continue with the search in the following folder or not. This gives you a chance to stop the NextNew processing. If this feature is set you will not be asked. It will be assumed that you want to continue. _delete-skips-deleted_ If set, this feature will cause the _Delete_ command to advance past other messages that are marked deleted. In other words, pressing _D_ will both mark the current message deleted and advance to the next message that is not marked deleted. _disable-2022-jp-conversions_ By default, UNIX _Pine_ will convert Japanese characters encoded as ISO-2022-JP data into EUC-JP and _PC-Pine_ will convert the ISO-2022-JP data into Shift-JIS before displaying it. Conversely, when sending mail, UNIX _Pine_ will convert EUC-JP into ISO-2022-JP and _PC-Pine_ will convert Shift-JIS into ISO-2022-JP. If this feature is set, those conversions are turned off. Most of _Pine_ is not set up to handle multi-byte characters or variable width characters. From time to time, your display will be garbled because _Pine_'s word wrapping code, which is not aware of the possibility that characters may be multi-byte, may wrap a line in the middle of a character. _Pico_ is also not able to edit Japanese data well so you may need to use an alternate editor when composing or replying to mail. _disable-busy-alarm_ If set, the spinning bar that sometimes appears in the status line will not appear when _Pine_ is busy. This might be useful if it is suspected that the alarm(2) system calls that _Pine_ uses to implement the busy spinner are suspected of causing a problem. _disable-charset-conversions_ By default, if your Character-Set configuration option is different from the character set of the message you are viewing, then _Pine_ will attempt to convert the characters in the message to the character set you have set in the Character-Set configuration option before sending them to your display. The currently supported conversions are between 8-bit character sets (e.g. between WINDOWS-1251 and KOI8-R), and from UTF-8 to any other character set. If this feature is set, the conversions are turned off. Conversion is only possible if the character being converted is present in both character sets. Many pairs of character sets have no characters in common. In that case, _Pine_ will not attempt any conversion. If there are some characters in common then _Pine_ will attempt to convert those and will display the unknown characters as question marks. The conversion of Japanese character sets from one encoding to another is controlled separately by the Disable-2022-JP-Conversions feature. _disable-config-cmd_ If set, the configuration screen _Setup/Config_ will not be available at all. _disable-keyboard-lock-cmd_ In the Main _Pine_ menu there is a Keyboard locking command (_KBLock_). If this feature is set, that command won't be available to the user. _disable-keymenu_ If set, the command key menu that normally appears on the bottom two lines of the screen will not usually be there. Asking for help with _^G_ or _?_ will cause the key menu to appear instead of causing the help message to come up. If you want to actually see the help text, another _^G_ or _?_ will show it to you. After the key menu has popped up with the help key it will remain there for an _O Other_ command but will disappear if any other command is typed. _disable-password-caching_ Normally, loginname/password combinations are cached in _Pine_ so that the user does not have to enter the same password more than once in a session. A disadvantage to this approach is that the password must be stored in the memory image of the running _Pine_ in order that it can be reused. In the event that _Pine_ crashes and produces a core dump, and that core dump is readable by others, the loginname and password could possibly be read from the core dump. If this hidden feature is set, then the passwords will not be cached and the user will have to retype the password whenever _Pine_ needs it. Even with this feature set there is still some chance that the core file will contain a password, so care should be taken to make the core files unreadable. NOTE: If PASSFILE caching is enabled, this does not disable it. That is a separate and independent feature. _disable-password-cmd_ If set the _Newpassword_ command usually available under the _Setup_ command will not be available. _disable-pipes-in-sigs_ If set it will be an error to append a vertical bar (|) to the name of a signature file. Appending a vertical bar normally causes the signature file to be executed to produce the signature. _disable-pipes-in-templates_ If set it will be an error to append a vertical bar (|) to the name of a template file. Appending a vertical bar normally causes the signature file to be executed to produce the signature. _disable-roles-setup-cmd_ If set the _Roles_ command usually available under the _Setup_ command will not be available. _disable-roles-sig-edit_ If set the roles editor in the _Setup/Roles_ command will not allow editing of signature files with the F subcommand. _disable-roles-template-edit_ If set the roles editor in the _Setup/Roles_ command will not allow editing of template files with the F subcommand. _disable-sender_ If set, _Pine_ will not generate a "Sender:" or "X-X-Sender" header. This may be desirable on a system which is virtually hosting many domains, and the sysadmin has other methods available for tracking a message to its originator. _disable-shared-namespaces_ If this hidden feature is set the automatic search for namespaces "ftp", "imapshared", and "imappublic" by the underlying library will be disabled. The reason this feature exists is because there are some implementations of system password lookup routines which are very slow when presented with a long loginname which does not exist. This feature could be set to prevent the delay at startup time when the names above are searched for in the password file. _disable-signature-edit-cmd_ If set the _Signature_ editing command usually available under the _Setup_ command will not be available. _disable-take-fullname-in-addresses_ Normally, when TakeAddr is used to copy an address or addresses from a message into an address book entry, _Pine_ will try to preserve the full name associated with each address in the list of addresses. The reason for this is so that if the entry is a list or later becomes a list, then information about the individual addresses in the list is preserved. If you would rather just have the simple addresses in the list of addresses, set this feature. For example, with the default setting you might see something like this in the ADDRESS BOOK editor after you type TakeAddr Nickname : nick Fullname : Bedrock Elders Fcc : Comment : Addresses : Fred Flintstone , Barney Rubble but with this feature set it would look like Nickname : nick Fullname : Bedrock Elders Fcc : Comment : Addresses : flint@bedrock.org, rubble@bedrock.org instead. Note the difference in the Addresses field. _disable-take-last-comma-first_ Normally, when _TakeAddr_ is used to copy an address from a message into an address book, _Pine_ will attempt to rewrite the full name of the address in the form: Last, First instead of First Last It does this because many people find it useful to sort by Last name instead of First name. If this feature is set, then the _TakeAddr_ command will not attempt to reverse the name in this manner. _disable-terminal-reset-for-display-filters_ UNIX Pine only. This feature affects _Pine_'s behavior when using Display-Filters. Normally, before the display filter is run, the terminal mode is reset to what it was before you started _Pine_. This may be necessary if the filter requires the use of the terminal. For example, it may need to interact with you. If you set this feature, then the terminal mode will not be reset. One thing that turning on this feature should fix is the coloring of quoted text in the message view, which breaks because the terminal reset resets the color state of the terminal (Color Configuration). _downgrade-multipart-to-text_ This feature affects _Pine_'s behavior when sending mail. Internet standards require _Pine_ to translate all non-ASCII characters in messages that it sends using MIME encoding. This encoding can be ostensibly broken for recipients if any agent between _Pine_ and the recipient, such as an email list expander, appends text to the message, such as list information or advertising. When sending such messages _Pine_ attempts to protect such encoding by placing extra MIME boundaries around the message text. These extra boundaries are invisible to recipients that use MIME-aware email programs (the vast majority). However, if you correspond with users of email programs that are not MIME-aware, or do not handle the extra boundaries gracefully, you can use this feature to prevent _Pine_ from including the extra MIME information. Of course, it will increase the likelihood that non-ASCII text you send may appear corrupt to the recipient. _enable-8bit-esmtp-negotiation_ This feature affects _Pine_'s behavior when sending mail. Internet standards require that all electronic mail messages traversing the global Internet consist of 7bit ASCII characters unless a pair of cooperating mail transfer agents explicitly agree to allow 8bit messages. In general, then, exchanging messages in non-ASCII characters requires MIME encoding. However, there are now Internet standards that allow for unencoded 8bit exchange of messages between cooperating systems. Setting this feature tells _Pine_ to try to negotiate unencoded 8bit transmission during the sending process. Should the negotiation fail, _Pine_ will fall back to its ordinary encoding rules. Note, this feature relies on your system's mail transport agent or configured smtp-server having the negotiation mechanism introduced in "Extended SMTP" (ESMTP) and the specific extension called _8BITMIME_. _enable-8bit-nntp-posting_ The Internet standard for exchanging USENET news messages (RFC-1036) specifies that USENET messages should conform to Internet mail standards and contain only 7bit characters, but much of the news transport software in use today is capable of successfully sending messages containing 8bit characters. Hence, many people believe that it is appropriate to send 8bit news messages without any MIME encoding. Moreover, there is no Internet standard for explicitly negotiating 8bit transfer, as there is for Internet email. Therefore, _Pine_ provides the option of posting unencoded 8bit news messages, though not as the default. Setting this feature will turn OFF _Pine_'s MIME encoding of newsgroup postings that contain 8bit characters. Note, articles may cross a path or pass through news transport software that is unsafe or even hostile to 8bit characters. At best this will only cause the posting to become garbled. The safest way to transmit 8bit characters is to leave _Pine_'s MIME encoding turned on, but recipients who lack MIME-aware tools are often annoyed when they receive MIME-encoded messages. _enable-aggregate-command-set_ Setting this feature enables the commands and subcommands that relate to performing operations on more than one message at a time. We call these "aggregate operations". In particular, the _; Select_, _A Apply_, and _Z Zoom_ commands are enabled by this feature. _Select_ is used to _tag_ one or more messages meeting the specified criteria. _Apply_ can then be used to apply any message command to all of the selected/tagged messages. Further, the _Zoom_ command allows you to toggle the "Folder Index" view between just those Selected and all messages in the folder. This feature also enables the _^X_ subcommand in the "Folder Index" _WhereIs_ command which causes all messages matching the _WhereIs_ argument to become selected. You may also use aggregate operations in the address book screens where you are operating on address book entries instead of on messages. _enable-alternate-editor-cmd_ If this feature is set, and the editor variable is not set, entering the _^__ (Control-underscore) key while composing a message will prompt you for the name of the editor you would like to use. If the environment variable $EDITOR is set, this value will be offered as a default. If the _editor_ variable is set, the _^__ key will activate the specified editor without prompting, in which case it is not necessary to set the _enable-alternate-editor-cmd_ feature. This feature is not available in _PC-Pine_. _enable-alternate-editor-implicitly_ If this feature and the editor variable are both set, _Pine_ will automatically activate the specified editor when the cursor is moved from the header of the message being composed into the message text. For replies, the alternate editor will be activated immediately. If this feature is set but the _editor_ variable is not set, then _Pine_ will automatically ask for the name of an alternate editor when the cursor is moved out of the headers, or if a reply is being done. This feature is not available in _PC-Pine_. _enable-arrow-navigation_ This feature controls the behavior of the left and right arrow keys. If set, the left and right arrow keys will operate like the usual navigation keys _<_ and _>_. If you set this feature, and do not like the changed behavior of the up/down arrow keys when navigating through the FOLDER LIST screen -- _first_ from column to column, if more than one folder is displayed per row, and _then_ from row to row -- you may either also wish to set the feature enable-arrow-navigation-relaxed, single-column-folder-list, or use the ^P/^N (instead of up/down arrow) keys to move up/down the list of folders in each column. _enable-arrow-navigation-relaxed_ This feature controls the behavior of the left and right arrow keys in the FOLDER LIST screen when the enable-arrow-navigation feature is enabled. Normally, when the "enable-arrow-navigation" feature is set, the left and right arrow keys in the Folder List screen strictly track the commands bound to the _<_ and _>_ keys, and the up and down arrow keys move the highlite bar to the previous and next folder or directory name. When enabled, this feature returns the left, right, up and down arrow key's functionality in the FOLDER LIST screen to what it was before enabling "enable-arrow-navigation". In other words, left and right arrows move the highlight bar to the left or right, and the up and down arrows move it up or down. _enable-background-sending_ If set, this feature enables a subcommand in the composer's _Send?_ confirmation prompt. The subcommand allows you to tell _Pine_ to handle the actual posting in the background. While this feature usually allows posting to appear to happen very fast, it has no affect on the actual delivery time it takes a message to arrive at its destination. This feature isn't supported on all systems. All DOS and Windows, as well as several Unix ports, do not recognize this feature. It is not possible to use background sending if the feature send-without-confirm is set. Error handling is significantly different when this feature is enabled. Any message posting failure results in the message being appended to your _Interrupted_ mail folder. When you type the _Compose_ command, _Pine_ will notice this folder and offer to extract any messages contained. Upon continuing a failed message, _Pine_ will display the nature of the failure in the status message line. Under extreme conditions, it is possible for message data to get lost. Do not enable this feature if you typically run close to any sort of disk-space limits or quotas. _enable-bounce-cmd_ Setting this feature enables the _B Bounce_ command, which will prompt for an address and _remail_ the message to the new recipient. This command is used to re-direct messages that you have received in error, or need to be redirected for some other reason (e.g. list moderation). The final recipient will see a header indicating that you have Resent the msg, but the message's From: header will show the original author of the message, and replies to it will go back to that author, and not to you. _enable-cruise-mode_ This feature affects _Pine_'s behavior when you hit the "Space Bar" at the end of a displayed message. Typically, _Pine_ complains that the end of the text has already been reached. Setting this feature causes such keystrokes to be interpreted as if the _Tab_ key had been hit, thus taking you to the next _interesting_ message, or scanning ahead to the next incoming folder with _interesting_ messages. _enable-cruise-mode-delete_ This feature modifies the behavior of _Pine_'s _enable-cruise-mode_ feature. Setting this feature causes _Pine_ to implicitly delete read messages when it moves on to display the next _interesting_ message. NOTE: Beware when enabling this feature _and_ the expunge-without-confirm feature. _enable-delivery-status-notification_ If set, this feature enables a subcommand in the composer's "Send?" confirmation prompt. The subcommand allows you to tell _Pine_ to request the type of Delivery Status Notification (DSN) which you would like. Most users will be happy with the default, and need not enable this feature. See the online help for more details. It is not possible to use delivery status notifications if the feature send-without-confirm is set. Note that this is not a method to request _READ_ receipts, which tells the sender when the receiver has read the message. In this case we're talking about notification of delivery to the mailbox, not notification that the message has been seen. _enable-dot-files_ If set, files beginning with dot (".") will be visible in the file browser. For example, you'll be able to select them when using the browser to add an attachment to a message. _enable-dot-folders_ If set, folders beginning with dot (".") may be added and viewed. _enable-exit-via-lessthan-command_ If set, then on screens where there is an _Exit_ command but no _<_ command, the _<_ key will perform the same function as the _Exit_ command. _enable-fast-recent-test_ This feature controls the behavior of the TAB key when traversing folders in the optional Incoming-Folders collection or in optional News-Collections. When the TAB (NextNew) key is pressed, the default behavior is to explicitly examine the status of the folder for the number of recent messages (messages delivered since the last time it was viewed). Depending on the size and number of messages in the folder, this test can be time consuming. Enabling this feature will cause _Pine_ to only test for the existence of any recent messages rather than to obtain the count. This is much faster in many cases. The downside is that you're not given the number of recent messages when prompted to view the next folder. If the feature Tab-Uses-Unseen-For-Next-Folder is turned on, then the present feature will have no effect. _enable-flag-cmd_ Setting this feature enables the _* Flag_ command, which allows you to manipulate the status flags associated with a message. By default, _Flag_ will set the _Important_ flag, which results in an asterisk being displayed in column one of the "Folder Index" for such messages. _enable-flag-screen-implicitly_ This feature modifies the behavior of the _* Flag_ command (provided it too is enabled). By default, when the _* Flag_ command is selected, _Pine_ offers a prompt to set one of several flags and also offers the option of entering the detailed flag manipulation screen via the _^T_ key. Enabling this feature causes _Pine_ to immediately enter the detailed flag screen rather than first offer the simple prompt. The Enable-Flag-Screen-Keyword-Shortcut option offers a slightly different way of setting keywords. _enable-flag-screen-keyword-shortcut_ This feature modifies the behavior of the Flag command (provided it too is enabled). By default, when the "* Flag" command is selected, _Pine_ offers a prompt to set one of several flags and also offers the option of entering the detailed flag manipulation screen via the "^T" key. If you have keywords defined, then enabling this feature adds a shortcut way to set or unset keywords. You use "*" followed by the first letter of a keyword (or the nickname of a keyword if you've given it a nickname) and that will set the keyword. An example is easier to understand than the explanation. The flag command can always be used to set the system flags. For example, to set the Answered flag you would type * A Now suppose you have defined a keyword "Work" using the Keywords option in the Config screen. By default, to set a keyword like "Work" you would usually have to go to the Flag Details screen using the "^T To Flag Details" command. Instead, if you have enabled this feature, you may type * W to set the Work flag, or * ! W to unset it. Just like for the other flag setting commands, the case of the letter does not matter, so "w" or "W" both set the "Work" keyword. Notice that you can only use this trick for one keyword that begins with "W". If you happen to have a "Work" keyword and another keyword that is "WIFI" the "* W" command will set the first one in your list of keywords. Also, there are five letters which are reserved for system flags and the NOT command. If you type "* A" it will always set the Answered flag, not your "Aardvark" keyword. In order to set the "Aardvark" keyword you'll still have to use the Flag Details screen. Because enabling the Enable-Flag-Screen-Implicitly option causes _Pine_ to skip directly to the Flag Details screen when the Flag command is used, setting it will cause this feature to have no effect at all. _enable-full-header-cmd_ This feature enables the _H Full Headers_ command which toggles between the display of all headers in the message and the normal edited view of headers. The _Full Header_ command also controls which headers are included for _Export_, _Pipe_, _Print_, _Forward_, and _Reply_ functions. (For _Reply_, the _Full Header_ mode will respect the _include-headers-in-reply_ feature setting.) If Full Header mode has been turned on and you Forward a message, you will be asked if you'd like to forward the message as an attachment, as opposed to including the text of the message in the body of your new message. If you have also turned on the "Quote Suppression" option then the Full Headers command actually rotates through three states instead of just two. The first is the normal view with long quotes suppressed. The second is the normal view but with the long quotes included. The last enables the display of all headers in the message. When using Export, Pipe, Print, Forward, or Reply the quotes are never suppressed, so the first two states are identical. Normally, the Header Mode will reset to the default behavior when moving to a new message. The mode can be made to persist from message to message by setting the feature Quell-Full-Header-Auto-Reset. _enable-full-header-and-text_ This feature affects how the _H Full Headers_ command displays message text. If set, the raw message text will be displayed. This especially affects MIME formatted email, where the entire MIME format will be displayed. This feature similarly affects how messages are included for the _Export_, _Pipe_, _Print_, _Forward_, and _Reply_ functions. _enable-goto-in-file-browser_ Setting this causes _Pine_ to offer the _G Goto_ command in the file browser. This command allows you to explicitly set the displayed directory. _Pine_'s default behavior requires you to visit each related directory when moving between two distant directories. _enable-incoming-folders_ If set, this feature defines a pseudo-folder collection called _INCOMING MESSAGE FOLDERS_. Initially, the only folder included in this collection will be your _INBOX_, which will no longer show up in your default saved-message folder collection. _enable-jump-shortcut_ Setting this feature will allow you to enter a number (followed by RETURN) and jump to that message number, when in the "Folder Index" or "Message Text" screens. In other words, it obviates the need for typing the _J_ for the _Jump_ command. _enable-lame-list-mode_ This feature modifies the method Pine uses to ask your IMAP server for folder names to display in the the FOLDER LIST screen. It is intended to compensate for a small set of IMAP servers that are programmed to ignore a part of the request, and thus respond to _Pine_'s query with nonsensical results. If you find that _Pine_ is erroneously displaying blank folder lists, try enabling this feature. NOTE: Enabling this feature has consequences for the Goto and Save commands. Many servers allow access to folders outside the area reserved for your personal folders via some reserved character, typically '#' (sharp), '~' (tilde) or '/' (slash). This mechanism allows, at the Goto and Save prompts, quick access to folders outside your personal folder collection without requiring a specific collection definition. This behavior will generally not be available when this feature is enabled. _enable-mail-check-cue_ If set, this will cause an asterisk to appear in the upper left-hand corner of the screen whenever _Pine_ checks for new mail, and two asterisks whenever _Pine_ saves (checkpoints) the state of the current mailbox to disk. _enable-mailcap-param-substitution_ If set, this will allow mailcap named parameter substitution to occur in mailcap entries. By default, this is turned off to prevent security problems which may occur with some incorrect mailcap configurations. For more information, RFC1524 and look for "named parameters" in the text of the RFC. _enable-mouse-in-xterm_ This feature controls whether or not an X terminal mouse can be used with _Pine_. If set, and the $DISPLAY variable indicates that an X terminal is being used, the left mouse button on the mouse can be used to select text or commands. Note: if this feature is set, the behavior of X terminal cut-and-paste is also modified. It is necessary to hold the shift key down while clicking left or middle mouse buttons for the normal xterm cut/paste operations. _enable-msg-view-addresses_ This feature modifies the behavior of _Pine_'s "Message Text" screen. Setting this feature causes _Pine_ to select possible email addresses from the displayed text and display them in boldface for selection. The first available email address is displayed in inverse. This is the "selected" address. Pressing _RETURN_ will cause _Pine_ to enter the message composition screen with the To field filled in with the selected address. Use the up and down arrow keys to change which of the addresses displayed in boldface is the current selection. _enable-msg-view-attachments_ This feature modifies the behavior of _Pine_'s "Message Text" screen. Setting this feature causes _Pine_ to present attachments in boldface. The first available attachment is displayed in inverse. This is the "selected" attachment. Pressing _RETURN_ will cause _Pine_ to display the selected attachment. Use the up and down arrow keys to change which of the attachments displayed in boldface is the current selection. Speaking of arrow keys, the Up and Down Arrows will select the next and previous attachments if one is available on the screen for selection. Otherwise, they will simply adjust the viewed text one line up or down. Similarly, when selectable items are present in a message, the Ctrl-F key can be used to select the next item in the message independent of which portion of the viewed message is currently displayed. The Ctrl-B key can be used to select the previous item in the same way. _enable-msg-view-forced-arrows_ This feature modifies Up and Down arrow key behavior in _Pine_'s "Message Text" screen when selectable Attachments, URL's, or web-hostnames are presented. _Pine_'s usual behavior is to move to the next or previous selectable item if currently displayed or simply to adjust the screen view by one line if the next selectable line is off the screen. Setting this feature causes the Up and Down arrow keys to behave as if no selectable items were present in the message. Note, the _Ctrl-F_ (next selectable item) and _Ctrl-B_ (previous selectable item) functionality is unchanged. _enable-msg-view-urls_ This feature modifies the behavior of _Pine_'s "Message Text" screen. Setting this feature causes _Pine_ to select possible URL's from the displayed text and display them in boldface for selection. The first available URL is displayed in inverse. This is the "selected" URL. Pressing _RETURN_ will cause _Pine_ to display the selected URL via either built-in means as with mailto:, imap:, news:, and nntp:, or via an external application as defined by the url-viewers variable. Use the up and down arrow keys to change which of the URLs displayed in boldface is the current selection. _enable-msg-view-web-hostnames_ This feature modifies the behavior of _Pine_'s "Message Text" screen. Setting this feature causes _Pine_ to select possible web hostnames from the displayed text and display them in boldface for selection. The first available hostname is displayed in inverse. This is the "selected" hostname. Pressing _RETURN_ will cause _Pine_ to display the selected hostname via an external application as defined by the url-viewers variable. Use the up and down arrow keys to change which of the hostnames displayed in boldface is the current selection. _enable-multiple-newsrcs_ This feature makes it so Pine can use multiple newsrcs based on the news server being connected to, which allows for separate lists of subscribed-to newsgroups. When this feature is not set, there is only one list of newsgroups. Under this feature, the name of a newsrc is based on the news server. For example, if your newsrc-path is set to ".newsrc", and the news server you are connecting to is news.example.com, then the newsrc to be used is .newsrc-news.example.com. Setting this feature for the first time will allow for the option of using your old newsrc the next time you read news. If this feature is set, then the feature Mult-Newsrc-Hostnames-As-Typed also may affect the name of the newsrc file that is used. _enable-newmail-in-xterm-icon_ This feature controls whether or not _Pine_ will attempt to announce new mail arrival when it is running in an X terminal window and that window is iconified. If set, and the $DISPLAY variable indicates that an X terminal is being used, _Pine_ will send appropriate escape sequences to the X terminal to modify the label on _Pine_'s icon to indicate that new mail has arrived. _Pine_ will also modify the _Pine_ window's title to indicate new mail. See also Enable-Newmail-Short-Text-in-Icon. _enable-newmail-short-text-in-icon_ This feature controls the text to be displayed in an icon in the event of a new message arrival. Normally, the message will be the one that is displayed on the screen. This feature shortens the message to a count of the number of new messages in brackets. This may be more useful for those who use the window's title bar in the task bar as a new mail indicator. This feature is only useful if the Enable-Newmail-in-Xterm-Icon is also set. Like the Enable-Newmail-in-Xterm-Icon feature, this feature is only relevant when run in an xterm environment. _enable-partial-match-lists_ This feature affects the subcommands available when _Sav_ing or Opening a new folder. If set, the subcommand _^X ListMatches_ will be available. This command allows you to type in a substring of the folder you are looking for and when you type _^X_ it will display all folders which contain that substring in their names. _enable-print-via-y-command_ By default, _Pine_'s print command is available by pressing the _%_ key. In recent versions prior to 4.00, the print command was accessed by pressing the _Y_ key. Enabling this feature will cause _Pine_ to recognize both the old command, _Y_, and the new _%_ method for invoking printing. Note, key menu labels are not changed as a result of enabling this feature. _enable-reply-indent-string-editing_ This feature affects the Reply command's "Include original message in Reply?" prompt. When enabled, it causes the "Edit Indent String" sub-command to appear which allows you to edit the string _Pine_ would otherwise use to denote included text from the message being replied to. Thus, you can change _Pine_'s default message quote character (usually an angle bracket) on a per message basis. So you could change your quoted message to look, for example, like this: On Tues, 26 Jan 1999, John Q. Smith wrote: John: I just wanted to say hello and to congratulate you John: on a job well done! The configuration option "reply-indent-string" may be used to change what appears as the default string to be edited. NOTE: Edited reply-indent-strings only apply to the message currently being replied to. _enable-rules-under-take_ Normally, the Take command takes addresses from a message and helps you put them into your Address Book. If you use Rules for Indexcolors, Roles, Filtering, or Scoring; you may find it useful to be able to Take information from a message's headers and put it into a new Rule. When this feature is set, you will be given an extra prompt which gives you the choice to Take into the Address Book or Take into a rule. _enable-search-and-replace_ If set _Pine_'s composer offers the _R Replace_ command option inside the _W WhereIs_ command. _enable-setlocale-ctype_ This is a hard to understand feature that should only be used in rare cases. Normally, the C function call setlocale(LC_CTYPE, "") is not used by _Pine_ because it causes problems in some cases. If you want to try turning it on, and it is available in your operating system, setting this feature will turn it on. This part of the locale has to do with identifying space characters and alphanumeric characters in your locale. A related feature is disable-setlocale-collate. _enable-sigdashes_ If set and a _signature-file_ exists, the line consisting of the three characters "-- " (dash dash space) is included before the signature. This only happens if the signature doesn't already contain such a line. In addition, when you Reply or Followup to a message containing one of these special lines and choose to include its text, _Pine_ will observe the convention of not including text beyond the special line in your reply. _enable-suspend_ Setting this feature will allow you to type _^Z_ and temporarily suspend _Pine_. Not available on _PC-Pine_. _enable-tab-completion_ This feature enables the _TAB_ key when at a prompt for a filename. In this case, _TAB_ will cause the partial name already entered to be automatically completed, provided the partial name is unambiguous. _enable-take-export_ Normally, the Take command takes addresses from a message and helps you put them into your Address Book. When this feature is set, you will be given an extra prompt which gives you the choice to Take addresses into a file instead of your Address Book. Only the user@domain_name part of the address is put in the file. _enable-tray-icon_ _PC-Pine_ only. This option restores a behavior of previous versions of PC-Pine. These versions, when started, installed a PC-Pine icon in the notification tray of Window's Taskbar. The primary use of this icon was to indicate new mail arrival by turning red (while the Taskbar icon remained green). Additionally, the icon now changes to yellow to signify that a mail folder has been closed unexpectedly. Rather than add another icon to the Taskbar, this version of PC-Pine will color its Taskbar entry's icon red (as well as the icon in the Window Title). This feature is only provided for backwards compatibility. _enable-unix-pipe-cmd_ This feature enables the _| Pipe_ command that sends the current message to the specified Unix command for external processing. Not available on _PC-Pine_. _enable-verbose-smtp-posting_ This feature controls an aspect of _Pine_'s message sending. When enabled, _Pine_ will send a VERB (i.e., VERBose) command early in the posting process intended to cause the server SMTP to provide a more detailed account of the transaction. This feature is typically only useful to system administrators and other support personel as an aid in troublshooting problems. Note, this feature relies on a specific capability of the system's mail transport agent or configured smtp-server. _expanded-view-of-addressbooks_ If multiple address books (either personal or global) are defined, and you wish to have them all expanded implicitly upon entering the ADDRESS BOOK screen, then set this feature. This feature will have no effect unless the feature combined-addrbook-display is also set. _expanded-view-of-distribution-lists_ If this feature is set, then distribution lists in the address book screen will always be expanded automatically. _expanded-view-of-folders_ If multiple folder collections are defined, and you wish to have them all expanded implicitly upon entering the FOLDER LIST screen, then set this feature. This feature will have no effect unless the feature combined-folder-display is also set. _expose-hidden-config_ The purpose of this feature is to allow you to change configuration features and variables which are normally hidden. This is particularly useful if you are using a remote configuration file, where it is difficult to edit the file manually, but it may also be used on a local pinerc configuration file. If set, most configuration variables and features which are normally hidden from view will show up in the Setup/Configuration screen. They will be at the bottom of the configuration screen. You can find them by searching for the word "hidden". Note that this is an advanced feature which should be used with care. The reason that this part of the configuration is normally hidden is because there is a significant potential for causing problems if you change these variables. If something breaks after a change try changing it back to see if that is what is causing the problem. There are also some variables which are normally hidden because they are manipulated through _Pine_ in other ways. For example, the "address-book" variable is normally set using the Setup/AddressBooks screen, so there is little reason to edit it directly. The "incoming-folders" variable is normally changed by using the Add, Delete, and Rename commands in the FOLDER LIST screen, and the "last-time-prune-questioned" variable is normally used internally by _Pine_ and not set directly by the user. _expunge-only-manually_ Normally, when you close a folder which contains deleted messages you are asked if you want to expunge those messages from the folder permanently. If this feature is set, you won't be asked and the deleted messages will remain in the folder. If you choose to set this feature you will have to expunge the messages manually using the eXpunge command, which you can use while in the MESSAGE INDEX screen. If you do not expunge deleted messages the size of your folder will continue to increase until you are out of disk space. _expunge-without-confirm_ If set, you will not be prompted to confirm your intent before the expunge takes place. Actually, you will still be prompted for confirmation if the folder is not the _INBOX_ folder or another folder in the Incoming Folders collection. See the _expunge-without-confirm-everywhere_ feature which follows. _expunge-without-confirm-everywhere_ The regular _expunge-without-confirm_ feature actually only works for the _INBOX_ folder and for other folders in the "Incoming Folders" collection. If this feature is set then you also won't be prompted to confirm expunges for all other folders. _fcc-on-bounce_ If set, normal Fcc (File Carbon Copy) processing will be done for bounced messages, just as if you had composed a message to the address you are bouncing to. If not set, no Fcc of the message will be saved. _fcc-only-without-confirm_ This features controls an aspect of Pine's composer. The only time this feature will be used is if you attempt to send mail which has no recipients but does have an Fcc. Normally, Pine will ask if you really mean to copy the message only to the Fcc. That is, it asks if you really meant to have no recipients. If this feature is set, you will _not_ be prompted to confirm your intent to make only a copy of a message with no recipients. This feature is closely related to warn-if-blank-to-and-cc-and-newsgroups. The difference between this feature and that feature is that this feature considers a Bcc to be a recipient while that feature will ask for confirmation even if there is a Bcc when there is no To, Cc, or Newsgroup. The default values also differ. This feature defaults to asking the question and you have to turn it off. The warn-if-blank-to-and-cc-and-newsgroups feature defaults to not asking unless you turn it on. _fcc-without-attachments_ This features controls the way FCC's (File Carbon Copies) are made of the messages you send. Normally, _Pine_ saves an exact copy of your message as it was sent. When this feature is enabled, the "body" of the message you send (the text you type in the composer) is preserved in the copy as before, however all attachments are replaced with text explaining what had been sent rather than the attachments themselves. This feature also affects _Pine_'s "Send ?" confirmation prompt in that a new "^F Fcc Attchmnts" option becomes available which allows you to interactively set whether or not attachments are saved to the Fcc'd copy. _force-arrow-cursor_ This feature affects _Pine_'s MESSAGE INDEX display routine. If set, the normal inverse-video cursor will be replaced by a simple "arrow" cursor, which normally occupies the second column of the index display. This is the same index cursor you get if you turn on Assume-Slow-Link, but the index line coloring will still be present if this feature is turned on and Assume-Slow-Link is off. An alternative version of the Arrow cursor is available by including the ARROW token in the Index-Format option. It ought to be the case that this feature also affects the ATTACHMENT INDEX, but that is not implemented. _hide-nntp-path_ Normally the Path header that _Pine_ generates when posting to a newsgroup contains the name of the computer from which the message is being sent and the user name. Some believe that this information is used by spammers. If this feature is set, that information will be replaced with the text not-for-mail instead. It should be noted that many servers being connected to will still reveal the information that this feature attempts to protect. _include-attachments-in-reply_ If set, any MIME attachments that were part of the original message will automatically be included in a _Reply_. _include-header-in-reply_ If set, and a message being replied to is included in the _Reply_, then headers from that message will also be part of the reply. _include-text-in-reply_ Normally, _Pine_ will ask whether you wish to include the original message in your _Reply_. If this feature is set and the feature enable-reply-indent-string-editing is _not_ set, then the original message will be included in the reply automatically, without prompting. _ldap-result-to-addrbook-add_ This is only available if _Pine_ was linked with an LDAP library when it was compiled. If both the per-directory-server option use-implicitly-from-composer and this feature are set, then when an implicit directory lookup is done from the composer you will automatically be prompted to add the result of the directory lookup to your address book. _maildrops-preserve-state_ This feature affects the way Mail Drops work. Normally, when mail is moved from a Mail Drop folder to a destination folder, the state changes that have taken place since the mail was originally delivered are lost. Any Seen/New, Answered, Important/Flagged state that has changed will be ignored. All of the mail will be considered unSeen, unAnswered, and unImportant after it is moved. If this feature is set, then the state changes will not be lost. In any case, messages which are already marked Deleted when the mail is to be copied from the Mail Drop will be ignored. _mark-fcc-seen_ This features controls the way FCCs (File Carbon Copies) are made of the messages you send. Normally, when _Pine_ saves a copy of a message you sent as an Fcc, that copy will be marked as Unseen. When you look at the folder it was saved in the message will appear to be a New message until you read it. When this feature is enabled, the message will be marked as having been Seen. _mark-for-cc_ This feature affects Pine's MESSAGE INDEX display. By default, a '+' is displayed in the first column if the message is addressed directly to you. When this feature is set and the message is not addressed to you, then a '-' character is displayed if the message is instead Cc'd directly to you. _mult-newsrc-hostnames-as-typed_ This feature will be of little use to most users. It has no effect unless the feature Enable-Multiple-Newsrcs is set. When the Enable-Multiple-Newsrcs feature is set then the setting of this feature may have an effect on the names of the newsrc files used. Normally, the name of the news server will be canonicalized before it is used in the newsrc file name. For example, if you type the news server name servername it is likely that the canonical name will be something like servername.example.com Or it may be the case that servername.example.com is really an alias (a DNS CNAME) for othername.example.com If this feature is not set, then the canonicalized names will be used. If this feature is set, then the name you typed in (or put in your configuration) will be used. _news-approximates-new-status_ This feature causes certain messages to be marked as _New_ in the "Folder Index" of newsgroups. When opening a newsgroup, _Pine_ will consult your _newsrc_ file and determine the last message you have previously disposed of via the _D_ key. If this feature is set, any subsequent messages will be shown in the Index with an _N_, and the first of these messages will be highlighted. Although this is only an approximation of true _New_ or _Unseen_ status, it provides a useful cue to distinguish more-or-less recent messages from those you have seen previously, but are not yet ready to mark deleted. Background: your _newsrc_ file (used to store message status information for newsgroups) is only capable of storing a single flag, and _Pine_ uses this to record whether or not you are "done with" a message, as indicated by marking the message as _Deleted_. Unfortunately, this means that _Pine_ has no way to record exactly which messages you have previously seen, so it normally does not show the _N_ status flag for any messages in a newsgroup. This feature enables a starting _approximation_ of seen/unseen status that may be useful. _news-deletes-across-groups_ This feature controls what _Pine_ does when you delete a message in a newsgroup that appears in more than one newsgroup. Such a message is sometimes termed a "crossposting" in that it was posted across several newsgroups. _Pine_'s default behavior when you delete such a message is to remove only the copy in the current newsgroup from view when you use the "Exclude" command or the next time you visit the newsgroup. Enabling this feature causes _Pine_ to remove every occurrence of the message from all newsgroups it appears in and to which you are subscribed. NOTE: As currently implemented, enabling this feature may increase the time it takes the Expunge command and newsgroup closing to complete. _news-offers-catchup-on-close_ This feature controls what _Pine_ does as it closes a newsgroup. When set, _Pine_ will offer to delete all messages from the newsgroup as you are quitting _Pine_ or opening a new folder. This feature is useful if you typically read all the interesting messages in a newsgroup each time you open it. This feature saves you from having to delete each message in a newsgroup as you read it or from selecting all the messages and doing an aggregate delete before you move on to the next folder or newsgroup. _news-post-without-validation_ This feature controls whether the NNTP server is queried as newsgroups are entered for posting. Validation over slow links (e.g. dialup using SLIP or PPP) can cause delays. Set this feature to eliminate such delays. _news-read-in-newsrc-order_ This feature controls the order that newsgroups will be presented. If set, they will be presented in the same order as they occur in your _newsrc_ file. If not set, the newsgroups will be presented in alphabetical order. _next-thread-without-confirm_ This feature controls an aspect of _Pine_'s Next and Prev commands in the case where you are using one of the "separate-index-screen" styles for the configuration option threading-index-style and currently have the folder sorted by a Threaded or OrderedSubject sort. When you are Viewing a particular thread you have a MESSAGE INDEX of only the messages in that thread. If you press the Next command with the last message in the thread highlighted you will normally be asked if you want to "View next thread?", assuming there is a next thread to view. If this feature is set it will be assumed that you always want to view the next thread and you won't be asked to confirm that. Similarly, if the first message of the thread is highlighted and you press the Prev command, this feature will prevent the question "View previous thread". This feature only has an effect in the MESSAGE INDEX screen. If you then view a particular message from that screen and press the Next command, you will be sent to the next thread without being asked, independent of the setting of this feature. _offer-expunge-on-inbox_ The INBOX is normally treated differently from regular folders in several ways. One of the differences is that the normal "close" sequence of events is deferred until _Pine_ is exited, instead of happening when you leave the INBOX to view another folder. The "close" sequence normally includes the Expunging of deleted messages (either automatically or after a prompt, controlled by the features Expunge-Without-Confirm, Expunge-Without-Confirm-Everywhere, and Expunge-Only-Manually), and the handling of the Read-Message-Folder. If this feature is set the "close" sequence handling will take place every time you leave the INBOX. The INBOX will still be kept open, but the offer to Expunge and the archiving to the Read-Message-Folder will take place each time you leave the INBOX instead of only once at the end of the session. _offer-expunge-on-stayopen-folders_ This feature is related to the option Stay-Open-Folders. Stay Open folders are treated differently from regular folders in several ways. One of the differences is that the normal "close" sequence of events is deferred until _Pine_ is exited, instead of happening when you leave the folder to view another folder. The "close" sequence normally includes the Expunging of deleted messages (either automatically or after a prompt, controlled by the features Expunge-Without-Confirm, Expunge-Without-Confirm-Everywhere, and Expunge-Only-Manually), and the handling of Incoming-Archive-Folders. If this feature is set the "close" sequence handling will take place when you leave the Stay Open folder. The folder will still be kept open, but the offer to Expunge and the archiving will take place each time you leave the folder instead of only once at the end of the session. This feature does not affect the INBOX, which will still only be processed when you exit _Pine_. _pass-c1-control-characters-as-is_ UNIX _Pine_ only. If the feature pass-control-characters-as-is is set, then this feature has no effect. However, if you wish to filter out regular control characters but pass the so-called C1 control characters (0x80 <= char < 0xA0) through unchanged, then you may leave pass-control-characters-as-is unset and set this feature. This feature is not available in PC-Pine where control characters are never suppressed. _pass-control-characters-as-is_ UNIX _Pine_ only (this feature is automatically on with _PC-Pine_). If set, all characters in a message will be sent to the screen. Normally, control characters are automatically suppressed in order to avoid inadvertently changing terminal setup parameters. Control characters are usually displayed as two character sequences like ^C for Control-C, ^[ for ESCAPE, ^? for DELETE, and ~E for the character with value 133 (0x85). (The DEL character is displayed as ^?, regular control characters are displayed as the character ^ followed by the character obtained by adding the five low-order bits of the character to 0x40, and the C1 control characters 0x80 - 0x9F are displayed as the character ~ followed by the character obtained by adding the five low-order bits of the character to 0x40.) Sometimes, in cases where changing a single control character into a two-character sequence would confuse Pine's display routines, a question mark is substituted for the control character. If you wish to filter out regular control characters but pass the so-called C1 control characters (0x80 <= char < 0xA0) through unchanged, then you may leave this feature unset and set the feature pass-c1-control-characters-as-is instead. This feature is not available in PC-Pine where control characters are never suppressed. _predict-nntp-server_ This feature allows Pine to assume that the open NNTP server at the time of composition is the NNTP server to which the message should be posted. This is especially recommended when there are multiple News collections. If this feature is not set, Pine will try to post to the first server in the nntp-server variable. Setting this feature also negates the need to add News collection servers to the nntp-server variable. This feature can be especially handy when used in conjunction with enable-multiple-newsrcs. _prefer-plain-text_ A message being viewed may contain alternate versions of the same content. Those alternate versions are ordered by the sending software such that the first alternative is the least preferred and the last alternative is the most preferred. Pine will normally display the most-preferred version that it knows how to display. This is most often encountered where the two alternate versions are a plain text version and an HTML version, with the HTML version listed last as the most preferred. If this option is set, then any plain text version will be preferred to all other versions. _preopen-stayopen-folders_ This feature is related to the option Stay-Open-Folders. Normally, Stay Open folders are only opened on demand, when the user asks to open them. From then on they are kept open for the duration of the session. However, if this feature is set, then the Stay Open folders will all be opened at startup, at the same time that the INBOX is opened. _preserve-start-stop-characters_ This feature controls how special control key characters, typically _^S_ and _^Q_, are interpreted when input to _Pine_. These characters are known as the "start" and "stop" characters and are sometimes used in communications paths to control data flow between devices that operate at different speeds. By default, _Pine_ turns the system's handling of these special characters off except during printing. However, if you see _Pine_ reporting input errors such as: [ Command "^Q" not defined for this screen. ] and, at the same time, see your display become garbled, then it is likely that setting this option will solve the problem. Be aware, though, that enabling this feature will also cause _Pine_ to ostensibly "hang" whenever the _Ctrl-S_ key combination is entered as the system is now interpreting such input as a "stop output" command. To "start output" again, simply type _Ctrl-Q_. _print-formfeed-between-messages_ Setting this feature causes a formfeed to be printed between messages when printing multiple messages with the _Apply Print_ command. _print-includes-from-line_ If this feature is set, then the Unix mail style From line is included at the start of each message that is printed. This line looks something like the following, with the address replaced by the address from the From line of the message being printed: From user@domain.somewhere.com Mon May 13 14:11:06 1996 _print-index-enabled_ This feature controls the behavior of the _Print_ command when in the "Folder Index" screen. If set, the _Print_ command will give you a prompt asking if you wish to print the message index, or the currently highlighted message. If not set, the message will be printed. _print-offers-custom-cmd-prompt_ When this feature is set, the _Print_ command will have an additional subcommand called _C CustomPrint_. If selected, you will have the opportunity to enter any system print command, instead of being restricted to using those that have been previously configured in the _Setup/Printer_ screen. _prune-uses-yyyy-mm_ By default, _Pine_ asks monthly whether or not you would like to rename some folders to a new name containing the date. It also asks whether or not you would like to delete some old folders. See the pruning-rule option for an explanation. By default, the name used when renaming a folder looks like -- For example, the first time you run _Pine_ in May of 2004, the folder "sent-mail" might be renamed to sent-mail-apr-2004 If this feature is set, the name used will be of the form -- where "yyyy" is the year and "mm" is the two-digit month (01, 02, ..., 12). For the April, 2004 example above, it would instead be sent-mail-2004-04 because April is the 4th month of the year. A reason you might want to set this feature is so that the folders will sort in chronological order. _quell-attachment-extra-prompt_ By default, when you attempt to view an attachment externally from the "Attachment View" screen, you are asked if you really want to view the selected attachment. If this feature is set, you will _not_ be prompted to confirm your selection. Prior to _Pine_ 4.50, the default behavior was to not prompt. This feature was added for those wanting to preserve that behavior. _quell-berkeley-format-timezone_ POSIX mandates a timezone in UNIX mailbox format folder delimiters (the line which begins with From ). Some versions of Berkeley mail have trouble with this, and don't recognize the line as a message delimiter. If this feature is set, the timezone will be left off the delimiter line. _quell-charset-warning_ By default, if your Character-Set is different from the character set of the message you are viewing, then _Pine_ will add a warning to the start of the displayed text. If this option is set, then that editorial message will be suppressed. Setting this feature also suppresses the comment about the character set in header lines. For example, when viewing a message you might see From: "[ISO-8859-2] Name"
in the From header if your Character-Set is something other than ISO-8859-2. If you set this feature, the comment about the character set will no longer be there. _quell-content-id_ This feature changes the behavior of _Pine_ when sending messages. It is intended to work around a bug in Microsoft's Outlook XP mail user agent. As of this writing, Microsoft has acknowledged the bug but has not added it to the Knowledge Base. We have been told that there will be a post-SP1 hotfix for Outlook XP. This particular bug has bug fix number OfficeQFE:4781. The nature of the bug is that messages with attachments which contain a Content-ID header (which standard _Pine_ attachments do) do not show the attachment indicator (a paperclip) when viewed with Outlook XP. So the user has no indication that the message contains an attachment. If this feature is set then _Pine_ will remove most Content-ID headers before sending a message. If an attachment is of type MESSAGE, then the existing Content-ID headers inside the message will be left intact. This would only happen with _Pine_ if a message was forwarded as an attachment or if a message with a message attached was forwarded. Similarly if an attachment of type MULTIPART/ALTERNATIVE is forwarded, the Content-ID headers of the alternative parts will not be removed. Because the Content-ID header is a standard part of MIME it is possible that setting this feature will break something. For example, if an attachment has a Content-ID header which is necessary for the correct functioning of that attachment, it is possible that _Pine_ may remove that header when the attachment is forwarded. However, it seems fairly safe at this time. _quell-dead-letter-on-cancel_ This feature affects _Pine_'s behavior when you cancel a message being composed. _Pine_'s usual behavior is to write the canceled message to a file named dead.letter in your home directory (under UNIX; DEADLETR under WINDOWS/DOS) overwriting any previous message. Under some conditions (some routine), this can introduce a noticeable delay. Setting this feature will cause _Pine_ NOT to write canceled compositions into the file called dead.letter. This feature affects the newer option Dead-Letter-Files, which specifies the number of dead letter files to keep around. If this feature is set, then the Dead-Letter-Files option has no effect. _quell-empty-directories_ This feature causes _Pine_ to remove from the display any directories that do not contain at least one file or directory. This can be useful to prevent overly cluttered folder lists when a collection is stored on a server that treats all names as both a folder and a directory. Note, enabling this feature can cause surprising behavior! For example, you can still use Add to create a directory, but unless you immediately enter that directory and create a folder, that newly created directory may not be displayed next time you enter the folder list. _quell-extra-post-prompt_ This feature causes _Pine_ to skip the extra question about posting a message which may go to thousands of readers when you are about to post to a newsgroup. _quell-filtering-done-message_ This feature causes _Pine_ to suppress the "filtering done" message. _quell-filtering-messages_ This feature causes _Pine_ to suppress the messages about moving filtered messages and setting flags in messages, due to Filter Rules. _quell-flowed-text_ Beginning with version 4.60, _Pine_ generates flowed text where possible. The method for generating flowed text is defined by RFC 3676, the benefit of doing so is to send message text that can properly be viewed both on normal width displays and on displays with smaller or larger than normal screen widths. With flowed text, a space at the end of a line tells the receiving mail client that the following line belongs to the same paragraph. Quoted text will also be affected, with only the innermost level of ">" quoting being followed by a space. However, if you have changed the "Reply-Indent-String" so that it is not equal to the default value of "> ", then quoted text will not be flowed. For this reason, we recommend that you leave your "Reply-Indent-String" set to the default. This feature turns off the generation of flowed text, as it might be desired to more tightly control how a message is displayed on the receiving end. If this feature is _not_ set, you can control on a message by message basis whether or not flowed text is generated. You do this by typing ^V at the Send confirmation prompt that you get after typing ^X to send a message. ^V is a toggle which turns flowing off and back on if typed again. If for some reason flowing cannot be done on a particular message, then the ^V command will not be available. This would be the case, for example, if this feature was set, or if your "Reply-Indent-String" was set to a non-default value. If the feature Send-Without-Confirm is set, then the opportunity to control on a message by message basis whether or not flowed text is generated is lost. When this feature is not set and you have typed ^V to turn off flowing, the Send confirmation prompt will change to look like Send message (not flowed)? Strip-Whitespace-Before-Send will also turn off the sending of flowed text messages, but it differs in that it also trims all trailing white space from a message before sending it. If alternate editors are used extensively, be aware that a message will still be sent flowed if this feature is unset. In most cases this will be fine, but if the editor has a "flowed text" mode, it would be best to use that. _quell-folder-internal-msg_ This feature determines whether or not _Pine_ will create "pseudo messages" in folders that are in standard Unix or MMDF format. _Pine_ will normally create these pseudo messages when they are not already present in a standard Unix or MMDF folder. Their purpose is to record certain mailbox state data needed for correct IMAP and POP server operation, and also for _Pine_ to be able to mark messages as Answered when the Reply has been postponed. Sites which do not use IMAP/POP for remote mail access, and which need to support mail tools that are adversely affected by the presence of the pseudo-messages (e.g. some mail notification tools) may enable this feature to tell _Pine_ not to create them. Note that _Pine_'s "Answered" flag capability will be adversely affected if this is done. Note too that, even if this feature is enabled, _Pine_ will not remove pseudo-messages when it encounters them (e.g. those created by UW's imapd or ipopd servers.) This feature has no effect on folders that are not in standard Unix or MMDF format, as pseudo-messages are not needed in the other formats to record mailbox state information. _quell-full-header-auto-reset_ The HdrMode Command normally resets to the default state when switching to a new message. For example, if you've used the "H" command to turn on Full Headers for a message you are viewing, and then you type the Next command to look at the next message, the full headers will no longer be shown. Setting this feature disables that reset. Instead, the Header Mode remains the same from message to message. The presence or absence of the HdrMode command is determined by the "Enable-Full-Header-Cmd" Feature-List option. _quell-imap-envelope-update_ In the MESSAGE INDEX screen, if the open folder is being accessed using IMAP, _Pine_ normally tries to paint the index lines on the screen as soon as the information arrives from the IMAP server. This means that the index information makes it onto the screen more quickly than it otherwise would. This sometimes results in behavior that bothers some users. For example, when paging to a new page of the index, it may be possible for the lines to be painted on the screen in a random order, rather than from top to bottom. Setting this feature causes _Pine_ to wait for all of the information to be gathered before it paints the index screen. Once it collects all of the information, the screen will be painted quickly from top to bottom. _quell-lock-failure-warnings_ This feature affects _Pine_'s behavior when it encounters a problem acquiring a mail folder lock. Typically, a secondary file associated with the mail folder being opened is created as part of the locking process. On some systems, such file creation has been administratively precluded by the system configuration. _Pine_ issues a warning when such failures occur, which can become bothersome if the system is configured to disallow such actions. Setting this feature causes _Pine_ to remain silent when this part of lock creation fails. WARNING: systems that have been configured in a way that precludes locking introduce some risk of mail folder corruption when more than one program attempts to modify the mail folder. This is most likely to occur to one's _INBOX_ or other "Incoming Message Folder". _Quell-Mailchecks-Composing-Except-Inbox_ This option is closely related to the Mail-Check-Interval option, the Mail-Check-Interval-Noncurrent option, and Quell-Mailchecks-Composing-Inbox. If this option is set, then the normal new-mail checking which happens while you are composing will not happen for folders other than your INBOX (which depends on the setting of "Quell-Mailchecks-Composing-Inbox"). You might want to set this option if you are experiencing delays while composing which you think might be related to the speed of the new-mail checks. Even with this option turned on, an occasional new-mail check may be done in order to keep the server from killing the connection to the folder. For example, IMAP servers may remove a connection to a folder if there has been no activity on the connection for 30 minutes or more. Instead of letting that happen, _Pine_ will check for new mail before the 30 minutes is up even though you have turned on this feature to quell those checks. Besides new-mail checks, checkpoint operations on the folders will also be quelled when you set this option. The purpose of checkpointing is to write the changes to a folder out to disk periodically in order to avoid losing those changes when system or software problems occur. New-mail checking and checkpointing while you are not composing are not affected by this option. _Quell-Mailchecks-Composing-Inbox_ This option is closely related to the Mail-Check-Interval option, the Mail-Check-Interval-Noncurrent option, and Quell-Mailchecks-Composing-Except-Inbox. If this option is set, then the normal new-mail checking which happens while you are composing will not happen for your INBOX. Checking of other folders is controlled in a similar way with the "Quell-Mailchecks-Composing-Except-Inbox" option. You might want to set this option if you are experiencing delays while composing which you think might be related to the speed of the new-mail checks. Even with this option turned on, an occasional new-mail check may be done in order to keep the server from killing the connection to the folder. For example, IMAP servers may remove a connection to a folder if there has been no activity on the connection for 30 minutes or more. Instead of letting that happen, _Pine_ will check for new mail before the 30 minutes is up even though you have turned on this feature to quell those checks. Besides new-mail checks, checkpoint operations on the INBOX will also be quelled when you set this option. The purpose of checkpointing is to write the changes to a folder out to disk periodically in order to avoid losing those changes when system or software problems occur. New-mail checking and checkpointing while you are not composing are not affected by this option. _quell-maildomain-warning_ When your configuration is set up so that your domain name contains no dots, it is usually a configuration error. By default, _Pine_ will warn you about this when you start it up. You will see a warning message that looks like Incomplete maildomain "". If this feature is set, the warning is turned off. _quell-news-envelope-update_ In the MESSAGE INDEX screen, if the open folder is being accessed using NNTP (News), _Pine_ normally tries to paint the index lines on the screen as soon as the information arrives from the NNTP server. This means that the index information makes it onto the screen more quickly than it otherwise would. This sometimes results in behavior that bothers some users. For example, when paging to a new page of the index, it may be possible for the lines to be painted on the screen in a random order, rather than from top to bottom. Setting this feature causes _Pine_ to wait for all of the information to be gathered before it paints the index screen. Once it collects all of the information, the screen will be painted quickly from top to bottom. _quell-partial-fetching_ Partial fetching is a feature of the IMAP protocol. By default, _Pine_ will use partial fetching when copying the contents of a message or attachment from the IMAP server to _Pine_. This means that the fetch will be done in many small chunks instead of one big chunk. The main benefit of this approach is that the fetch becomes interruptible. That is, the user can type _^C_ to stop the fetch early. In some cases partial fetching may cause a performance problem so that the fetching of data takes significantly longer when partial fetching is used. Turning on this feature will turn off partial fetching. _quell-personal-name-prompt_ _PC-Pine_personal-name. This prompt normally happens before composing a message, and only happens when there is no personal name already set. _quell-user-id-prompt_ _PC-Pine_user-id if the information can be obtained from the login name used to open the INBOX. Normally, this prompt happens before composing a message, and only happens when there is no user-id already set in the configuration. With this feature set, composing a message is only possible after establishing a connection to the INBOX. _quell-ssl-largeblocks_ This feature (_PC-Pine_ only) changes the behavior of fetching messages and attachments so that the message data is fetched in chunks no larger than 12K bytes. This works around a bug in Microsoft's SSL/TLS support. Some versions of Microsoft SSL are not able to read full-sized (16K) SSL/TLS packets. Some servers will send such packets and this will cause _PC-Pine_ to crash with the error incomplete SecBuffer exceeds maximum buffer size Microsoft is aware of the problem and has developed a hotfix for it, but as of this writing the hotfix has not yet been added to the Knowledge Base. _quell-status-message-beeping_ If set status messages will never emit a beep. _quell-timezone-comment-when-sending_ Normally, when _Pine_ generates a Date header for outgoing mail, it will try to include the symbolic timezone at the end of the header inside parentheses. The symbolic timezone is often three characters long, but on some operating systems, it may be longer. Apparently there are some SMTP servers in the world which will reject an incoming message if it has a Date header longer than about 80 characters. If this feature is set, the symbolic timezone normally generated by _Pine_ will not be included. You probably don't need to worry about this feature unless you run into the problem described above. _quell-user-lookup-in-passwd-file_ This feature controls an aspect of _Pine_'s Composer, and if needed, will usually be set by the system manager in _Pine_'s system-wide configuration file. Specifically, if this feature is set, _Pine_ will not attempt to look in the system password file to find a Full Name for the entered address. Normally, names you enter into address fields (e.g. To: or Cc:) are checked against your address book(s) to see if they match an address book nickname. Failing that, (in Unix _Pine_) the name is then checked against the Unix password file. If the entered name matches a username in the system password file, _Pine_ extracts the corresponding Full Name information for that individual, and adds that to the address being entered. However, password file matching can have surprising (incorrect) results if other users of the system do not receive mail at the domain you are using. That is, if either the user-domain or use-only-domain-name option is set such that the administrative domain of other users on the system isn't accurately reflected, _Pine_ should be told that a password file match is coincidental, and Full Name info will be incorrect. For example, a personal name from the password file could get falsely paired with the entered name as it is turned into an address in the configured domain. If you are seeing this behavior, enabling this feature will prevent Unix _Pine_ from looking up names in the password file to find the Full Name for incomplete addresses you enter. _quit-without-confirm_ This feature controls whether or not _Pine_ will ask for confirmation when a _Quit_ command is received. _quote-replace-nonflowed_ This feature, which is only active when Quote-Replace-String is also set, enables quote-replacement on non-flowed messages. It is off by default because a non-flowed message is more dependent on its format, and thus quote-replacement may cause less-than-pleasing results. Setting this feature will cause quote-replacement similar to that of flowed messages, but with the added possibility of long lines being wrapped into new lines if the Quote-Replacement-String is longer than the string it is replacing, which is "> ". _reply-always-uses-reply-to_ If set, _Pine_ will not prompt when a message being replied to contains a _Reply-To:_ header value, but will simply use its value (as opposed to using the _From:_ field's value). _quell-berkeley-format-timezone_ Versions of _Pine_ prior to 4.20 would write Berkeley format message delimiters with a trailing timezone offset. On rare occurances this can cause an incompatibility with other mail access utilities. Enabling this hidden feature will cause _Pine_ to refrain from writing this timezone to the "From " delimiter. _return-to-inbox-without-confirm_ Normally, when you use the TAB command and there are no more folders or newsgroups to visit, you are asked if you want to return to the INBOX. If this feature is set you will not be asked. It will be assumed that you do want to return to the INBOX. _save-aggregates-copy-sequence_ This feature will optimize an aggregate copy operation, if possible, by issuing a single IMAP _COPY_ command with a list of the messages to be copied. This may save network traffic when the source and destination folders are on the same IMAP server. _However, many IMAP servers (including the UW IMAP server) do not preserve the order of messages when this optimization is applied._ If this feature is not enabled, or if the folders are on different IMAP servers, or the folders are local and in different formats, _Pine_ will copy each message individually. _save-partial-msg-without-confirm_ This feature controls an aspect of _Pine_'s Save command. By default, when you Save a message that has some deleted parts, you will be asked to confirm that you want to Save with a prompt that looks like: Saved copy will NOT include entire message! Continue? If this feature is set, you will not be asked. _save-will-advance_ If set, _Save_ will (in addition to copying the current message to the designated folder) also advance to the next message. _save-will-not-delete_ If set, _Save_ will not mark the message Deleted (its default behavior) after it has been copied to the designated folder. _save-will-quote-leading-froms_ This feature controls an aspect of the _Save_ command (and also the way outgoing messages are saved to an FCC folder). If set, _Pine_ will add a leading > character in front of message lines beginning with "From" when they are saved to another folder, including lines syntactically distinguishable from the type of message separator line commonly used on Unix systems. The default behavior is that a > will be prepended only to lines beginning with "From " that might otherwise be confused with a message separator line on Unix systems. If _Pine_ is the only mail program you use, this default is reasonable. If another program you use has trouble displaying a message with an unquoted From saved by _Pine_, you should enable this feature. This feature only applies to the common Unix mailbox format that uses message separator lines beginning with "From ". If _Pine_ has been configured to use a different mailbox format (possibly incompatible with other mail programs), then this issue does not arise, and the feature is irrelevant. _scramble-message-id_ Normally the Message-ID header that _Pine_ generates when sending a message contains the name of the computer from which the message is being sent. Some believe that this hostname could be used by spammers or could be used by others for nefarious purposes. If this feature is set, that name will be transformed with a simple Rot13 transformation. The result will still have the correct syntax for a Message-ID but the part of the MessageID that is often a domain name will not be an actual domain name because the letters will be scrambled. It is possible (but unlikely?) that some spam detection software will use that as a reason to reject the mail as spam. It has also been reported that some spam detection software uses the fact that there are no dots after the "@" as a reason to reject messages. If your _PC-Pine_ Message-ID is using a name without a dot that is because that is what Windows thinks is your "Full computer name". The method used to set this varies from one type of Windows to another but check under Settings -> Control Panel -> System and look for Network Identification or Computer Name or something similar. How to set it is beyond the scope of _Pine_. _select-without-confirm_ This feature controls an aspect of _Pine_'s _Save_, _Export_, and _Goto_ commands. These commands all take text input to specify the name of the folder or file to be used, but allow you to press _^T_ for a list of possible names. If set, the selected name will be used immediately, without further opportunity to confirm or edit the name. _send-without-confirm_ By default, when you send or post a message you will be asked to confirm with a question that looks something like: Send message? If this feature is set, you will _not_ be prompted to confirm your intent to send and your message will be sent. If this feature is set it disables some possibilities and renders some other features meaningless. You will not be able to use Sending Filters, Verbose sending mode, Background Sending, Delivery Status Notifications, or ^V to turn off the generation of flowed text for this message. These options are normally available as suboptions in the Send prompt, but with no Send prompt the options are gone. A somewhat related feature is quell-extra-post-prompt. which may be used to eliminate the extra confirmation question when posting to a newsgroup. _separate-folder-and-directory-display_ This feature affects folder collections wherein a folder and directory can have the same name. By default, _Pine_ displays them only once, denoting that it is both a folder and directory by appending the folder name with the hierarchy character enclosed in square brackets. Enabling this feature will cause _Pine_ to display such names separately marking the name representing a directory with a trailing hierarchy delimiter (typically the slash, "/", character). The feature also alters the command set slightly. By default, the right-arrow descends into the directory, while hitting the Return key will cause the folder by that name to be opened. With this feature set, the Return key will open the highlighted folder, or enter the highlighted directory. _show-cursor_ If set, the system cursor will move to convenient locations in the displays. For example, to the beginning of the status field of the highlighted index line, or to the highlighted word after a successful _WhereIs_ command. It is intended to draw your attention to the _interesting_ spot on the screen. _show-plain-text-internally_ This feature modifies the method Pine uses to display Text/Plain MIME attachments from the Attachment Index screen. Normally, the "View" command searches for any externally defined (usually via the Mailcap file) viewer, and displays the selected text within that viewer. Enabling this feature causes Pine to ignore any external viewer settings and always display text with Pine's internal viewer. _show-selected-in-boldface_ This feature controls an aspect of _Pine_'s aggregate operation commands; in particular, the _Select_ and _WhereIs_ commands. _Select_ and _WhereIs_ (with the _^X_ subcommand) will search the current folder for messages meeting a specified criteria, and _tag_ the resulting messages with an _X_ in the first column of the applicable lines in the "Folder Index". If this feature is set, instead of using the _X_ to denote a selected message, _Pine_ will attempt to display those index lines in boldface. Whether this is preferable to the _X_ will depend on personal taste and the type of terminal being used. _show-sort_ If this feature is set and there is sufficient space on the screen, a short indication of the current sort order will be added in the titlebar (the top line on the screen), before the name of the folder. For example, with the default Arrival sort in effect, the display would have the characters [A] added between the title of the screen and the folder name. The letters are the same as the letters you may type to manually sort a folder with the SortIndex command ($). The letters in the table below are the ones that may show up in the titlebar line. A _A_rrival S _S_ubject F _F_rom T _T_o C _C_c D _D_ate Z si_Z_e O _O_rderedsubject E scor_E_ H t_H_read If the sort order is Reversed, the letter above will be preceded by the letter "R", for example [RS] means that a Reverse Subject sort is in effect. For the case where the sort is in Reverse Arrival order, the "A" is left out, and just an "R" is shown. [R] _signature-at-bottom_ If this feature is set, and a message being _Repl_ied to is being included in the reply, then the contents of the signature file (if any) will be inserted after the included message. This feature does not affect the results of a _Forward_ command. _single-column-folder-list_ If set, the "Folder List" screen will list one folder per line instead of several per line. _slash-collapses-entire-thread_ Normally, the Collapse/Expand Thread command Collapses or Expands the subthread which starts at the currently highlighted message, if any. If this feature is set, then the slash command Collapses or Expands the _entire_ current thread instead of just the subthread. _sort-default-fcc-alpha_ This feature controls an aspect of _Pine_'s FOLDER LIST screen. If set, the default FCC folder will be sorted alphabetically with the other folders instead of appearing right after the INBOX. _sort-default-save-alpha_ This feature controls an aspect of _Pine_'s FOLDER LIST screen. If set, the default save folder will be sorted alphabetically with the other folders instead of appearing right after the INBOX (and default FCC folder). _spell-check-before-sending_ When this feature is set, every composed message will be spell-checked before being sent. _store-window-position-in-config_ Normally, _PC-Pine_ will store its window size and position in the Windows Registry. This is convenient if you want to use the same remote configuration from more than one PC. If you use multiple configuration files to start _PC-Pine_, you may want to store the window size and position in the configuration file instead of in the Registry. Setting this feature causes that to happen. _strip-from-sigdashes-on-reply_ This feature doesn't do anything if the feature enable-sigdashes is turned on. However, if the _enable-sigdashes_ feature is not turned on, then turning on this feature enables support for the convention of not including text beyond the sigdashes line when Replying or Following up to a message and including the text of that message. In other words, this is a way to turn on the signature stripping behavior without also turning on the dashes-adding behavior. _strip-whitespace-before=send_ Starting with Pine 4.60, trailing whitespace is no longer stripped from a message before sending. Trailing whitespace should have no effect on an email message, and in flowed text can aid in delimiting paragraphs. However, the old behavior of stripping trailing whitespace was in place to better deal with older clients that couldn't handle certain types of text encodings. This feature restores the old behavior Trailing whitespace is of aid to flowed-text-formatted messages, which are generated by default but can be turned off via the quell-flowed-text feature. strip-whitespace-before-send also has the effect of turning off sending of flowed text. _tab-checks-recent_ In a FOLDER LIST screen, the TAB key usually just changes which folder is highlighted. If this feature is set, then the TAB key will cause the number of recent messages and the total number of messages in the highlighted folder to be displayed instead. _tab-uses-unseen-for-next-folder_ This feature affects _Pine_'s behavior when using the TAB NextNew Command to move from one folder to the next. _Pine_'s usual behavior is to search for folders with _Recent_ messages in them. Recent messages are messages which have arrived since the last time the folder was opened. Setting this feature causes _Pine_ to search for _Unseen_ messages instead of Recent messages. Unseen messages remain Unseen until you view them (or flag then as Seen with the Flag Command). Setting this feature allows you to locate messages you have not read instead of only recently received messages. When this feature is set, the feature Enable-Fast-Recent-Test will have no effect, so the checking may be slower. Another reason why you might want to use this feature is that _Pine_ sometimes opens folders implicitly behind the scenes, and this clears the Recent status of all messages in the folder. One example where this happens is when Saving or filtering a message to another folder. If that message has some keywords set, then because of some shortcomings in the IMAP specification, the best way to ensure that those keywords are still set in the saved copy of the message is to open the folder and set the keywords explicitly. Because this clears the Recent status of all messages in that folder the folder will not be found by the NextNew command unless this feature is set. _tab-visits-next-new-message-only_ This feature affects _Pine_'s behavior when using the _TAB_ key to move from one message to the next. _Pine_'s usual behavior is to select the next _Unread_ message or message flagged as _Important_. Setting this feature causes _Pine_ to skip the messages flagged as _Important_, and select _Unread_ messages exclusively. Tab behavior when there are no new messages left to select remains unchanged. _termdef-takes-precedence_ In some versions of _Pine_ before 4.00 there was a compile-time macro called _TERMCAP_WINS_ which could be set to cause the _termcap_ or _terminfo_ definitions to be used instead of the built in definitions. Beginning with 4.00 this hidden runtime feature can be turned on to accomplish the same thing. _thread-index-shows-important-color_ This option affects only the THREAD INDEX screen. Whether or not you ever see a THREAD INDEX screen depends on the setting of the configuration option threading-index-style and on the sort order of the index. If a message within a thread is flagged as Important and this option is set, then the entire line in the THREAD INDEX will be colored the color of the Index-important Symbol, which can be set using the Setup Kolor screen. _try-alternative-authentication-driver-first_ This feature affects how _Pine_ connects to IMAP servers. It's utility has largely been overtaken by events, but it may still be useful in some circumstances. If you only connect to modern IMAP servers that support "TLS" you can ignore this feature. Details: By default, _Pine_ will attempt to connect to an IMAP server on the normal IMAP service port (143), and if the server offers "Transport Layer Security" (TLS) and _Pine_ has been compiled with encryption capability, then a secure (encrypted) session will be negotiated. With this feature enabled, before connecting on the normal IMAP port, _Pine_ will first attempt to connect to an alternate IMAP service port (993) used specifically for encrypted IMAP sessions via the Secure Sockets Layer (SSL) method. If the SSL attempt fails, _Pine_ will then try the default behavior described in the previous paragraph. TLS negotiation on the normal port is preferred, and supersedes the use of SSL on port 993, but older servers may not provide TLS support. This feature may be convenient when accessing IMAP servers that do not support TLS, but do support SSL connections on port 993. However, it is important to understand that with this feature enabled, _Pine_ will _attempt_ to make a secure connection if that is possible, but it will proceed to make an insecure connection if that is the only option offered by the server, or if the _Pine_ in question has been built without encryption capability. Note that this feature specifies a per-user (or system-wide) default behavior, but host/folder specification flags may be used to control the behavior of any specific connection. This feature interacts with some of the possible host/folder path specification flags as follows: The /tls host flag, for example, {foo.example.com/tls}INBOX will over-ride this feature for the specified host by bypassing the SSL connection attempt. Moreover, with /tls specified, the connection attempt will fail if the service on port 143 does not offer TLS support. The /ssl host flag, for example, {foo.example.com/ssl}INBOX will insist on an SSL connection for the specified host, and will fail if the SSL service on port 993 is not available. _Pine_ will not subsequently retry a connection on port 143 if /ssl is specified. _unselect-will-not-advance_ Normally, when the Unselect current message command (:) is typed when the current message is selected, the message will be unselected and the next message will become the current message. If this feature is set, the cursor will not advance to the next message. Instead, the current message will remain the current message after unselecting. _use-current-dir_ This feature controls an aspect of several commands. If set, your "current working directory" will be used instead of your home directory for all of the following operations: + _Export_ in the "Folder Index" and "Message Text" screens + Attachment _Save_ in the "Message Text" and "Attachment Text" screens + _^R_ file inclusion in the Composer + _^J_ file attachment in the Composer _use-function-keys_ This feature specifies that _Pine_ will respond to function keys instead of the normal single-letter commands. In this mode, the key menus at the bottom of each screen will show function key designations instead of the normal mnemonic key. _use-regular-startup-rule-for-stayopen-folders_ This feature affects which message is selected as the current message when you enter a Stay Open folder. Normally, the starting position for an incoming folder (which most Stay Open folders will likely be) is controlled by the Incoming-Startup-Rule. However, if a folder is a Stay Open folder, when you re-enter the folder after the first time the current message will be the same as it was when you left the folder. An exception is made if you use the TAB command to get to the folder. In that case, the message number will be incremented by one from what it was when you left the folder. The above special behavior is thought to be useful. However, it is special and different from what you might at first expect. If this feature is set, then Stay Open folders will not be treated specially as far as the startup rule is concerned. _use-sender-not-x-sender_ Normally _Pine_ on Unix adds a header line labeled _X-X-Sender_, if the sender is different from the _From:_ line. The standard specifies that this header line should be labeled _Sender_, not _X-X-Sender_. Setting this feature causes _Sender_ to be used instead of _X-X-Sender_. The standard also states that the data associated with this header field should not be used as a Reply address. Unfortunately, certain implementations of mail list management servers will use the Sender address for such purposes. These implementations often even recognize the _X-Sender_ fields as being equivalent to the _Sender_ field, and use it if present. This is why Pine defaults to _X-X-Sender_. Note, _PC-Pine_ always adds either an _X-X-Sender_ line if there is an open, remote mailbox, or an _X-Warning: UNAuthenticated User_ otherwise _use-subshell-for-suspend_ This feature affects _Pine_'s behavior when process suspension is enabled and then activated via the _^Z_ key. _Pine_ suspension allows one to temporarily interact with the operating system command "shell" without quitting _Pine_, and then subsequently resume the still-active _Pine_ session. When the _enable-suspend_ feature is set and subsequently the _^Z_ key is pressed, _Pine_ will normally suspend itself and return temporary control to _Pine_'s parent shell process. However, if this feature is set, _Pine_ will instead create an inferior subshell process. This is useful when the parent process is not intended to be used interactively. Examples include invoking _Pine_ via the -e argument of the Unix _xterm_ program, or via a menu system. Note that one typically resumes a suspended _Pine_ by entering the Unix _fg_ command, but if this feature is set, it will be necessary to enter the _exit_ command instead. _vertical-folder-list_ This feature controls an aspect of _Pine_'s FOLDER LIST screen. If set, the folders will be listed alphabetically down the columns rather than across the columns as is the default. _warn-if-blank-subject_ This feature affects _Pine_'s behavior when you send a message being composed. If this option is set, _Pine_ will check to see if the message about to be sent has a subject or not. If not, you will be asked if you want to send the message anyway. _warn-if-blank-to-and-cc-and-newsgroups_ This feature affects _Pine_'s behavior when you send a message being composed. If this option is set, _Pine_ will check to see if the message about to be sent has either a To address, a Cc address, or a Newsgroup. If none of these is set, you will be asked if you want to send the message anyway. This feature is closely related to fcc-only-without-confirm. _Pine_ will normally ask if you want to copy a message only to the Fcc. This feature also applies to cases where there is a Bcc but still no To, Cc, or Newsgroup. If the Fcc-Only-Without-Confirm feature is set and you are sending a message with only an Fcc, then you won't be asked about sending with a blank To and Cc and Newsgroups header even if this feature is set. Similarly, if you have already been asked if you want to send to the Fcc only and you have answered Yes, then you won't be asked again about sending with blank To, Cc, and Newsgroups headers even if this feature is set. Hidden Config Variables and Features There are several configuration variables and features which are normally hidden from the user. That is, they don't appear on any of the configuration screens. Some of these are suppressed because they are intended to be used by system administrators, and in fact may only be set in system-wide configuration files. Others are available to users but are thought to be of such little value to most users that their presence on the Config screens would cause more confusion than help. You may set the feature expose-hidden-config to cause most of these hidden variables and features to show up at the bottom of the Setup/Config screen. Hidden Variables Not Settable by Users These variables are settable only in system-wide configuration files. * bugs-additional-data * bugs-address * bugs-fullname * forced-abook-entry * kblock-passwd-count * local-address * local-fullname * mail-directory * standard-printer * suggest-address * suggest-fullname Hidden Variables Which are Settable by Users These variables are not shown to users but are settable by means of hand editing the personal configuration file. This first group is usually maintained by _Pine_ and there will usually be no reason to edit them by hand. * last-version-used * patterns-filters2 * patterns-indexcolors * patterns-roles * patterns-scores2 * remote-abook-metafile This group is usually correct but may be changed by system managers or users in special cases. * disable-setlocale-collate * disable-these-authenticators * disable-these-drivers * enable-setlocale-ctype * last-time-prune-questioned * new-version-threshold * remote-abook-history * remote-abook-validity * rsh-command * rsh-open-timeout * rsh-path * save-aggregates-copy-sequence * sendmail-path * ssh-command * ssh-open-timeout * ssh-path * tcp-open-timeout * tcp-query-timeout * tcp-read-warning-timeout * tcp-write-warning-timeout * use-function-keys System managers are usually interested in setting these in the system-wide configuration files, though users may set them if they wish. * operating-dir * user-input-timeout Hidden Features Which are Settable by Users These are _features_ (as opposed to variables) which users or system administrators may set. Some of them only make sense for administrators. To turn these on manually, the configuration file should be edited and the feature added to the _feature-list_ variable. You may set the feature expose-hidden-config to cause these hidden features to show up in the Setup/Config screen. They will be at the bottom of the screen. * allow-changing-from * disable-busy-alarm * disable-config-cmd * disable-keyboard-lock-cmd * disable-password-caching * disable-password-cmd * disable-pipes-in-sigs * disable-pipes-in-templates * disable-roles-setup-cmd * disable-roles-sig-edit * disable-roles-template-edit * disable-shared-namespaces * disable-signature-edit-cmd * enable-mailcap-param-substitution * quell-berkeley-format-timezone * quell-imap-envelope-update * quell-news-envelope-update * quell-partial-fetching * save-aggregates-copy-sequence * termdef-takes-precedence Retired Variables and Features Variables and features that are no longer used by the current _Pine_ version. When an obsolete variable is encountered, its value is applied to any new corresponding setting. The replaced values include: _compose-mime_ _elm-style-save_ Replaced by _saved-msg-name-rule_ _expanded-view-of-addressbooks_ This one was retired in 4.00 but made a comeback in 4.10. This is now an active feature. _expanded-view-of-folders_ This one was retired in 4.00 but made a comeback in 4.10. This is now an active feature. _feature-level_ Replaced by _feature-list._ _header-in-reply_ Replaced by _include-header-in-reply_ in the _feature-list._ _old-style-reply_ Replaced by _signature-at-bottom_ in the _feature-list._ _use-old-unix-format-write_ No replacement. _patterns_ Replaced by four separate patterns variables: _patterns-roles_, _patterns-filters_, _patterns-scores_, and _patterns-indexcolors_. Since then, _patterns-filters_ has also become obsolete and is replaced by _patterns-filters2_; _patterns-scores_ is replaced by _patterns-scores2_. _save-by-sender_ Replaced by _saved-msg-name-rule._ _show-all-characters_ No replacement, it always works this way now. Tokens for Index and Replying This set of special tokens may be used in the index-format option, in the reply-leadin option, in signature files, in template files used in roles, and in the folder name that is the target of a Filter Rule. Some of them aren't available in all situations. The tokens are used as they appear below for the _Index-Format_ option, but they must be surrounded by underscores for the _Reply-Leadin_ option, in signature and template files, and in the target of Filter Rules. _Tokens Available for all Cases (except Filter Rules)_ SUBJECT This token represents the Subject the sender gave the message. FROM This token represents the personal name (or email address if the name is unavailable) of the person specified in the message's "From:" header field. ADDRESS This is similar to the "FROM" token, only it is always the email address, never the personal name. For example, "mailbox@domain". MAILBOX This is the same as the "ADDRESS" except that the domain part of the address is left off. For example, "mailbox". SENDER This token represents the personal name (or email address) of the person listed in the message's "Sender:" header field. TO This token represents the personal names (or email addresses if the names are unavailable) of the persons specified in the message's "To:" header field. NEWSANDTO This token represents the newsgroups from the message's "Newsgroups:" header field _and_ the personal names (or email addresses if the names are unavailable) of the persons specified in the message's "To:" header field. TOANDNEWS Same as "NEWSANDTO" except in the opposite order. NEWS This token represents the newsgroups from the message's "Newsgroups:" header field. CC This token represents the personal names (or email addresses if the names are unavailable) of the persons specified in the message's "Cc:" header field. RECIPS This token represents the personal names (or email addresses if the names are unavailable) of the persons specified in both the message's "To:" header field and the message's "Cc:" header field. NEWSANDRECIPS This token represents the newsgroups from the message's "Newsgroups:" header field _and_ the personal names (or email addresses if the names are unavailable) of the persons specified in the message's "To:" and "Cc:" header fields. RECIPSANDNEWS Same as "NEWSANDRECIPS" except in the opposite order. INIT This token represents the initials from the personal name of the person specified in the message's "From:" header field. If there is no personal name, it is blank. DATE This token represents the date on which the message was sent, according to the "Date" header field. It has the format MMM DD. For example, "Oct 23". SMARTDATE This token represents the date on which the message was sent, according to the "Date" header field. It is "Today" if the message was sent today, "Yesterday" for yesterday, "Wednesday" if it was last Wednesday, and so on. If the message is from more than six months ago it includes the year, as well. There is no adjustment made for different time zones, so you'll get the day the message was sent according to the time zone the sender was in. SMARTTIME This token represents the most relevant elements of the date on which the message was sent (according to the "Date" header field), in a compact form. If the message was sent today, only the time is used (e.g. "9:22am", "10:07pm"); if it was sent during the past week, the day of the week and the hour are used (e.g. "Wed09am", "Thu10pm"); other dates are given as date, month, and year (e.g. "23Aug00", "9Apr98"). There is no adjustment made for different time zones, so you'll get the day/time the message was sent according to the time zone the sender was in. SMARTDATETIME This is a combination of SMARTDATE and SMARTTIME. It is SMARTDATE unless the SMARTDATE value is "Today", in which case it is SMARTTIME. DATEISO This token represents the date on which the message was sent, according to the "Date" header field. It has the format YYYY-MM-DD. For example, "1998-10-23". SHORTDATEISO This token represents the date on which the message was sent, according to the "Date" header field. It has the format YY-MM-DD. For example, "98-10-23". SHORTDATE1 This token represents the date on which the message was sent, according to the "Date" header field. It has the format MM/DD/YY. For example, "10/23/98". SHORTDATE2 This token represents the date on which the message was sent, according to the "Date" header field. It has the format DD/MM/YY. For example, "23/10/98". SHORTDATE3 This token represents the date on which the message was sent, according to the "Date" header field. It has the format DD.MM.YY. For example, "23.10.98". SHORTDATE4 This token represents the date on which the message was sent, according to the "Date" header field. It has the format YY.MM.DD. For example, "98.10.23". LONGDATE This token represents the date on which the message was sent, according to the "Date" header field. It has the format MMM DD, YYYY. For example, "Oct 23, 1998". DAYDATE This token represents the date on which the message was sent, according to the "Date" header field. It looks like "Sat, 23 Oct 1998". DAY This token represents the day of the month on which the message was sent, according to the "Date" header field. For example, "23" or "9". DAY2DIGIT This token represents the day of the month on which the message was sent, according to the "Date" header field. For example, "23" or "09". It is always 2 digits. DAYORDINAL This token represents the ordinal number which is the day of the month on which the message was sent, according to the "Date" header field. For example, "23rd" or "9th". DAYOFWEEK This token represents the day of the week on which the message was sent, according to the "Date" header field. For example, "Sunday" or "Wednesday". DAYOFWEEKABBREV This token represents the day of the week on which the message was sent, according to the "Date" header field. For example, "Sun" or "Wed". MONTHABBREV This token represents the month the message was sent, according to the "Date" header field. For example, "Oct". MONTHLONG This token represents the month in which the message was sent, according to the "Date" header field. For example, "October". MONTH This token represents the month in which the message was sent, according to the "Date" header field. For example, "10" or "9". MONTH2DIGIT This token represents the month in which the message was sent, according to the "Date" header field. For example, "10" or "09". It is always 2 digits. YEAR This token represents the year the message was sent, according to the "Date" header field. For example, "1998" or "2001". YEAR2DIGIT This token represents the year the message was sent, according to the "Date" header field. For example, "98" or "01". It is always 2 digits. TIME24 This token represents the time at which the message was sent, according to the "Date" header field. There is no adjustment made for different time zones, so you'll get the time the message was sent according to the time zone the sender was in. It has the format HH:MM. For example, "17:28". TIME12 This token represents the time at which the message was sent, according to the "Date" header field. This time is for a 12 hour clock. It has the format HH:MMpm. For example, "5:28pm" or "11:13am". TIMEZONE This token represents the numeric timezone from the "Date" header field. It has the format [+-]HHMM. For example, "-0800". _Tokens Available Only for Index-Format_ MSGNO This token represents the message's current position in the folder which, of course, may change as the folder is sorted or new mail arrives. STATUS This token represents a three character wide field displaying various aspects of the message's state. The first character is either blank, a '*' for message marked Important, or a '+' indicating a message addressed directly to you (as opposed to your having received it via a mailing list, for example). When the feature mark-for-cc is set, if the first character would have been blank then it will instead be a '-' if the message is cc'd to you. The second character is typically blank, though the arrow cursor may occupy it if either the assume-slow-link or the force-arrow-cursor feature is set (or you actually are on a slow link). The third character is either the letter 'D' if the message is deleted, 'A' if it is answered (but not deleted), or 'N' if it is new (but not deleted or answered), or blank if it is neither deleted, answered nor new. If you are using a threaded view of the index and this message is at the top of a collapsed portion of a thread, then this token refers to all of the messages in the collapsed portion of the thread instead of just the top message. The first character will be a '*' if _any_ of the messages in the thread are marked Important, else a '+' if any of the messages are addressed to you, else a '-' if any of the messages are cc'd to you. The third character will be a 'D' if _all_ of the messages in the collapsed thread are marked deleted, else it will be 'N' if any of the messages are undeleted and unseen, and it will be blank otherwise. FULLSTATUS This token represents a less abbreviated alternative to the "STATUS" token. It is six characters wide. The first character is '+', '-', or blank, the second blank, the third either '*' or blank, the fourth 'N' or blank, the fifth 'A' or blank, and the sixth character is either 'D' or blank. If you are using a threaded view of the index and this message is at the top of a collapsed portion of a thread, then this token refers to all of the messages in the collapsed portion of the thread instead of just the top message. The first character is '+', '-', or blank depending on whether _any_ of the messages in the collapsed thread are addressed to you or cc'd to you. The third character will be '*' if any of the messages are marked Important. The fourth character will be 'N' if all of the messages in the thread are New, else 'n' if some of the messages in the thread are New, else blank. The fifth character will be 'A' or 'a' or blank, and the sixth character will be 'D' or 'd' or blank. IMAPSTATUS This token represents an even less abbreviated alternative to the "STATUS" token. It differs from "FULLSTATUS" in only the fourth character which is an 'N' if the message is new to this folder since the last time it was opened _and_ it has not been viewed, an 'R' (Recent) if the message is new to the folder and has been viewed, a 'U' (Unseen) if the message is not new to the folder since it was last opened _but_ has not been viewed, or a blank if the message has been in the folder since it was last opened and has been viewed. If you are using a threaded view of the index and this message is at the top of a collapsed portion of a thread, then the fourth character will be 'N' if all of the messages in the thread are unseen and recent; else 'n' if some of the messages in the thread are unseen and recent; else 'U' if all of the messages in the thread are unseen and not recent; else 'u' if some of the messages in the thread are unseen and not recent; else 'R' if all of the messages in the thread are seen and recent; else 'r' if some of the messages in the thread are seen and recent; else blank. SIZE This token represents the total size, in bytes, of the message. If a "K" (Kilobyte) follows the number, the size is approximately 1,000 times that many bytes (rounded to the nearest 1,000). If an "M" (Megabyte) follows the number, the size is approximately 1,000,000 times that many bytes. Commas are not used in this field. This field is seven characters wide, including the enclosing parentheses. Sizes are rounded when "K" or "M" is present. The progression of sizes used looks like: 0 1 ... 9999 10K ... 999K 1.0M ... 99.9M 100M ... 2000M SIZECOMMA This token represents the total size, in bytes, of the message. If a "K" (Kilobyte) follows the number, the size is approximately 1,000 times that many bytes (rounded to the nearest 1,000). If an "M" (Megabyte) follows the number, the size is approximately 1,000,000 times that many bytes. Commas are used if the number shown is 1,000 or greater. The SIZECOMMA field is one character wider than the SIZE field. Sizes are rounded when "K" or "M" is present. The progression of sizes used looks like: 0 1 ... 99,999 100K ... 9,999K 10.0M ... 999.9M 1,000M ... 2,000M KSIZE This token represents the total size of the message, expressed in kilobytes or megabytes, as most appropriate. These are 1,024 byte kilobytes and 1,024 x 1,024 byte megabytes. The progression of sizes used looks like: 0K 1K ... 1023K 1.0M ... 99.9M 100M ... 2047M SIZENARROW This token represents the total size, in bytes, of the message. If a "K" (Kilobyte) follows the number, the size is approximately 1,000 times that many bytes. If an "M" (Megabyte) follows the number, the size is approximately 1,000,000 times that many bytes. If a "G" (Gigabyte) follows the number, the size is approximately 1,000,000,000 times that many bytes. This field uses only five characters of screen width, including the enclosing parentheses. The progression of sizes used looks like: 0 1 ... 999 1K ... 99K .1M ... .9M 1M ... 99M .1G ... .9G 1G 2G DESCRIPSIZE This token is intended to represent a more useful description of the message than just its size, but it isn't very useful at this point. The plus sign in this view means there are attachments. Note that including this token in the "Index-Format" could slow down the display a little while _Pine_ collects the necessary information. SUBJKEY This token is the same as the SUBJECT token unless keywords are set for the message. In that case, a list of keywords enclosed in braces will be prepended to the subject of the message. Having this set in the index-format will also cause the keywords to be prepended to the subject in the MESSAGE VIEW screen. If you have given a keyword a nickname (Keywords), that nickname is displayed instead of the actual keyword. The Keyword-Surrounding-Chars option may be used to modify this token slightly. It is also possible to color keywords in the index using the Setup/Kolor screen (Keyword Colors). SUBJKEYINIT This token is the same as the SUBJKEY token except that instead of prepending a list of keywords to the subject, a list of first initials of keywords will be prepended instead. For example, if a message has the keywords _Work_ and _Now_ set (or Work and Now are the Pine nicknames of keywords which are set) then the SUBJKEY token would cause a result like {Work Now} actual subject whereas the SUBJKEYINIT token would give {WN} actual subject The Keyword-Surrounding-Chars option may be used to modify this token slightly. It is also possible to color keywords in the index using the Setup/Kolor screen (Keyword Colors). KEY This is a space-delimited list of keywords that are set for the message. If you have given a keyword a nickname (Keywords), that nickname is displayed instead of the actual keyword. It is also possible to color keywords in the index using the Setup/Kolor screen (Keyword Colors). KEYINIT This is a list of keyword initials that are set for the message. If you have given a keyword a nickname (Keywords), the initial of that nickname is displayed instead of the initial of the actual keyword. It is also possible to color keyword initials in the index using the Setup/Kolor screen (Keyword Colors). ATT This is a one column wide field which represents the number of attachments a message has. It will be blank if there are no attachments, a single digit for one to nine attachments, or an asterisk for more than nine. Note that including this token in the "Index-Format" could slow down the display a little while _Pine_ collects the necessary information. FROMORTO This token represents _either_ the personal name (or email address) of the person listed in the message's "From:" header field, _or_, if that address is yours or one of your alternate addresses, the first person specified in the message's "To:" header field with the prefix "To: " prepended. If the from address is yours and there is also no "To" address, _Pine_ will use the address on the "Cc" line. If there is no address there, either, _Pine_ will look for a newsgroup name from the "Newsgroups" header field and put that after the "To: " prefix. FROMORTONOTNEWS This is almost the same as _FROMORTO_. The difference is that newsgroups aren't considered. When a message is from you, doesn't have a To or Cc, and does have a Newsgroups header; this token will be your name instead of the name of the newsgroup (like it would be with FROMORTO). ARROW This gives an alternative way to display the current message in the MESSAGE INDEX screen. Usually the current message is indicated by the line being shown in reverse video. Instead, if the ARROW token is included in your Index-Format, the current line will include an "arrow" that looks like -> in the ARROW token's field. For all of the non-current messages, the ARROW field will be filled with blanks. If you use the fixed-field width feature the length of the "arrow" may be adjusted. The arrow will be drawn as width-1 dashes followed by a greater than sign. For example, if you use ARROW(3) you will get --> and ARROW(1) will give you just > It is also possible to set the color of the ARROW field. By default (and for non-current messages) the arrow is colored the same as the index line it is part of. You may set it to be another color with the "Index Arrow Color" option available from the Setup Kolor screen. SCORE This gives the score of each message. This will be six columns wide to accomodate the widest possible score. You will probably want to use the index-format fixed-field width feature to limit the width of the field to the widest score that you use (e.g. SCORE(3) if your scores are always between 0 and 999). If you have not defined any score rules the scores will all be zero. If any of your score rules contain AllText or BodyText patterns then including SCORE in the index-format may slow down the display of the MESSAGE INDEX screen. _Tokens Available for all but Index-Format_ CURNEWS This token represents the current newsgroup if there is one. For example, "comp.mail.pine". MSGID This token represents the message ID of the message. CURDATE This token represents the current date. It has the format MMM DD. For example, "Oct 23". CURDATEISO This token represents the current date. It has the format YYYY-MM-DD. For example, "1998-10-23". CURDATEISOS This token represents the current date. It has the format YY-MM-DD. For example, "98-10-23". CURTIME24 This token represents the current time. It has the format HH:MM. For example, "17:28". CURTIME12 This token represents the current time. This time is for a 12 hour clock. It has the format HH:MMpm. For example, "5:28pm" or "11:13am". CURDAY This token represents the current day of the month. For example, "23" or "9". CURDAY2DIGIT This token represents the current day of the month. For example, "23" or "09". It is always 2 digits. CURDAYOFWEEK This token represents the current day of the week. For example, "Sunday" or "Wednesday". CURDAYOFWEEKABBREV This token represents the current day of the week. For example, "Sun" or "Wed". CURMONTH This token represents the current month. For example, "10" or "9". CURMONTH2DIGIT This token represents the current month. For example, "10" or "09". It is always 2 digits. CURMONTHLONG This token represents the current month. For example, "October". CURMONTHABBREV This token represents the current month. For example, "Oct". CURYEAR This token represents the current year. For example, "1998" or "2001". CURYEAR2DIGIT This token represents the current year. For example, "98" or "01". It is always 2 digits. LASTMONTH This token represents last month. For example, if this is November (the 11th month), it is equal to "10" or if this is October (the 10th month), it is "9". It is possible that this and the other tokens beginning with LASTMONTH below could be useful when used with a Filtering Rule that has the "Beginning of Month" option set. LASTMONTH2DIGIT This token represents last month. For example, if this is November (the 11th month), it is equal to "10" or if this is October (the 10th month), it is "09". It is always 2 digits. LASTMONTHLONG This token represents last month. For example, if this is November the value is "October". LASTMONTHABBREV This token represents last month. For example, if this is November the value is "Oct". LASTMONTHYEAR This token represents what the year was a month ago. For example, if this is October, 1998, it is "1998". If this is January, 1998, it is "1997". LASTMONTHYEAR2DIGIT This token represents what the year was a month ago. For example, if this is October, 1998, it is "98". If this is January, 1998, it is "97". LASTYEAR This token represents last year. For example, if this is 1998, it equals "1997". It is possible that this could be useful when used with a Filtering Rule that has the "Beginning of Year" option set. LASTYEAR2DIGIT This token represents last year. For example, if this is 1998, it equals "97". It is always 2 digits. ROLENICK This token represents the nickname of the role currently being used. If no role is being used, then no text will be printed for this token. This token does not work with Filter Rule folder names. _Token Available Only for Templates and Signatures_ CURSORPOS This token is different from the others. When it is replaced it is replaced with nothing, but it sets a _Pine_ internal variable which tells the composer to start with the cursor positioned at the position where this token was. If both the template file and the signature file contain a "CURSORPOS" token, then the position in the template file is used. If there is a template file and neither it nor the signature file contains a "CURSORPOS" token, then the cursor is positioned after the end of the contents of the template file when the composer starts up. Conditional Inclusion of Text for Reply-Leadin, Signatures, and Templates Conditional text inclusion may be used with the Reply-Leadin option, in signature files, and in template files used in roles. It may _not_ be used with the _Index-Format_ option. There is a limited if-else capability for including text. The if-else condition is based on whether or not a given token would result in replacement text you specify. The syntax of this conditional inclusion is _token_(match_this, if_matched [ , if_not_matched ] ) The left parenthesis must follow the underscore immediately, with no intervening space. It means the token is expanded and the results of that expansion are compared against the "match_this" argument. If there is an exact match, then the "if_matched" text is used as the replacement text. Otherwise, the "if_not_matched" text is used. One of the most useful values for the "match_this" argument is the empty string, "". In that case the expansion is compared against the empty string. Here's an example to make it clearer. This text could be included in one of your template files: _NEWS_("", "I'm replying to email","I'm replying to news") If that is included in a template file which you are using while replying to a message (because you chose to use the role it was part of), and that message has a newsgroup header and a newsgroup in that header, then the text I'm replying to news will be included in the message you are about to compose. On the other hand, if the message you are replying to does not have a newsgroup, then the text I'm replying to email would be included instead. This would also work in signature files and in the "Reply-Leadin" option. If the "match_this", "if_matched", or "if_not_matched" arguments contain spaces, parentheses, or commas; they have to be quoted with double quotation marks (like in the example above). If you want to include a literal quote in the text you must escape the quote by preceding it with a backslash character. If you want to include a literal backslash character you must escape it by preceding it with another backslash. The comma followed by "if_not_matched" is optional. If there is no "if_not_matched" present then no text is included if the not_matched case is true. Here's another example: _NEWS_("", "", "This msg was seen in group: _NEWS_.") Here you can see that tokens may appear in the arguments. The same is true for tokens with the conditional parentheses. They may appear in arguments, though you do have to be careful to get the quoting and escaping of nested double quotes correct. If this was in the signature file being used and you were replying to a message sent to comp.mail.pine the resulting text would be: This msg was seen in group: comp.mail.pine. If you were replying to a message which wasn't sent to any newsgroup the resulting text would be a single blank line. The reason you'd get a blank line is because the end of the line is outside of the conditional, so is always included. If you wanted to get rid of that blank line you could do so by moving the end of line inside the conditional. In other words, it's ok to have multi-line "if_matched" or "if_not_matched" arguments. The text just continues until the next double quotation, even if it's not on the same line. Here's one more (contrived) example illustrating a matching argument which is not the empty string. _SMARTDATE_("Today", _SMARTDATE_, "On _DATE_") _FROM_ wrote: If this was the value of your "Reply-Leadin" option and you were replying to a message which was sent today, then the value of the "Reply-Leadin" would be Today Fred Flintstone wrote: But if you were replying to a message sent on Oct. 27 (and that wasn't today) you would get On Oct 27 Fred Flintstone wrote: Per Server Directory Configuration This is only available if _Pine_ was linked with an LDAP library when it was compiled. If that's the case, there will be a Directory option underneath the Setup command on the Main Menu. Each server that is defined there has several configuration variables which control the behavior when using it. _ldap-server_ This is the name of the host where an LDAP server is running. To find out whether your organization has its own LDAP server, contact its computing support staff. _search-base_ This is the search base to be used on this server. It functions as a filter by restricting your searches in the LDAP server database to the specified contents of the specified fields. Without it, searches submitted to this directory server may fail. It might be something like: O = , C = US or it might be blank. (Some LDAP servers actually ignore anything specified here.) If in doubt what parameters you should specify here, contact the maintainers of the LDAP server. _port_ This is the TCP port number to be used with this LDAP server. If you leave this blank port 389 will be used. _nickname_ This is a nickname to be used in displays. If you don't supply a nickname the server name from "ldap-server" will be used instead. This option is strictly for your convenience. _use-implicitly-from-composer_ Set this feature to have lookups done to this server implicitly from the composer. If an address doesn't look like a fully-qualified address, it will be looked up in your address books, and if it doesn't match a nickname there, then it will be looked up on the LDAP servers which have this feature set. Also see the LDAP feature lookup-addrbook-contents and the Setup/Config feature ldap-result-to-addrbook-add. _lookup-addrbook-contents_ Normally implicit LDAP lookups from the composer are done only for the strings you type in from the composer screen. In other words, you type in something in the To or CC field and press return, then the string is looked up. First that string is looked up in your address books. If a match is found there, then the results of that match are looked up again. If you place a string in your address book that you want to have looked up on the LDAP directory server, you need to turn on this feature. If you set this feature for a server, you almost always will also want to set the use-implicitly-from-composer feature. An example might serve to best illustrate this feature. If an LDAP lookup of "William Clinton" normally returns an entry with an address of pres@whitehouse.gov, then you might put an entry in your address book that looks like: Nickname Address bill "William Clinton" Now, when you type "bill" into an address field in the composer _Pine_ will find the "bill" entry in your address book. It will replace "bill" with "William Clinton". It will then search for an entry with that nickname in your address book and not find one. If this feature is set, _Pine_ will then attempt to lookup "William Clinton" on the LDAP server and find the entry with address pres@whitehouse.gov. A better way to accomplish the same thing is probably to use the feature save-search-criteria-not-result. _save-search-criteria-not-result_ Normally when you save the results of an LDAP directory lookup to your address book the _results_ of the lookup are saved. If this feature is set and the entry being saved was found on this directory server, then the search _criteria_ is saved instead of the _results_ of the search. When this address book entry is used in the future, instead of copying the results from the address book the directory lookup will be done again. This could be useful if the copied result might become stale because the data on the directory server changes (for example, the entry's email address changes). You probably don't want to set this feature if the server is at all slow or unreliable. The way this actually works is that instead of saving the email address in your address book, _Pine_ saves enough information to look up the same directory entry again. In particular, it saves the server name and the distinguished name of the entry. It's possible that the server administrators might change the format of distinguished names on the server, or that the entry might be removed from the server. If _Pine_ notices this, you will be warned and a backup copy of the email address will be used. You may want to create a new entry in this case, since you will get the annoying warning every time you use the old entry. You may do that by Saving the entry to a new nickname in the same address book. You will be asked whether or not you want to use the backup email address. A related feature in the Setup/Config screen is ldap-result-to-addrbook-add. _disable-ad-hoc-space-substitution_ Spaces in your input are normally handled specially. Each space character is replaced by * in the search query (but not by "* *"). The reason this is done is so the input string Greg Donald (which is converted to "Greg* Donald") will match the names "Greg Donald", "Gregory Donald", "Greg F. Donald", and "Gregory F Donald"; but it won't match "Greg McDonald". If the "Search-Rule" you were using was "begins-with", then it would also match the name "Greg Donaldson". Turning on this feature will disable this substitution. _allow-ldap-v3_ _Pine_ normally attempts to use version 2 of the LDAP protocol. When the version 3 protocol is used the server will output the results in the UTF-8 character set. Since _Pine_ is not currently able to handle this UTF-8 output, it does not use version 3 protocol. However, there are some servers which do not support version 2 of the protocol and only support version 3. Some people have found that even though _Pine_ does not handle everything correctly, the results are still usually usable and may be better than nothing. Turning on this feature will cause _Pine_ to attempt to talk version 3 LDAP protocol to this server. _search-type_ This affects the way that LDAP searches are done. In particular, this tells the server where to look for the string to be matched. If set to "name" then the string that is being searched for will be compared with the string in the "Name" field on the server (technically, it is the "commonname" field on the server). "Surname" means we're looking for a match in the "Surname" field on the server (actually the "sn" field). "Givenname" really is "givenname" and "email" is the electronic mail address (this is actually the field called "mail" or "electronicmail" on the server). The other three types are combinations of the types listed so far. "Name-or-email" means the string should appear in either the "name" field OR the "email" field. Likewise, "surname-or-givenname" means "surname" OR "givenname" and "sur-or-given-or-name-or-email" means the obvious thing. This search _type_ is combined with the search rule to form the actual search query. The usual default value for this option is "sur-or-given-or-name-or-email". This type of search may be slow on some servers. Try "name-or-email", which is often faster, or just "name" if the performance seems to be a problem. Some servers have been configured with different attribute names for these four fields. In other words, instead of using the attribute name "mail" for the email address field, the server might be configured to use something else, for example, "rfc822mail" or "internetemailaddress". _Pine_ can be configured to use these different attribute names by using the four per-server configuration options: + email-attribute + name-attribute + surname-attribute + givenname-attribute _search-rule_ This affects the way that LDAP searches are done. If set to "equals" then only exact matches count. "Contains" means that the string you type in is a substring of what you are matching against. "Begins-with" and "ends-with" mean that the string starts or ends with the string you type in. Spaces in your input are normally handled specially, but you can turn that special handling off with the disable-ad-hoc-space-substitution feature. The usual default value for this option is _begins-with_. _email-attribute_ This is the name of the attribute which is searched for when looking for an email address. The default value for this option is "mail" or "electronicmail". If the server you are using uses a different attribute name for the email address, put that attribute name here. This will affect the search filter used if your Search-Type is one that contains a search for "email". It will also cause the attribute value matching this attribute name to be used as the email address when you look up an entry from the composer. _name-attribute_ This is the name of the attribute which is searched for when looking for the name of the entry. The default value for this option is "cn", which stands for common name. If the server you are using uses a different attribute name for the name, put that attribute name here. This will affect the search filter used if your Search-Type is one that contains a search for "name". _surname-attribute_ This is the name of the attribute which is searched for when looking for the surname of the entry. The default value for this option is "sn". If the server you are using uses a different attribute name for the surname, put that attribute name here. This will affect the search filter used if your Search-Type is one that contains a search for "surname". _givenname-attribute_ This is the name of the attribute which is searched for when looking for the given name of the entry. The default value for this option is "givenname". If the server you are using uses a different attribute name for the given name, put that attribute name here. This will affect the search filter used if your Search-Type is one that contains a search for "givenname". _timelimit_ This places a limit on the number of seconds the LDAP search will continue. The default is 30 seconds. A value of 0 means no limit. Note that some servers may place limits of their own on searches. _sizelimit_ This places a limit on the number of entries returned by the LDAP server. A value of 0 means no limit. The default is 0. Note that some servers may place limits of their own on searches. _custom-search-filter_ This one is for advanced users only! If you define this, then the search-type and search-rule defined are both ignored. However, the feature disable-ad-hoc-space-substitution is still in effect. That is, the space substitution will take place even in a custom filter unless you disable it. If your LDAP service stops working and you suspect it might be because of your custom filter, just delete this filter and try using the _search-type_ and _search-rule_ instead. Another option that sometimes causes trouble is the search-base option. This variable may be set to the string representation of an LDAP search filter (see RFC1960). In the places where you want the address string to be substituted in, put a '%s' in this filter string. Here are some examples: A "Search-Type" of "name" with "Search-Rule" of "begins-with" is equivalent to the "custom-search-filter" (cn=%s*) When you try to match against the string "string" the program replaces the "%s" with "string" (without the quotes). You may have multiple "%s"'s and they will all be replaced with the string. There is a limit of 10 "%s"'s. A "Search-Type" of "name-or-email" with "Search-Rule" of "contains" is equivalent to (|(cn=*%s*)(mail=*%s*)) If your server uses a different attribute _name_ than _Pine_ uses by default, (for example, it uses "rfc822mail" instead of "mail"), then you may be able to use one or more of the four attribute configuration options instead of defining a custom filter: + email-attribute + name-attribute + surname-attribute + givenname-attribute Color Configuration If the terminal or terminal emulator you are using is capable of using color (see color-style option), or if you are using _PC-Pine_, then it is possible to set up _Pine_ so that various parts of the display will be shown in colors you configure. This is done using the Setup Color screen. The Setup Color screen is divided into four broad sections: Options, General Colors, Index Colors, and Header Colors. In addition to these four categories you may also color lines in the MESSAGE INDEX screen by configuring the Index Line Color. Each color is defined as a foreground color (the color of the actual text) and a background color (the color of the area behind the text). Color Options _current-indexline-style_ This option affects the colors used to display the current line in the MESSAGE INDEX screen. If you do not have Index Line Colors defined, then this option will have no effect. The available options include: flip-colors This is the default. If an index line is colored because it matches one of your Index Color Rules, then its colors will be reversed when it is the currently highlighted line. For example, if the line is normally red text on a blue background, then when it is the current line it will be drawn as blue text on a red background. The rest of the option values all revert to this flip-colors behavior if there is no Reverse Color defined. reverse With this option the Reverse color is always used to highlight the current line. reverse-fg The foreground part of the Reverse Color is used to highlight the current line. If this would cause the text to be unreadable (because the foreground and background colors are the same) or if it would cause no change in the color of the index line, then the colors are flipped instead. Some people think this works particularly well if you use different background colors to emphasize "interesting" lines, but always with the same Normal foreground color, and you use a different foreground color for the Reverse Color. reverse-fg-no-ambiguity With the "reverse-fg" rule above, it is possible that the resulting color will be exactly the same as the regular Reverse Color. That can lead to some possible confusion because an "interesting" line which is the current line will be displayed exactly the same as a non-interesting line which is current. You can't tell whether the line is just a regular current line or if it is an "interesting" current line by looking at the color. Setting the option to this value removes that ambiguity. It is the same as the "reverse-fg" setting unless the resulting interesting current line would look just like a non-interesting current line. In that case, the interesting line's colors are simply flipped (like in the default behavior). As an alternative way to preserve the line's interestingness in this case, you may find that using both a different foreground and a different background color for the interesting line will help. reverse-bg The background part of the Reverse Color is used to highlight the current line. If this would cause the text to be unreadable (because the foreground and background colors are the same) or if it would cause no change in the color of the index line, then the colors are flipped instead. Some people think this works particularly well if you use different foreground colors to emphasize "interesting" lines, but always with the same Normal background color, and you use a different background color for the Reverse Color. reverse-bg-no-ambiguity As with the "reverse-fg" case, the "reverse-bg" rule may also result in a color which is exactly the same as the regular Reverse Color. Setting the option to this value removes that ambiguity. It is the same as the "reverse-bg" setting unless the resulting current line has the same color as the Reverse Color. In that case, the interesting line's colors are simply flipped (like in the default behavior). _titlebar-color-style_ This option affects the colors used to display the titlebar (the top line on the screen) when viewing a message. The available options include: default The color of the titlebar will be the color you set for the Title Color. The Title Color may be set by using the indexline The color of the titlebar will be the same as the color of the index line corresponding to the message being viewed. The rules which determine what color the index line will be may be set up by going to the Setup/Rules/Indexcolor screen. If the index line for a message is not colored explicitly by the Indexcolor rules, then the titlebar will be colored the same as for the "default" option above (which is not the same color that the index line itself will have). reverse-indexline This is similar to the "indexline" option except the foreground and background colors from the corresponding index line will be reversed. For example, if the index line color is red letters on a white background, then the titlebar will be white letters on a red background. If the index line for a message is not colored explicitly by the Indexcolor rules, then the titlebar will be colored the same as for the "default" option above (which is not the same color that the index line itself will have). General Colors _Normal Color_ This is the color which most of the screen is painted in. _Reverse Color_ The color _Pine_ uses for reverse video characters. Actually, the name is misleading. This used to be reverse video and so the name remains. It is still used to highlight certain parts of the screen but the color may be set to whatever you'd like. _Title Color_ The color _Pine_ uses for the titlebar (the top line on the screen). By default, the Title Color is the same as the Reverse Color. The actual titlebar color may be different from the Title Color if the option titlebar-color-style is set to some value other than default. _Status Color_ The color _Pine_ uses for messages written to the status message line near the bottom of the screen. By default, the Status Color is the same as the Reverse Color. _KeyLabel Color_ The color _Pine_ uses for the labels of the commands in the two-line menu at the bottom of the screen. The label is the long name, for example, "PrevMsg". By default, the KeyLabel Color is the same as the Normal Color. WARNING: Some terminal emulators have the property that the screen will scroll down one line whenever a character is written to the character cell in the lower right corner of the screen. _Pine_ can usually avoid writing a character in that corner of the screen. However, if you have defined a KeyLabel Color then _Pine_ does have to write a character in that cell in order to color the cell correctly. If you find that your display sometimes scrolls up a line this could be the problem. The most obvious symptom is probably that the titlebar at the top of the screen scrolls off the screen. Try setting KeyLabel Color to Default to see if that fixes the problem. _KeyName Color_ The color _Pine_ uses for the names of the commands in the two-line menu at the bottom of the screen. The KeyName is the shorter name in the menu. For example, the "W" before the "WhereIs". By default, the KeyName Color is the same as the Normal Color. _Selectable-item Color_ The color _Pine_ uses for displaying selectable items, such as URLs. By default, the Selectable-item Color is the same as the Normal Color, except it is also Bold. _Quote Colors_ The colors _Pine_ uses for coloring quoted text in the MESSAGE TEXT screen. If a line begins with a > character (or space followed by >) it is considered a quote. That line will be given the Quote1 Color (first level quote). If there is a second level of quoting then the Quote2 Color will be used. _Pine_ considers there to be a second level of quoting if that first > is followed by another > (or space followed by >). If there are characters other than whitespace and > signs, then it isn't considered another level of quoting. Similarly, if there is a third level of quoting the Quote3 Color will be used. If there are more levels after that the Quote Colors are reused. If you define all three colors then it would repeat like Color1, Color2, Color3, Color1, Color2, Color3, ... If you only define the first two it would be Color1, Color2, Color1, Color2, ... If you define only the Quote1 Color, then the entire quote would be that color regardless of the quoting levels. By default, the Quote Colors are not defined. _Signature Color_ The color _Pine_ uses for coloring the signature in the MESSAGE TEXT screen. According to USENET conventions, the signature is defined as the paragraph following the "sigdashes", that is, the special line consisting of the three characters "-- " (i.e., dash, dash, and space). _Pine_ allows for one empty line right after the sigdashes to be considered as part of the signature. By default, the Signature Color is not defined, so will be the same as the Normal Color. _Prompt Color_ The color _Pine_ uses for confirmation prompts and questions which appear in the status message line near the bottom of the screen. By default, the Prompt Color is the same as the Reverse Color. Index Colors You may add color to the single character symbols which give the status of each message in the MESSAGE INDEX. By default the characters "+", "*", "D", "A", and "N" show up near the left hand side of the screen, depending on whether the message is addressed to you, and whether the message is marked Important, is Deleted, is Answered, or is New. You may set the color of those symbols. By default, all of these symbols are drawn with the same color as the rest of the index line they are a part of. Besides coloring the message status symbols, you may also color the entire index line. This is done by using the Index Line Color configuration screen. It is also possible to color (keywords in the index using the Setup/Kolor screen (Keyword Colors). _Index-to-me Symbol Color_ The color used for drawing the "+" symbol which signifies a message is addressed directly to you. _Index-important Symbol Color_ The color used for drawing the "*" symbol which signifies a message has been flagged Important. _Index-deleted Symbol Color_ The color used for drawing the "D" symbol which signifies a message has been marked Deleted. _Index-answered Symbol Color_ The color used for drawing the "A" symbol which signifies a message has been answered. _Index-new Symbol Color_ The color used for drawing the "N" symbol which signifies a message is New. _Index-recent Symbol Color_ The color used for drawing the "R" symbol which signifies a message is Recent (only visible if the "IMAPSTATUS" token is part of the index-format option). _Index-unseen Symbol Color_ The color used for drawing the "U" symbol which signifies a message is Unseen (only visible if the "IMAPSTATUS" token is part of the Index-Format option). Header Colors You may add color to the header fields in the MESSAGE TEXT screen. For example, you may set the color of the contents of the Subject field or the From field. For Header Colors, there is an additional line on the configuration screen labeled "Pattern to match". If you leave that blank, then the whole field for that header will always be colored. However, if you give a pattern to match, the coloring will only take place if there is a match for that pattern in the value of the field. For example, if you are working on a color for the Subject header and you fill in a pattern of "important", then only Subjects which contain the word "important" will be colored. For address fields like From or To, a pattern match will cause only the addresses which match the pattern to be colored. If the pattern you enter is a comma-separated list of patterns, then coloring happens if any of those patterns matches. Keyword Colors Sets the colors _Pine_ uses for Keyword fields in the MESSAGE INDEX screen. Keywords may be displayed as part of the Subject of a message by using the "SUBJKEY" or "SUBJKEYINIT" tokens in the Index-Format option. Keywords may also be displayed in a column of their own in the MESSAGE INDEX screen by using the "KEY" or "KEYINIT" tokens. For example, you might have set up a Keyword "Work" using the Keywords option in the Setup/Config screen. You could cause that Keyword to show up as a special color by setting up the Keyword Color using this option, and then including it in the MESSAGE INDEX screen using one of the tokens listed above in the Index-Format. Index Line Colors You may color whole index lines by using roles. This isn't configured in the Setup Colors screen, but is configured in the Setup Rules IndexColor screen. Index Line Color Configuration Index Line Color causes lines in the MESSAGE INDEX screen to be colored. This action is only available if your terminal is capable of displaying color and color display has been enabled with the Color-Style option. (In PC-Pine, color is always enabled so there is no option to turn on.) Each rule has a "Pattern", which is used to decide which of the rules is used; and the color which is used if the Pattern matches a particular message. Rule Patterns In order to determine whether or not a message matches a rule the message is compared with the rule's Pattern. These Patterns are the same for use with Roles, Filtering, Index Coloring, and Scoring, so are described in only one place, "here". Index Line Color This is the color that index lines are colored when there is a matching Pattern. This colors the whole index line, except possibly the status letters which may be colored separately using the Setup Kolor screen. Role Configuration You may play different roles depending on who you are replying to. For example, if you are replying to a message addressed to _help-desk_ you may be acting as a Help Desk Worker. That role may require that you use a different return address and/or a different signature. Roles are optional. If you set up roles they work like this: Each role has a set of "Uses", which indicate whether or not a role is eligible to be considered for a particular use; a "Pattern", which is used to decide which of the eligible roles is used; and a set of "Actions", which are taken when that role is used. When you reply to a message, the message you are replying to is compared with the Patterns of the roles marked as eligible for use when replying. The comparisons start with the first eligible role and keep going until there is a match. If a match is found, the matching role's Actions are taken. Role Uses There are three types of use to be configured; one for Replying, one for Forwarding, and one for Composing. These indicate whether or not you want a role to be considered when you type the Reply, Forward, or Compose commands. (The Role command is an alternate form of the Compose command, and it is not affected by these settings.) Each of these Use types has three possible values. The value "Never" means that the role will never be considered as a candidate for use with the corresponding command. For example, if you set a role's Reply Use to Never, then when you Reply to a message, the role won't even be considered. (That isn't quite true. If the message you are replying to matches some other role which requires confirmation, then there will be a ^T command available which allows you to select a role from all of your roles, not just the reply-eligible roles.) The options "With confirmation" and "Without confirmation" both mean that you do want to consider this role when using the corresponding command. For either of these settings the role's Pattern will be checked to see if it matches the message. For Reply Use, the message used to compare the Patterns with is the message being replied to. For Forward Use, the message used to compare the Pattern with is the message being forwarded. For Compose Use, there is no message, so the parts of the Pattern which depend on a message (everything other than Current Folder Type) are ignored. In all cases, the Current Folder is checked if defined. If there is a match then this role will either be used without confirmation or will be the default when confirmation is asked for, depending on which of the two options is selected. If confirmation is requested, you will have a chance to choose No Role instead of the offered role, or to change the role to any one of your other roles (with the ^T command). Role Patterns In order to determine whether or not a message matches a role the message is compared with the Role Pattern. These Patterns are the same for use with Roles, Filtering, Index Coloring, and Scoring, so are described in only one place, "here". Since header patterns, AllText patterns, and BodyText patterns which are unset are ignored, a role which has all header patterns unset, the AllText pattern unset, the BodyText pattern unset, the Score Interval unset, and the Current Folder Type set to "Any" may be used as a default role. It should be put last in the list of roles since the matching starts at the beginning and proceeds until one of the roles is a match. If no roles at all match, then _Pine_ will use its regular methods of defining the role. If you wanted to, you could define a different "default" role for Replying, Forwarding, and Composing by setting the "Use" fields appropriately. Role Actions Once a role match is found, the role's Actions are taken. For each role there are several possible actions that may be defined. They are actions to set the From address, the Reply-To address, the Fcc, the Signature file, and the Template file. Initialize Settings Using Role This is a power user feature. You will usually want to leave this field empty. The value of this field is the nickname of another one of your roles. The Action values from that other role are used as the initial values of the Action items for this role. If you put something in any of the action fields for this role, that will override whatever was in the corresponding field of the initializer role. You might use this field if the "Action" part of one of your roles is something you want to use in more than one role. Instead of filling in those action values again for each role, you may give the nickname of the role where the values are filled in. It's just a shortcut way to define Role Actions. Here's an example to help explain how this works. Suppose you have a role with nickname "role1" and role1 has (among other things) Set Reply-To = The Pres set. If in "role2" you set "Initialize settings using role" to "role1", then role2 will inherit the Set Reply-To value from role1 by default (and any of the other inheritable action values that are set). So if role2 had Set Reply-To = defined, the Reply-To used with role2 would be "The Pres " However, if role2 had Set Reply-To = VP defined, then the Reply-To used with role2 would be "VP " instead. If you wish, you may choose a nickname from your list of roles by using the "T" command. If the role you are using to initialize also has a role it initializes from, then that initialization happens first. That is, inheritance works as expected with the grandparent and great-grandparent (and so on) roles having the expected effect. Set From This field consists of an address (or comma-separated list of addresses) which will be used as the From address on the message you are sending. This should be a fully-qualified address like Full Name or just user@domain If this is left blank, then the normal From address will be used. Set Reply-To The Reply-To address is the address (or comma-separated list of addresses) used on the Reply-To line of the message you are sending. You don't need a Reply-To address unless it is different from the From address. This should be a fully-qualified address like Full Name or just user@domain If this is left blank, then there won't be a Reply-To address unless you have configured one specially with the customized-hdrs configuration option. Set Other-Hdrs This field gives you a way to set values for headers besides "From" and "Reply-To". If you want to set either of those, use the specific "Set From" and "Set Reply-To" settings. This field is similar to the customized-hdrs option. Each header you specify here must include the header tag ("To:", "Approved:", etc.) and may optionally include a value for that header. In order to see these headers when you compose using this role you must use the rich header command. Here's an example which shows how you might set the To address. Set Other Hdrs = To: Full Name Headers set in this way are different from headers set with the customized-hdrs option in that the value you give for a header here will replace any value that already exists. For example, if you are Replying to a message there will already be at least one address in the To header (the address you are Replying to). However, if you Reply using a role which sets the To header, that role's To header value will be used instead. The customized-hdrs headers are defaults. Because commas are used in the configuration file to separate the list of Other Hdrs, you need to quote the value if that value contains a comma. Use double quotes and place the quotes around the entire value part of the header, not including the name of the header. For example, you might have Organization: "My Organization Name, My City" as one of the Other Hdrs. Set Fcc This field consists of a single folder name which will be used in the Fcc field of the message you are sending. You may put anything here that you would normally type into the Fcc field from the composer. In addition, an fcc of "" (two double quotation marks) means no Fcc. A blank field here means that _Pine_ will use its normal rules for deciding the default value of the Fcc field. For many roles, perhaps most, it may make more sense for you to use the other _Pine_ facilities for setting the Fcc. In particular, if you want the Fcc to depend on who you are sending the message to then the fcc-name-rule is probably more useful. In that case, you would want to leave the Fcc field here blank. However, if you have a role that depends on who the message you are replying to was From, or what address that message was sent to; then it might make sense to set the Fcc for that role here. Set LiteralSig This field contains the actual text for your signature, as opposed to the name of a file containing your signature. If this is defined it takes precedence over any value set in the _Set Signature_ field. This is simply a different way to store the signature. The signature is stored inside your Pine configuration file instead of in a separate signature file. Tokens work the same way they do with _Set Signature_. The two character sequence \n (backslash followed by the character n) will be used to signify a line-break in your signature. You don't have to enter the \n, but it will be visible in the CHANGE THIS ROLE RULE window after you are done editing the signature. Set Signature The Signature is the name of a file to be used as the signature file when this role is being used. If the filename is followed by a vertical bar (|) then instead of reading the contents of the file the file is assumed to be a program which will produce the text to be used on its standard output. The program can't have any arguments and doesn't receive any input from _Pine_, but the rest of the processing works as if the contents came from a file. Signature files may be stored remotely on an IMAP server. In order to do that you just give the file a remote name. This works just like the regular signature-file option which is configured from the Setup/Configuration screen. A remote signature file name might look like: {myimaphost.myschool.k12.wa.us}mail/sig3 or, if you have an SSL-capable version of _Pine_, you might try {myimaphost.myschool.k12.wa.us/user=loginname/ssl}mail/sig3 Once you have named the remote signature file you create its contents by using the "F" "editFile" command when the cursor is on the "Set Signature" line of the role editor. Besides containing regular text, a signature file may also contain (or a signature program may produce) tokens which are replaced with text which depends on the message you are replying to or forwarding. The tokens all look like _word_ (a word surrounded by underscores). For example, if the token _DATE_ is included in the text of the signature file, then when you reply to or forward a message, the token will be replaced with the actual date the message you are replying to or forwarding was sent. If you use a role which has a signature file for a plain composition (that is, not a reply or forward) then there is no original message, so any tokens which depend on the message will be replaced with nothing. So if you want a signature file to be useful for new compositions it shouldn't include any of the tokens which depend on the message being replied to or forwarded. The list of available tokens is here. Actually, for the adventurous, there is a way to conditionally include text based on whether or not a token would result in specific replacement text. For example, you could include some text based on whether or not the _NEWS_ token would result in any newsgroups if it was used. It's explained in detail here. In the very unlikely event that you want to include a literal token in a signature file, you must precede it with a backslash character. For example, to include the literal text _DATE_ you must actually use \_DATE_. It is not possible to have a literal backslash followed by an expanded token. A blank field here means that _Pine_ will use its normal rules for deciding which file (if any) to use for the signature file. Set Template A Template is the name of a file to be included in the message when this role is being used. The template file is a file which is included at the top of the message you are composing. If the filename is followed by a vertical bar (|) then instead of reading the contents of the file the file is assumed to be a program which will produce the text to be used on its standard output. The program can't have any arguments and doesn't receive any input from _Pine_, but the rest of the processing works as if the contents came from a file. Template files may be stored remotely on an IMAP server. In order to do that you just give the file a remote name. This works just like the regular signature-file option which is configured from the Setup/Configuration screen. A remote template file name might look like: {myimaphost.myschool.k12.wa.us}mail/templ3 or, if you have an SSL-capable version of _Pine_, you might try {myimaphost.myschool.k12.wa.us/user=loginname/ssl}mail/templ3 Once you have named the remote template file you create its contents by using the "F" "editFile" command when the cursor is on the "Set Template" line of the role editor. Besides containing regular text, a template file may also contain (or a template file program may produce) tokens which are replaced with text which depends on the message you are replying to or forwarding. The tokens all look like _word_ (a word surrounded by underscores). For example, if the token _DATE_ is included in the text of the template file, then when you reply to or forward a message, the token will be replaced with the actual date the message you are replying to or forwarding was sent. If you use a role which has a template file for a plain composition (that is, not a reply or forward) then there is no original message, so any tokens which depend on the message will be replaced with nothing. So if you want a template file to be useful for new compositions it shouldn't include any of the tokens which depend on the message being replied to or forwarded. The list of available tokens is here. Actually, for the adventurous, there is a way to conditionally include text based on whether or not a token would result in specific replacement text. For example, you could include some text based on whether or not the _NEWS_ token would result in any newsgroups if it was used. It's explained in detail here. In the very unlikely event that you want to include a literal token in a template file, you must precede it with a backslash character. For example, to include the literal text _DATE_ you must actually use \_DATE_. It is not possible to have a literal backslash followed by an expanded token. A blank field here means that _Pine_ will not use a template file when this role is being used. Use SMTP Server If this field has a value, then it will be used as the SMTP server to send mail when this role is being used (unless the SMTP server variable is set in the system-wide fixed configuration file). It has the same semantics as the smtp-server variable in the Setup/Config screen. When you postpone the composition this SMTP server list will be saved with the postponed composition and it cannot be changed later. Because of that, you may want to make this a list of SMTP servers with the preferred server at the front of the list and alternate servers later in the list. If any of the actions are left unset, then the action depends on what is present in the "Initialize settings using role" field. If you've listed the nickname of another one of your roles there, then the corresponding action from that role will be used here. If that action is also blank, or if there is no nickname specified, then _Pine_ will do whatever it normally does to set these actions. This depends on other configuration options and features you've set. Filtering Configuration The software which actually delivers mail (the stuff that happens before _Pine_ is involved) for you is in a better position to do mail filtering than _Pine_ itself. If possible, you may want to look into using that sort of mail filtering to deliver mail to different folders, delete it, or forward it. However, if you'd like _Pine_ to help with this, _Pine_'s filtering is for you. Filtering is a way to automatically move certain messages from one folder to another or to delete messages. It can also be used to set message status bits (Important, Deleted, New, Answered). _Pine_ doesn't have the ability to forward mail to another address. Each filtering rule has a "Pattern" and a "Filter Action". When a folder is opened, when new mail arrives in an open folder, or when mail is Expunged from a folder; each message is compared with the Patterns of your filtering rules. The comparisons start with the first rule and keep going until there is a match. If a match is found, the message may be deleted or moved, depending on the setting of the Filter Action. If the message is not deleted, it may have its status altered. For efficiency, each message is usually only checked once. When new mail arrives, the new messages are checked but not the old. There are some exceptions to this rule. The expunge command will cause all messages to be rechecked, as will editing of the filtering rules. _NOTE:_ When setting up a Pattern used to delete messages, it is recommended that you test the Pattern first with a "Move" folder specified in case unintended matches occur. Messages that are deleted will be removed from the folder and _unrecoverable_ from within _Pine_ after the next Expunge command or once the folder being filtered has been closed. Filter Patterns In order to determine whether or not a message matches a filter the message is compared with the Filter's Pattern. These Patterns are the same for use with Roles, Filtering, Index Coloring, Scoring, and Other Rules, so are described in only one place, "here". Since filtering is a potentially destructive action, if you have a filtering Pattern with nothing other than Current Folder Type set, that filtering rule is ignored. Filter Actions Once a filter match is found for a particular message, there are some actions which may be taken. First, the message may have its status changed. This is the same message status that you can manipulate manually using the Flag Command. There are four elements of message status that you can control. You can set or clear the Important status, the New status, the Deleted status, and the Answered status. Of course, if the filter is going to delete the message, then there is no point in setting message status. You may also set or clear user-defined keywords for a message. Second, the filter may delete or move the message. Deleting the message marks it Deleted and removes it from view. It is effectively gone forever (though it technically is still there until the next expunge command, which may happen implicitly). Moving the message moves it from the open folder into the folder listed on the "Folder List" line of the filter configuration. If you list more than one folder name (separated by commas) then the message will be copied to each of those folders. In any case, if "Delete" or "Move" is set then the message is removed from the current folder. If you just want to set the messages status without deleting it from the folder, then set the filter action to "Just Set Message Status". (There is no way to do a Copy instead of a Move, due to the difficulties involved in keeping track of whether or not a message has already been copied by a previous _Pine_ session.) Move-only-if-not-deleted option If you have specified a Move to Folder to filter messages into, then this option has an effect. If this option is set then messages will only be moved into the specified folder if they aren't already marked deleted. This might be useful if you have more than one _Pine_ session running simultaneously and you don't want messages to be filtered into a folder more than once. This method is not foolproof. There may be cases where a message gets marked deleted and so it is never filtered into the folder. For example, if you deleted it in another _Pine_ or another mail program that didn't know about the filtering rule. This option has no effect if the Filter Action is not set to Move. Dont-quit-even-if-rule-matches option If this option is set then this is a non-terminating rule. Usually, for each message, _Pine_ searches through the filter rules until a match is found and then it performs the action associated with that rule. Rules following the match are not considered. If this option is set then the search for matches will continue at the next rule. If a non-terminating rule matches then the actions associated with that rule, except for any implied deletion of the message, are performed before the match for the next rule is checked. For example, if the non-terminating rule sets the Important status, then that status will be set when the next rule is considered. However, if the non-terminating rule Moves the message, the message will actually be copied instead of copied and deleted so that it is still there for the next rule. A moved message is deleted after all the relevant rules have been checked. The name of the "Move" action is confusing in this case because a single message can be moved to more than one folder. It turns the Move into a Copy instead, but it is still followed by a deletion at the end. This option may be useful if you want to have a single message filtered to two different folders because it matches two different Patterns. For example, suppose you normally filter messages to a particular mailing list into one folder, and messages addressed directly to you into a second folder. If a message is sent to both you and the list (and you can tell that by looking at the headers of the message) this option may give you a convenient way to capture a copy to each folder. (It may also cause you to capture two copies to each folder, depending on whether your mail system delivers one or two copies of the message to you and on how the list works.) Scoring Configuration Most people will not use scores at all, but if you do use them, here's how they work in Pine. Using this screen, you may define Scoring rules. The score for a message is calculated by looking at every Score rule defined and adding up the Score Values for the ones which match the message. If there are no matches for a message, it has a score of zero. Message scores may be used a couple of ways in Pine. Sorting by Score One of the methods you may use to sort message indexes is to sort by score. The scores of all the messages in a folder will be calculated and then the index will be ordered by placing the messages in order of ascending or descending score. Scores for use in Patterns The Patterns used for Roles, Index Line Coloring, and Filtering have a category labeled "Score Interval". When a message is being compared with a Pattern to check for a match, if the Score Interval is set only messages which have a score somewhere in the interval are a match. Scoring Rule Patterns In order to determine whether or not a message matches a scoring rule the message is compared with the rule's Pattern. These Patterns are the same for use with Roles, Filtering, Index Coloring, and Scoring, so are described in only one place, "here". Actually, Scoring rule Patterns are slightly different from the other types of Patterns because Scoring rule Patterns don't contain a Score Interval. In other words, when calculating the score for a message, which is done by looking at the Scoring rule Patterns, scores aren't used. Score Value This is the value that will be added to the score for a message if the rule's Pattern is a match. Each individual Score Value is an integer between -100 and 100, and the values from matching rules are added together to get a message's score. Other Rules Configuration Using this screen, you may define configuration Rules which don't fit nicely into the other Rules categories. Other Rule Patterns Other Rules are a little different from the rest of the Rules because they depend only on the current folder, and not on a particular message. In order to determine whether or not a rule's actions should be applied the current folder is compared with the rule's Pattern, which consists of only the Current Folder Type. Current Folder Type works the same for Other Rules as it does for Roles, Filtering, Index Coloring, and Scoring. Keep in mind that the only part of the Pattern which applies to Other Rules is the Current Folder Type when looking at the description of Patterns given "here". Other Rule Actions Once a pattern match is found, the rule's Actions are taken. Neither of the following two rule's depends on a message for its match. That means that all the parts of the Pattern which depend on matching an attribute of a message are ignored. So the only part of the Pattern that matters for these Actions is the Current Folder Type. Set Sort Order When you enter a new folder, these rules will be checked to see if you have set a sort order which is different from your default sort order. The default is set in the Setup/Config screen with the Sort-Key option. If the Sort Order action is set, then the folder will be displayed sorted in that sort order instead of in the default order. A possible point of confusion arises when you change the configuration of the Sort Order for the currently open folder. The folder will normally be re-sorted when you go back to viewing the index. However, if you have manually sorted the folder with the Sort command, it will not be re-sorted. Set Index Format When you enter a new folder, these rules will be checked to see if you have set an Index Format which is different from your default Index Format, which is set with the Index-Format option. If so, the index will be displayed with this format instead of the default. Set Startup Rule When you enter a new folder, these rules will be checked to see if you have set a startup rule which is different from the default startup rule. The default for incoming folders is set in the Setup/Config screen with the "incoming-startup-rule" option. The default for folders other than INBOX that are not part of your incoming collection (see enable-incoming-folders feature) is to start with the last message in the folder. If the Startup Rule is set to something other than "default", then the rule will determine which message will be the current message when the folder is first opened. The various startup rule possibilities work the same here as they do in the incoming collection, except that the folder can be any specific folder or any folder type. Patterns Patterns are used with Roles, Filtering, Index Coloring, Scoring, and Other Rules. Patterns are compared with a message to see if there is a match. For Filtering, the messages being checked are all the messages in the folder, one at a time. For Index Line Coloring, each message that is visible on the screen is checked for matches with the Index Coloring Patterns. Roles are used with the Reply, Forward, and Compose commands. For Reply, the message used to compare the Pattern with is the message being replied to; for Forward, the message used to compare the Pattern with is the message being forwarded; and for Compose, there is no message, so the parts of the Pattern which depend on a message (everything other than Current Folder Type and the Beginning of Month and Year) are not used. Only the Current Folder Type matters for Compose (plus the Beginning of Month or Year, which you wouldn't usually use for a Role). For Scoring, the message being scored is compared with all of the Score Patterns, and the Score Values from the ones that match are added together to get the message's score. For Other Rules, there is no message. Only the Current Folder Type is checked for Other Rules. Each Pattern has several possible parts, all of which are optional. In order for there to be a match, _ALL_ of the _defined_ parts of the Pattern must match the message. If a part is not defined it is considered a match. For example, if the To pattern is not defined it will be displayed as To pattern = That is considered a match because it is not defined. This means that the Pattern with nothing defined is a match if the Current Folder Type matches, but there is an exception. Because filtering is a potentially destructive action, filtering Patterns with nothing other than Current Folder Type defined are ignored. If you really want a filtering Pattern to match all messages (subject to Current Folder Type) the best way to do it is to define a Score interval which includes all possible scores. This would be the score interval (-INF,INF). This can be used even if you haven't defined any rules to Set Scores. There are six predefined header patterns called the To, From, Sender, Cc, News, and Subject patterns. Besides those six predefined header patterns, you may add additional header patterns with header fieldnames of your choosing. You add an extra header pattern by placing the cursor on one of the patterns while in the role editor and using the "eXtraHdr" command. The Recip pattern is a header pattern which stands for Recipient (To OR Cc) and the Partic pattern is a header pattern which stands for Participant (From OR To OR Cc). (Defining the Recip pattern does not have the same effect as defining both the To and Cc patterns. Recip is To _OR_ Cc, not To _AND_ Cc.) Similar to the header patterns are the AllText pattern and the BodyText pattern. Instead of comparing this pattern's text against only the contents of a particular header field, the text for the AllText pattern is compared with text anywhere in the message's header or body, and the text for the BodyText pattern is compared with text anywhere in the message's body. Any of the header patterns, the AllText pattern, or the BodyText pattern may be negated with the "!" "toggle NOT" command. You can tell that _NOT_ has been turned on by looking for the character "!" at the beginning of the pattern line. When the "!" is present, it reverses the meaning of the match. That is, if the pattern matches then it is considered to NOT be a match, and if it does not match it is considered to be a match. Don't make the mistake of putting the "!" in the data field for a pattern. For example, if you type the characters "!urgent" into the Subject pattern, the pattern will look like: Subject pattern = !urgent This means you want to match the 7 character sequence "!urgent". In order to match messages which do not have "urgent" in their Subject field, first type the characters "urgent" followed by carriage return for the value of the Subject pattern, then negate it by typing the "!" command. It should look like ! Subject pattern = urgent The contents of each of these header patterns (or the AllText or BodyText patterns) may be a complete email address, part of an address, or a random set of characters to match against. It may also be a list of such patterns, which means you are looking for a match against the first pattern in the list _OR_ the second pattern _OR_ the third and so on. For example, a Subject pattern equal to Subject pattern = urgent emergency alert would match all messages with a subject which contained at least one of those words. It would also match subjects containing the words "alerts" or "Urgently". The same example with "NOT" turned on would be ! Subject pattern = urgent emergency alert which would match all messages with a subject which did NOT contain any of those words. You can use the "Add Value" command to add new words to the list, or you can enter them as a comma-separated list. (It is not possible to specify two patterns which must _BOTH_ be present for a match. It is only possible to specify that _EITHER_ pattern1 _OR_ pattern2 must be present, and that is exactly what using a list does.) The "Current Folder Type" and the "Score Interval" are also part of the Pattern, although the "Score Interval" is not used when checking for matches for Scoring. There are five similar settings which relate to the status of the message. These settings rely on the message being New or not, Deleted or not, Answered or not, Important or not, and Recent or not. There are also some other miscellaneous settings. The first is the Age of the message in days. Another is the Size of the message in bytes. The third is a setting which detects whether or not the Subject of a message contains raw 8-bit characters (unencoded characters with the most significant bit set). There is a setting which detects whether or not this is the first time _Pine_ has been run this month (doesn't depend on individual messages), and another which detects whether or not this is the first time _Pine_ has been run this year. Other parts of the Pattern detect whether or not the From address of a message appears in your address book, whether or not certain keywords are set for a message, and whether or not certain character sets are used in a message. Parts of a Pattern Header patterns A header pattern is simply text which is searched for in the corresponding header field. For example, if a Pattern has a From header pattern with the value "@company.com", then only messages which have a From header which contains the text "@company.com" will be possible matches. Matches don't have to be exact. For example, if the relevant field of a message contains the text "mailbox@domain" somewhere in it, then header patterns of "box", or "x@d", or "mailbox@domain" are all matches. All parts of the Pattern must match so, for example, if a message matches a defined From pattern, it still must be checked against the other parts of the Pattern which have been defined. The To header pattern is a slightly special case. If the message being checked has a Resent-To header, the addresses there are used in place of the addresses in the To header. This is only true for the To header. Resent-cc and Resent-From headers are never used unless you add them with the eXtraHdrs command. The meaning of a header pattern may be negated with the "!" "toggle NOT" command. You can tell that _NOT_ has been turned on by looking for the character "!" at the beginning of the pattern line. It would look something like ! From pattern = susan@example.com When the "!" is present, it reverses the meaning of the match. If you want to check for the presence of a header field but don't care about its value, then the empty pattern which you get by entering a pair of double quotes ("") should match any message which has the corresponding header field. AllText patterns AllText patterns are just like header patterns except that the text is searched for anywhere in the message's headers or body, not just in the contents of a particular header field. BodyText patterns BodyText patterns are just like header patterns except that the text is searched for anywhere in the message's body, not just in the contents of a particular header field. If there is more than one header pattern or AllText pattern or BodyText pattern for which you want to take the same action there is a shorthand notation which may be used. Any of these patterns may be a list of patterns instead of just a single pattern. If any one of the patterns in the list matches the message then it is considered a match. For example, if "company1" and "company2" both required you to use the same role when replying to messages, you might have a To pattern which looks like To pattern = company1.com company2.com This means that if the mail you are replying to was addressed to either "anything@company1.com" or "anything@company2.com", then this Pattern is a match and the same actions will be taken. The meaning of an AllText or BodyText pattern may be negated with the "!" "toggle NOT" command. You can tell that _NOT_ has been turned on by looking for the character "!" at the beginning of the pattern line. When the "!" is present, it reverses the meaning of the match. A technicality: Since comma is the character used to separate multiple values in any of the fields which may have multiple values (such as header patterns, AllText patterns, BodyText patterns, keywords, folder lists, and so on), you must escape comma with a backslash (\) if you want to include a literal comma in one of those fields. In other words, if you type a backslash followed by a comma it will be interpreted as a comma by _Pine_, instead of as a separator between pattern values. All other backslashes (those not followed by a comma) are literal backslashes and should not be escaped. It's unlikely you'll ever need to enter a literal comma or backslash in any of the patterns. Current Folder Type The "Current Folder Type" may be set to one of four different values: "Any", "News", "Email", or "Specific". If the value is set to "News", then the Pattern will only match if the currently open folder is a newsgroup. The value "Email" only matches if the current folder is not news and the value "Any" causes any folder to match. If the value of "Current Folder Type" is set to "Specific", then you must fill in a value for "Folder", which is on the line below the "Specific" line. In this case you will only get a match if the currently open folder is the specific folder you list. You may give a list of folders instead of just a single folder name, in which case the Pattern will match if the open folder is any one of the folders in the list. The name of each folder in the list may be either "INBOX", the technical specification of the folder (like what appears in your configuration file) or, if the folder is one of your incoming folders, it may be the nickname you've given the folder. Here are some samples of specific folder names: {monet.art.example.com}mail/art-class {news.example.com/nntp}#news.comp.mail.pine mail/local-folder The easiest way to fill in the "Folder" field is to use the "T" command which is available when the "Folder" line is hilighted, or to use the "Take" command with the configuration feature "enable-rules-under-take" turned on. When reading a newsgroup, there may be a performance penalty incurred when collecting the information necessary to check whether or not a Pattern matches a message. For this reason, the default Current Folder Type is set to "Email". If you have Patterns with a Current Folder Type of either "Any" or "News" and those Patterns are used for Index Line Coloring or Scoring, you may experience slower screen redrawing in the MESSAGE INDEX screen when in a newsgroup. Age Interval The "Age Interval" may be set to an interval of message ages which should be considered a match. Like the other parts of the Pattern, if it is unset it will be ignored. The Age Interval looks like (min_age,max_age) where "min_age" and "max_age" are integers greater than or equal to zero. The special value "INF" may be used for the max value. It represents infinity. Actually, this option may be defined as a list of intervals instead of just a single interval. The list is separated by commas. It can look like (min_age1,max_age1),(min_age2,max_age2),... When there is an Age Interval defined, it is a match if the age, in days, of the message is contained in any of the intervals. The intervals include both endpoints. Even though this option is called Age, it isn't actually the _age_ of the message. Instead, it is how many days ago the message arrived in one of your folders. If the current time is a little past midnight, then a message that arrived just before midnight arrived yesterday, even though the message is only a few minutes old. By default, the date being used is not the date in the Date header of the message. It is the date that the message arrived in one of your folders. When you Save a message from one folder to another that arrival date is preserved. If you would like to use the date in the Date header that is possible. Turn on the option _use-date-header-for-age_ near the bottom of the rule definition. A value of 0 is today, 1 is yesterday, 2 is the day before yesterday, and so on. Size Interval The "Size Interval" may be set to an interval of message sizes which should be considered a match. Like the other parts of the Pattern, if it is unset it will be ignored. The Size Interval looks like (min_size,max_size) where "min_size" and "max_size" are integers greater than or equal to zero. The special value "INF" may be used for the max value. It represents infinity. Actually, this option may be defined as a list of intervals instead of just a single interval. The list is separated by commas. It can look like (min_size1,max_size1),(min_size2,max_size2),... When there is a Size Interval defined, it is a match if the size, in bytes, of the message is contained in any of the intervals. The intervals include both endpoints. Score Interval The "Score Interval" may be set to an interval of message scores which should be considered a match. Like the other parts of the Pattern, if it is unset it will be ignored. The Score Interval looks like (min_score,max_score) where "min_score" and "max_score" are integers between -32000 and 32000. The special values "-INF" and "INF" may be used for the min and max values to represent negative and positive infinity. Actually, a list of intervals may be used if you wish. A list would look like (min_score1,max_score1),(min_score2,max_score2),... When there is a Score Interval defined, it is a match if the score for the message is contained in any of the intervals in the list. The intervals include the endpoints. The score for a message is calculated by looking at every Score rule defined and adding up the Score Values for the ones which match the message. When deciding whether or not a Pattern matches a message for purposes of calculating the score, the Score Interval is ignored. Message Status There are five separate message status settings. By default, all five are set to the value "Don't care", which will match any message. The value "Yes" means that the particular status must be true for a match, and the value "No" means that the particular status must not be true for a match. For example, one of the five Message Status settings is whether a message is marked Important or not. A "Yes" means that the message must be Important to be considered a match and "No" means that the message must not be Important to be considered a match. The same is true of the other four message status settings which depend on whether or not the message is New; whether the message has been Answered or not; whether the message has been Deleted or not, and whether the message is Recent or not. The nomenclature is a bit confusing. New means that the message is Unseen. It could have been in your mailbox for a long time but if you haven't looked at it, it is still considered New. That matches the default _Pine_ index display which shows an N for such a message. Recent means that the message was added to this folder since the last time you opened the folder. Message Keywords Keywords are similar to Message Status, but they are chosen by the user. Provided the mail server allows for it, you may add a set of possible keywords to a folder and then you may set those keywords or not for each message in the folder. The syntax of this part of the Pattern is similar to the header patterns. It is a list of keywords. The Keyword part of the Pattern is a match if the message has any of the keywords in the list set. Like other parts of the Pattern, if this is unset it will be ignored. Message Character Set A message may use one or more character sets. This part of the Pattern matches messages which make use of one or more of the character sets specified in the pattern. It will be considered a match if a message uses any of the character sets in the list you give here. The syntax of this part of the Pattern is similar to the header patterns and the Message Keywords pattern. It is a list of character sets. Besides actual character set names (for example, ISO-8859-7, KOI8-R, or GB2312) you may also use some shorthand names that _Pine_ provides. These names are more understandable shorthand names for sets of character set names. Two examples are "Cyrillic" and "Greek". Selecting one of these shorthand names is equivalent to selecting all of the character sets that make up the set. You can see all of these shorthand names and the lists of character sets they stand for by typing the "T" command with the Character Set pattern highlighted. The Character Set part of the Pattern is a match if the message uses any of the character sets in the list. Like other parts of the Pattern, if this is unset it will be ignored. Raw 8-bit in Subject It seems that lots of unwanted email contains unencoded 8-bit characters in the Subject. Normally, characters with the 8th bit set are not allowed in the Subject header unless they are MIME-encoded. This option gives you a way to match messages which have Subjects which contain unencoded 8-bit characters. Setting this option will affect performance in large folders because the subject of each message in the folder has to be checked. Beginning of Month This option gives you a way to take some action once per month. The value "Yes" means that this must be the first time _Pine_ has been run this month in order to count as a match, Beginning of Year This option gives you a way to take some action once per year. The value "Yes" means that this must be the first time _Pine_ has been run this year in order to count as a match, From or Reply-To address in Address Books This option gives you a way to match messages which have a From or a Reply-To address which is in one of your address books. Only the simple entries in your address books are searched. Address book distribution lists are ignored! Setting this option will affect performance in large folders because the From and Reply-To of each message in the folder have to be checked. Categorizer Command This is a command that is run with its standard input set to the message being checked and its standard output discarded. The full directory path should be specified. The command will be run and then its exit status will be checked against the Exit Status Interval, which defaults to just the value zero. If the exit status of the command falls in the interval, it is considered a match, otherwise it is not a match. This option may actually be a list of commands. The first one that exists and is executable is used. That makes it possible to use the same configuration with Unix _Pine_ and _PC-Pine_. If none of the commands in the list exists and is executable then the rule is _not_ a match. If it is possible that the command may not exist, you should be careful to structure your rules so that nothing destructive happens when the command does not exist. For example, you might have a filter that filters away spam when there is a match but does nothing when there is not a match. That would continue to work correctly if the command didn't exist. However, if you have a filter which filters away spam when there is not a match and keeps it when there is a match, that would filter everything if the categorizer command didn't exist. Help Configuring Pattern Fields _Nickname_ This is a nickname to help you. You should have a different nickname for each role you define. The nickname will be used in the SETUP ROLE RULES screen to allow you to pick a role to edit. It will also be used when you send a message to let you know you are sending with a different role than you use by default, and it will be useful for choosing a role when composing with the Role command or when composing with one of the Role Uses set to With Confirmation. This field is not used in the outgoing message. _Comment_ This is a comment to help you. This comment does not play any functional role, it is simply an optional comment to help you remember what the rule is for. _To pattern_ If this pattern is non-blank, then for this role to be considered a match, at least one of the recipients from the To line of the message being replied to or forwarded must match this pattern. In the case of the Compose command, this pattern and the other header patterns are ignored. If this pattern is a list of patterns, then at least one of the recipients must match at least one of the patterns. (Any other non-blank parts of the Pattern must match, too.) If the message being replied to or forwarded has a Resent-To header line, then that is used in place of the To line. (Note that this special Resent rule only applies to the To header. The Resent-From, Resent-Subject, and so on are not consulted.) It is possible to add a _NOT_ to the To Pattern meaning with the "!" "toggle NOT" command. This changes the meaning of the To pattern so that it has the opposite meaning. It will be considered a match if there are no matches between the addresses in the To: line and the list of To patterns. Don't make the mistake of putting the "!" in the data field for the pattern. For example, if you type the characters "!frizzle" into the To pattern, the pattern will look like: To pattern = !frizzle This means you want to match the 8 character sequence "!frizzle". In order to match messages which do not have "frizzle" in their To field, first type the characters "frizzle" followed by carriage return for the value of the To pattern, then negate it by typing the "!" command. It should end up looking like ! To pattern = frizzle _From pattern_ This is just like the To pattern except that it is compared with the address from the From header of the message being replied to or forwarded instead of the addresses from the To header. _Sender pattern_ This is just like the To pattern except that it is compared with the address from the Sender header of the message being replied to or forwarded instead of the addresses from the To header. If there is no Sender header, then the From header is used instead. _Cc pattern_ This is just like the To pattern except that it is compared with the address from the CC header of the message being replied to or forwarded instead of the addresses from the To header. _News pattern_ If this pattern is non-blank, then for this role to be considered a match, at least one of the newsgroups from the Newsgroups line of the message must match this pattern. If this pattern is a list of patterns, then at least one of the newsgroups must match at least one of the patterns. (Any other non-blank parts of the Pattern must match, too.) _Subject pattern_ This is similar to the other header patterns. It is compared with the contents from the Subject of the message being replied to or forwarded. If you enter non-ascii characters in this field then the search will be done using the character set you have defined with the Character-Set configuration variable. (The truly sophisticated may use an alternate character set for a search by entering the MIME encoding of the header string here.) _Extra header patterns_ There isn't actually a field called Extra header patterns, but you may add extra header patterns by moving the cursor to one of the header patterns and using the "eXtraHdr" command to add a new header pattern. You would do this if the six predefined header patterns don't cover the header you want to use for pattern matching. Once you've added an extra header pattern, you use it just like the Subject pattern. Of course, it is compared with the contents from the particular header field of the message being replied to or forwarded rather than the contents from the subject field. To remove an extra header pattern from a role, use the "RemoveHdr" command on the highlighted extra header. If you enter non-ascii characters in this field then the search will be done using the character set you have defined with the Character-Set configuration variable. (The truly sophisticated may use an alternate character set for a search by entering the MIME encoding of the header string here.) _Recipient pattern_ This is just like the To pattern except that it is compared with the addresses from both the To header and the Cc header instead of just the addresses from the To header. It's equivalent to having two different rules; one with a To pattern and the other with the same Cc pattern. _Participant pattern_ This is just like the To pattern except that it is compared with the addresses from the To header, the Cc header, and the From header instead of just the addresses from the To header. It's equivalent to having three different rules; one with a To pattern, another with the same Cc pattern, and another with the same From pattern. _AllText pattern_ This is similar to the header patterns. Instead of comparing with text in a particular header field it is compared with all of the text in the message header and body. If you enter non-ascii characters in this field then the search will be done using the character set you have defined with the Character-Set configuration variable. (The truly sophisticated may use an alternate character set for a search by entering the MIME encoding of the header string here.) _BodyText pattern_ Just like AllText, except it is compared only with the body of the message, not the body and header. If you enter non-ascii characters in this field then the search will be done using the character set you have defined with the Character-Set configuration variable. (The truly sophisticated may use an alternate character set for a search by entering the MIME encoding of the header string here.) _Age Interval_ The Age Interval, if defined, is part of the Pattern. If you use this, it should be set to something like: (min_age,max_age) where "min_age" and "max_age" are non-negative integers. The special value "INF" may be used for the max value. It represents infinity. In rare cases it may be useful to use the more general form of the value, which is a comma-separated list of intervals. It would look something like: (min_age1,max_age1),(min_age2,max_age2),... When there is an Age Interval defined, it is a match if the age, in days, of the message is contained in the interval. The interval includes both endpoints. If the option is set to a list of intervals then it is a match if the age of the message is contained in any of the intervals. Even though this option is called Age, it isn't actually the _age_ of the message. Instead, it is how many days ago the message arrived in one of your folders. If the current time is a little past midnight, then a message that arrived just before midnight arrived yesterday, even though the message is only a few minutes old. By default, the date being used is not the date in the Date header of the message. It is the date that the message arrived in one of your folders. When you Save a message from one folder to another that arrival date is preserved. If you would like to use the date in the Date header that is possible. Turn on the option _use-date-header-for-age_ near the bottom of the rule definition. A value of 0 is today, 1 is yesterday, 2 is the day before yesterday, and so on. The age interval (2,2) matches all messages that arrived on the day before yesterday. The interval (180,INF) matches all messages that arrived at least 180 days before today. The interval (0,1) matches all messages that arrived today or yesterday. _Score Interval_ The Score Interval, if defined, is part of the Pattern. If you use this, it should be set to something like: (min_score,max_score) where "min_score" and "max_score" are integers between -32000 and 32000. The special values "-INF" and "INF" can be used for the min and max values. These represent negative and positive infinity. Actually, the value may be a list of intervals rather than just a single interval if that is useful. The elements of the list are separated by commas like: (min_score1,max_score1),(min_score2,max_score2),... When there is a Score Interval defined, it is a match if the score for the message is contained in any of the intervals. The intervals include both endpoints. The score for a message is calculated by looking at every scoring rule defined and adding up the Score Values for the rules which match the message. _Keyword pattern_ A folder may have user-defined keywords. These are similar to the Important flag which the user may set using the Flag command. The difference is that the Important flag is always present for each folder. User-defined keywords are picked by the user. You may add new keywords by defining them in the Keywords option in the Setup/Config screen. After you have added a potential keyword with the Keywords option, the Flag command may be used to set or clear the keyword on individual messages. If you have given a keyword a nickname when configuring it, that nickname may be used instead of the actual keyword. When filling in a value for this field, it may be easiest to use the "T" command, which presents you with a list of the keywords you have defined to choose from. This part of the Pattern matches messages with certain keywords set. It will be considered a match if a message has any of the keywords in the list set. It is possible to add a _NOT_ to the Keyword Pattern meaning with the "!" "toggle NOT" command. This changes the meaning of the Keyword pattern so that it has the opposite meaning. It will be considered a match if none of the keywords in the list are set for a message. Don't make the mistake of putting the "!" in the data field for the pattern. For example, if you type the characters "!frizzle" into the Keyword pattern, the pattern will look like: Keyword pattern = !frizzle This means you want to match the 8 character sequence "!frizzle". In order to match messages which do not have the keyword "frizzle" set, first type the characters "frizzle" followed by carriage return for the value of the Keyword pattern, then negate it by typing the "!" command. It should end up looking like ! Keyword pattern = frizzle _Character Set pattern_ A message may use one or more character sets. This part of the Pattern matches messages which make use of certain specified character sets. It will be considered a match if a message uses any of the character sets in the list you give here. When filling in a value for this field, you may use the "T" command, which presents you with a large list of possible character sets to choose from. You may also just type in the name of a character set, and it need not be one that Pine knows about. Besides actual character set names (for example, ISO-8859-7, KOI8-R, or GB2312) you may also use some shorthand names that Pine provides. These names are more understandable shorthand names for sets of character set names. Two examples are "Cyrillic" and "Greek". Selecting one of these shorthand names is equivalent to selecting all of the character sets that make up the set. You can see all of these shorthand names and the lists of character sets they stand for by typing the "T" command. For the purposes of this Pattern, _Pine_ will search through a message for all of the text parts and collect the character sets declared for each part. It will also look in the Subject line for a character set used there. _Pine_ does not actually look at the text of the message or the text of the Subject to determine if a declared character set is actually used, it looks only at the declarations themselves in the MIME part headers and in the Subject. It is possible to add a _NOT_ to the Character Set Pattern meaning with the "!" "toggle NOT" command. This changes the meaning of the Character Set pattern so that it has the opposite meaning. It will be considered a match if none of the character sets in the list are used in a message. Don't make the mistake of putting the "!" in the data field for the pattern. For example, if you type the characters "!GB2312" into the Character Set pattern, the pattern will look like: Charset pattern = !GB2312 This means you want to match the 7 character sequence "!GB2312". In order to match messages which do not have the character set "GB2312" set, first type the characters "GB2312" followed by carriage return for the value of the Character Set pattern, then negate it by typing the "!" command. It should end up looking like ! Charset pattern = GB2312 A technicality: Since comma is the character used to separate multiple values in a pattern field, you have to escape comma with a backslash (\) if you want to include a literal comma in the field. In other words, if you type a backslash followed by a comma it will be interpreted as a comma by _Pine_, instead of as a separator between pattern values. All other backslashes are literal backslashes and should not be escaped. _Current Folder Type_ The Current Folder Type is part of the Pattern. It refers to the type of the currently open folder, which is the folder you were last looking at from the MESSAGE INDEX or MESSAGE TEXT screen. In order for a pattern to be considered a match, the current folder must be of the type you set here. The three types "Any", "News", and "Email" are all what you might think. If the Current Folder Type for a Pattern is set to "News", for example, then that will only be a match if the current folder is a newsgroup and the rest of the Pattern matches. The value "Specific" may be used when you want to limit the match to a specific folder (not just a specific type of folder), or to a list of specific folders. In order to match a specific folder you must Select the "Specific" button _AND_ you must fill in the name (or list of names) of the folder in the "Folder" field. If the current folder is any of the folders in the list, that is considered a match. The name of each folder in the list may be either "INBOX", the technical specification of the folder (like what appears in your configuration file) or, if the folder is one of your incoming folders, it may be the nickname you've given the folder. Here are a couple samples of specific folder names: {monet.art.example.com}mail/art-class {news.example.com/nntp}#news.comp.mail.pine The easiest way to fill in the "Folder" field is to use the T command which is available when the "Folder" line is hilighted. Note that you won't be able to edit the "Folder" line unless the Current Folder Type is set to "Specific", and any value that "Folder" has is ignored unless the type is set to "Specific". When reading a newsgroup, there may be a performance penalty incurred when collecting the information necessary to check a Pattern. For this reason, the default Current Folder Type is set to "Email". For example, a role with a non-Normal Index Line Color and a Current Folder Type of "Any" or "News" may cause the MESSAGE INDEX screen to draw more slowly when in a newsgroup. _Message Status Important_ This part of the Pattern may have one of three possible values. The default value is "Don't care", which matches any message. The other two values are "Yes", which means the message must be flagged "Important" in order to be a match; or "No", which means the message must _not_ be flagged "Important" in order to be considered a match. _Message Status New_ This part of the Pattern may have one of three possible values. The default value is "Don't care", which matches any message. The other two values are "Yes", which means the message must be "New" in order to be a match; or "No", which means the message must _not_ be "New" in order to be a match. "New" is the same as _Unseen_ and not "New" is the same as _Seen_. The nomenclature is a bit confusing. New means that the message is Unseen. It could have been in your mailbox for a long time but if you haven't looked at it, it is still considered New. That matches the default _Pine_ index display which shows an N for such a message. Recent means that the message was added to this folder since the last time you opened the folder. _Message Status Recent_ This part of the Pattern may have one of three possible values. The default value is "Don't care", which matches any message. The other two values are "Yes", which means the message must be "Recent" in order to be a match; or "No", which means the message must _not_ be "Recent" in order to be a match. "Recent" means that the message was added to the folder since the last time the folder was opened. If more than one mail client has the folder opened, the message will appear to be "Recent" to only one of the clients. The nomenclature is a bit confusing. New means that the message is Unseen. It could have been in your mailbox for a long time but if you haven't looked at it, it is still considered New. That matches the default _Pine_ index display which shows an N for such a message. Recent means that the message was added to this folder since the last time you opened the folder. _Message Status Deleted_ This part of the Pattern may have one of three possible values. The default value is "Don't care", which matches any message. The other two values are "Yes", which means the message must be marked "Deleted" in order to be a match; or "No", which means the message must _not_ be marked "Deleted" in order to be a match. If you are thinking of using this part of the Pattern as a way to prevent messages from being filtered more than once in a Filter Pattern, take a look at the Filter Option "move-only-if-not-deleted" instead. It should work better than using this field since it will hide the filtered messages even if they are already Deleted. _Message Status Answered_ This part of the Pattern may have one of three possible values. The default value is "Don't care", which matches any message. The other two values are "Yes", which means the message must be marked "Answered" in order to be a match; or "No", which means the message must _not_ be marked "Answered" in order to be a match. _Subject Contains Raw 8-bit_ This part of the Pattern may have one of three possible values. The default value is "Don't care", which matches any message. The other two values are "Yes", which means the Subject of the message must contain unencoded 8-bit characters (characters with the most significant bit set) in order to be a match; or "No", which means the Subject must _not_ contain unencoded 8-bit characters in order to be a match. _Beginning of Month_ This part of the Pattern may have one of three possible values. The default value is "Don't care", which matches any message. The other two values are "Yes", which means this is the first time _Pine_ has been run this month; or "No", which means this is _not_ the first time _Pine_ has been run this month. The way that _Pine_ decides if it is the beginning of the month or not is to compare today's date with the date stored in the Last-Time-Prune-Questioned variable in the config file. If the month of today's date is later than the month stored in the variable, then this is considered to be the first time you have run Pine this month, and that turns the Beginning of the Month option on. _Beginning of Year_ This part of the Pattern may have one of three possible values. The default value is "Don't care", which matches any message. The other two values are "Yes", which means this is the first time _Pine_ has been run this year; or "No", which means this is _not_ the first time _Pine_ has been run this year. The way that _Pine_ decides if it is the beginning of the year or not is to compare today's date with the date stored in the Last-Time-Prune-Questioned variable in the config file. If the year of today's date is later than the year stored in the variable, then this is considered to be the first time you have run Pine this year, and that turns the Beginning of the Year option on. _From or Reply-To in Address Book_ This part of the Pattern may have one of five possible values. The default value is "Don't care", which matches any message. The value "Yes, in any address book" means either the From address or the Reply-To address of the message must be in at least one of your address books in order to be a match. The value "No, not in any address book" means neither the From nor the Reply-To addresses may be in any of your address books in order to be a match. The values "Yes, in specific address books" and "No, not in any of specific address books" are similar but instead of depending on all address books you are allowed to give a list of address books to look in. Usually this would be a single address book but it may be a list of address books as well. For each of these "specific" address book options you Select which of the Specific options you want (Yes or No) _AND_ fill in the name (or list of names) of the address book in the "Abook List" field. The names to be used are those that appear in the ADDRESS BOOK LIST screen. The easiest way to fill in the Abook List field it to use the "T" command which is available when the "Abook List" line is highlighted. Note that you won't be able to edit the "Abook List" line unless the option is set to one of the two "Specific", values. _Categorizer Command_ This is a command that is run with its standard input set to the message being checked and its standard output discarded. The full directory path should be specified. The command will be run and then its exit status will be checked against the _Exit Status Interval_, which defaults to just the value zero. If the exit status of the command falls in the interval, it is considered a match, otherwise it is not a match. This option may actually be a list of commands. The first one that exists and is executable is used. That makes it possible to use the same configuration with Unix _Pine_ and _PC-Pine_. If none of the commands in the list exists and is executable then the rule is _not_ a match. If it is possible that the command may not exist, you should be careful to structure your rules so that nothing destructive happens when the command does not exist. For example, you might have a filter that filters away spam when there is a match but does nothing when there is not a match. That would continue to work correctly if the command didn't exist. However, if you have a filter which filters away spam when there is not a match and keeps it when there is a match, that would filter everything if the categorizer command didn't exist. The categorizer command is run and the result is the exit status of that command. If that exit status falls in the _Exit Status Interval_ then it is considered a match, otherwise it is not a match. Of course for the entire rule to match, it must also be checked against the other defined parts of the Pattern. The _Exit Status Interval_ defaults to the single value 0 (zero). If you define it, it should be set to something like: (min_exit_value,max_exit_value) where "min_exit_value" and "max_exit_value" are integers. The special values "INF" and "-INF" may be used for large positive and negative integers. Actually, a list of intervals may be used if you wish. A list would look like (min_exit_value1,max_exit_value1),(min_exit_value2,max_exit_value2),.. . When there is an _Exit Status Interval_ defined, it is a match if the exit status of the categorizer command is contained in any of the intervals. The intervals include both endpoints. The default interval is (0,0) and it matches only if the command exits with exit status equal to zero. It is also possible to set a _Character Limit_ for the categorizer command. Setting this option makes it possible to limit how much of the message is made available to the categorizer command as input. The default value (-1) means that the entire message is fed to the command. A value of 0 (zero) means that only the headers of the message are made available. A positive integer means that the headers plus that many characters from the body of the message are passed to the categorizer. Configuring News _Pine_ can access news folders in any one of three different ways: REMOTE NNTP Using the Network News Transport Protocol (NNTP) to access news on a remote news server. In this case the newsrc file is stored on the machine where _Pine_ is running. To specify a remote news-collection accessed via NNTP use the SETUP/collectionList screen's "Add" command. Set the Server: value to the NNTP server's hostname appended with the communication method "/service=NNTP", and set the Path: value to the "#news." namespace (without the quotes). Instead of specifying a news-collection, you may simply set the nntp-server option, which will cause _Pine_ to create a default news-collection for you. Another NNTP option which may be of interest is nntp-range. REMOTE IMAP Using the Internet Message Access Protocol (IMAP) to access news on a remote news server. In this case, your newsrc file is stored on the news server, in your home directory, so you must have an account on the news server, but you would be running _Pine_ on a different machine. The news server must be running an IMAPd server process. To specify a remote news-collection accessed via IMAP use the SETUP/collectionList screen's "Add" command. Set the Server: value to the IMAP server's hostname, and set the Path: value to the "#news." namespace (without the quotes). LOCAL Using local file access to the news database. In this case, your newsrc file is stored on the news server, in your home directory, so you must have an account on the news server, and you would be running _Pine_ on the same machine. To specify a local news-collection use the SETUP/collectionList screen's "Add" command. Leave the Server: value blank, and set the Path: value to the "#news." namespace (without the quotes). NOTE: Should no news-collection be defined as above, _Pine_ will automatically create one using the Setup/Config screen's "nntp-server" variable's value if defined. The collection will be created as a "Remote NNTP" as described above. If you are a _PC-Pine_ user, either option 1 (NNTP) or option 2 (IMAP) is possible. If you don't have an account on the news server, or if the news server is not running an IMAP daemon, then you must use NNTP. (If you are not sure, ask your service provider, university, or company for help.) In this case, your Unix .newsrc file can be transferred to your PC. A good place to put it would be in the same directory as your PINERC file, under the name NEWSRC, but you can specify a different location. Other configuration features related to news are Enable-8bit-Nntp-Posting. Compose-Sets-Newsgroup-Without-Confirm, News-Approximates-New-Status, News-Deletes-Across-Groups, News-Offers-Catchup-On-Close, News-Post-Without-Validation, News-Read-in-Newsrc-Order, and Quell-Extra-Post-Prompt. _________________________________________________________________ Notes on Configuration and Preferences Pine in Function Key Mode The standard _Pine_ uses alphabetic keys for most commands, and control keys in the composer. Despite possible appearances, the current bindings are the result of much discussion and thought. All the commands in the composer are single control characters. This keeps things very neat and simple for users. Two character commands in the composer are a possibility, but we're trying to avoid them because of the added complexity for the user. _Pine_ can also operate in a function-key mode. To go into this mode invoke _pine -k_ or (on some UNIX systems) _pinef._ On a UNIX system, you can link or copy the _Pine_ executable to _pinef_ to install _pinef._ Alternatively, users and systems administrators can set the _use-function-keys_ feature in the personal or system-wide _Pine_ configuration file. The command menus at the bottom of the screen will show _F1-F12 _instead of the alphabetic commands. In addition, the help screens will be written in terms of function keys and not alphabetic keys. One of the results of using _Pine_ in function-key mode is that users can only choose from twelve commands at any given time. In alphabetic-key mode, a user can press a key for a command (say, q to quit) and that command can be fulfilled. In function-key mode, the command must be visible on the bottom key-menu in order to be used. There are some screens where four screens of commands are operational; function-key users can get to all of them, just not all at once. _________________________________________________________________ Domain Settings _Pine_ uses the default domain for a few different tasks. First, it is tacked onto the user-id for outgoing email. Second, it is tacked onto all "local" (unqualified) addresses in the "To:" or "Cc:" fields of messages being composed (unless they are found in the address book or on an LDAP server). The domain name is also used to generate message-id lines for each outgoing message and to allow _Pine_ to check if an address is that of the current _Pine_ user. _Pine_ determines the domain name according to whichever of these it finds. The list here is in decreasing order of precedence. 1. Value of the variable user-domain in the system fixed configuration file 2. Value of the variable _user-domain_ in the personal configuration file 3. Value of the variable _user-domain_ in the system-wide configuration file 4. Value from an external database (DNS, /etc/hosts, NIS) as modified by a system fixed configuration file if use-only-domain-name set to _yes_ 5. Value from an external database (DNS, /etc/hosts, NIS) as modified by a personal configuration file if _use-only-domain-name_ set to _yes_ 6. Value from an external database (DNS, /etc/hosts, NIS) as modified by a system configuration file if _use-only-domain-name_ set to _yes_ 7. Unmodified value (host name) from an external database The easiest way for this system to work is for _PC-Pine_ users and UNIX _Pine_ system administrators to set the _user-domain_ variable. The variable _use-only-domain-name_ is helpful if your site supports/requires hostless addressing, but for some reason you don't want to use the _user-domain_ variable. _________________________________________________________________ Syntax for Collections In many environments, it is quite common to have collections of archived mail on various hosts around the network. Using the folder collections facility in _Pine_, access to these archives is just as simple as access to folders on _Pine_'s local disk. "Collection" is the word we use in _Pine_ to describe a set of folders. A collection corresponds loosely to a "directory" containing mail folders. Folders within a defined collection can be manipulated (opened, saved-to, etc) using just their simple name. Any number of folder collections can be defined, and _Pine_ will adjust its menus and prompts to help navigate them. The way collections are defined in _Pine_ is with the folder-collections variable in the _Pine_ configuration file. _Folder-collections_ takes a list of one or more collections, each (optionally) preceded by a user-defined logical name (label). Once collections are defined, _Pine_ adjusts its menus and behavior to allow choosing files by their simple name within the collection. Consider the following: folder-collections= Local-Mail C:\MAIL\[], Remote-Mail {imap.u.example.edu}mail/[] The example shows two collections defined (a comma separated list; newlines in the list are OK if there's one or more spaces before the next entry), one local and one remote. Each collection is a space-delimited pair of elements-first an optional logical-name and second the collection specifier. The logical-name can have spaces if it has quotes around it (but keeping the logical name short and descriptive works best). _Pine_ will use the logical-name (if provided) to reference all folders in the collection, so the user never has to see the ugliness of the collection specifier. The collection specifier can be thought of as an extended IMAP format (see the Remote Folders section for a description of IMAP format names). Basically, a pair of square-brackets are placed in the fully qualified IMAP path where the simple folder name (the part without the host name and path) would appear. Like IMAP, the path can be either fully qualified (i.e., with a leading '/') or relative to your home directory. An advanced feature of this notation is that a pattern within the square brackets allows the user to define a collection to be a subset of a directory. For example, a collection defined with the specifier: M-Mail C:MAIL/[m*] will provide a view in the folder lister of all folders in the PC's "C:MAIL" directory that start with the letter 'm' (case insensitive under DOS, of course). Further, the wildcard matching will honor characters trailing the '*' in the pattern. From within _Pine_, the "Folder List" display will be adjusted to allow browsing of the folders in any defined collection. Even more, you'll notice in the _Goto_ and _Save_ commands a pair of sub-commands to rotate through the list of logical collection names, so only a simple name need be input in order to operate on a folder in any collection. The first collection specified in the _folder-collections_ has special significance. That folder is the "default collection for saves". By default, in cases where the user does not specify which collection should be used to _Save_ a message, the default collection for saves will be used. Also, if the default-fcc is a relative file name, then it is relative to the default collection for saves. (See also saved-msg-name-rule. The notion of collections encompasses both email folders and news reading. The variable news-collections uses nearly the same format as _folder-collections_. Newsgroups can be defined for convenient access via either IMAP or NNTP. There are advantages and disadvantages to both access methods. In the IMAP case, your news environment state is maintained on the server and, thus, will be seen by any client. The downside is that, at the moment, you must have an account on the server. In the NNTP case, server access is mostly anonymous and no state/accounting need be maintained on it. The downside is that each client, for now, must individually maintain news environment state. An example pinerc entry might be: news-collections= Remote-State {news.u.example.edu}#news.[], Local-State {news.u.example.edu/nntp}#news.[] Only newsgroups to which you are subscribed are included in the collection. The pattern matching facility can be applied so as to define a news collection which is a subset of all the newsgroups you subscribe to. For example, this could be a valid collection: Newsfeed-News {news.u.example.edu/nntp}#news.[clari.* ] Collection handling is a tough problem to solve in a general way, and the explanation of the syntax is a bit ugly. The upside is, hopefully, that for a little complexity in the _Pine_ configuration file you get simple management of multiple folders in diverse locations. As of _Pine_ 4.00, collection setup is handled by the _Setup/collectionList_ screen instead of requiring hand editing of the configuration file. _________________________________________________________________ Syntax for Folder Names Remote folders are distinguished from local folders by a leading host name bracketed by '{' and '}'. The path and folder name immediately following the closing bracket, '}', is interpreted by the remote server and is in a form compatible with that server (i.e., path delimiters and naming syntax relative to that server). The full syntax for a _Pine_ folder name looks like [{}][#] The square brackets ([]) mean that the part is optional. If there is no remote-specification, then the folder name is interpreted locally on the computer running _Pine_. Local folder names depend on the operating system used by the computer running _Pine_, as well as the configuration of that system. For example, "C:\PINE\FOLDERS\OCT-94" might exist on a PC, and "~/mail/september-1994" might be a reasonable folder name on a system running Unix. _Pine_ users have the option of using folders which are stored on some other computer. _Pine_ accesses remote folders via IMAP (the Internet Message Access Protocol), or in the case of news, via NNTP (the Network News Transport Protocol). To be able to access remote folders in _Pine_, the remote host must be running the appropriate server software (imapd or nntpd) and you must correctly specify the name of the folder to _Pine_, including the domain name of the remote machine. For example, {monet.art.example.com}INBOX could be a remote folder specification, and so could {unixhost.art.example.com}~/mail/september-1994 and {winhost.art.example.com}\mymail\SEP-94 Note that in the case of remote folders, the directory/file path in the specification is determined by the operating system of the remote computer, _not_ by the operating system of the computer on which you are running _Pine_. As you can tell, the name of the computer is in {} brackets followed immediately by the name of the folder. (In each of these cases the optional namespace is missing.) If, as in these examples, there is no remote access protocol specified, then IMAP is assumed. Check Server Name Syntax for a more detailed look at what options can be placed between the brackets. If there are no brackets at all, then the folder name is interpreted locally on the computer on which you are running _Pine_. To the right of the brackets when a server name is present, or at the start of the foldername if no server is present, the sharp sign, "#", holds special meaning. It indicates a folder name outside the area reserved for your personal folders. In fact, it's used to indicate both the name of the folder, and a special phrase telling _Pine_ how to interpret the name that follows. So, for example, _Pine_ can be used to access a newsgroup that might be available on your computer using: #news.comp.mail.pine The sharp sign indicates the folder name is outside your personal folder area. The "news." phrase after it tells _Pine_ to interpret the remainder of the name as a newsgroup. Similarly, to access a newsgroup on your IMAP server, you might use something like: {wharhol.art.example.com}#news.comp.mail.misc There are a number of such special phrases (or "namespaces") available. For a more detailed explanation read about Namespaces. Note that "INBOX" has special meaning in both local and remote folder names. The name INBOX refers to your "principal incoming message folder" and will be mapped to the actual file name used for your INBOX on any given host. Therefore, a name like "{xxx.art.example.com}INBOX" refers to whatever file is used to store incoming mail for you on that particular host. _________________________________________________________________ Server Name Syntax This section describes the syntax which may be used for server names which may be associated with remote folders or SMTP servers. A server name is the hostname of the server. It's a good idea to use the host's fully-qualified network name. foo.example.com However, IP addresses are allowed if surrounded with square-brackets. [127.0.0.1] An optional network port number may be supplied by appending a colon (:) followed by the port number to the server name. By default, the IMAP port number, 143, is used. foo.example.com:port Besides server name and optional port number, various other optional parameters may be supplied that alter _Pine_'s interaction with the server. A parameter is supplied by appending a slash (/) character followed by the parameter's name and, depending on the particular parameter, the value assigned to that name, to the server name (and optional port number). Parameter names are _not_ case sensitive. Currently supported parameters include: User This parameter requires an associated value, and is intended to provide the username identifier with which to establish the server connection. If your SMTP server offers SMTP AUTH authentication, adding this parameter to the SMTP-Server option will cause _Pine_ to attempt to authenticate to the server using the supplied username. Similarly, if your NNTP server offers NNTP "AUTHINFO SASL" or "AUTHINFO USER" authentication, adding this parameter to the NNTP-Server option (or to the server name for any folder collection using NNTP) will cause _Pine_ to attempt to authenticate to the server using the supplied username. An example might be: /user=katie TLS Normally, when a new connection is made an attempt is made to negotiate a secure (encrypted) session using Transport Layer Security (TLS). If that fails then a non-encrypted connection will be attempted instead. This is a unary parameter indicating communication with the server must take place over a TLS connection. If the attempt to use TLS fails then this parameter will cause the connection to fail instead of falling back to an unsecure connection. /tls SSL This is a unary parameter indicating communication with the server should take place over a Secure Socket Layer connection. The server must support this method, and be prepared to accept connections on the appropriate port (993 by default). _Pine_ must be linked with an SSL library for this option to be operational. /ssl NoValidate-Cert Do not validate certificates (for TLS or SSL connections) from the server. This is needed if the server uses self-signed certificates or if _Pine_ cannot validate the certificate for some other known reason. Anonymous This is a unary parameter (that means it does not have a value) indicating that the connection be logged in as "anonymous" rather than a specific user. Not all servers offer anonymous access; those which do generally only offer read-only access to certain "public" folders. /anonymous Secure This is a unary parameter indicating that the connection use the most secure authentication method mutually supported by _Pine_ and the server. _Pine_ is capable of authenticating connections to the server using several methods. By default, _Pine_ will attempt each method until either a connection is established or the list of methods is exhausted. This parameter causes _Pine_ to instead fail the connection if the first (generally most "secure") method fails. /secure Submit This is a unary parameter for use with the "SMTP-Server" option. It indicates that the connection should be made to the Submit server (RFC 3676) (port 587) instead of the SMTP port (25). At the time this help was written the submit option was equivalent to specifying port 587. /submit or host:587 Debug This is a unary parameter indicating that the connection be established in a verbose mode. Basically, it causes _Pine_ to log the communication with the server in _Pine_'s debug file. Normally, the pine -d command-line flag would be used instead. NoRsh By default, _Pine_ attempts to login using "rsh", the UNIX remote shell program. Including "NoRsh" will cause connections to this server to skip the "rsh" attempt. This might be useful to avoid long timeouts caused by rsh firewalls, for example. Service This parameter requires an associated value. The default value is "IMAP" which indicates communication with the server based on the IMAP4rev1 protocol (defined in RFC 3501 -- see http://www.imap.org/docs/rfc3501.html). Other service values include: NNTP This value indicates communication with the server takes place via the Network News Transfer Protocol. Use this to define a collection of newsgroups on a remote news server. So /service=NNTP or just /NNTP is the way to specify NNTP access. POP3 This value indicates communication with the server takes place via the Post Office Protocol 3 protocol. /service=POP3 or just /POP3 Note that there are several important issues to consider when selecting this option: 1. POP3 provides access to only your INBOX. In other words, secondary folders such as your "saved-messages" are inaccessible. 2. _Pine_'s implementation of POP3 does not follow the traditional POP model and will leave your mail on the server. Refer to the Mail Drop functionality for a possible way around this problem. 3. See the discussion about new-mail checking in Folder-Reopen-Rule. Loser This is intended for use with defective servers that do not implement the protocol specification correctly. It should be used only as a last resort since it is likely that it will seriously degrade performance. Setting this parameter will cause _Pine_ to disable various protocol features and perform client-side workarounds instead. For example, it disables the IMAP SEARCH, SORT, and THREAD commands and does client-side searching, sorting, and threading instead. If set for the "SMTP-Server" option, it causes _Pine_ to not use the EHLO command and so not to attempt to use any SMTP extensions. The precise measures taken when "loser" is set depend on the protocol and are subject to change over time. /loser Note that it is possible to include more than one parameter in a server specification by concatenating the parameters. For example: foo.example.com:port/user=katie/novalidate-cert/debug _________________________________________________________________ Folder Namespaces A _Pine_ folder name looks like [{}][#][] The local part of a folder name has an optional "Namespace" which tells _Pine_ how to interpret the rest of the name. By default the folder name is interpreted as defining a section of your personal folder area. This area and how you specify it are defined by the server, if one is specified, or, typically, the home directory, if no server is defined. If a namespace is specified, it begins with the sharp, "#", character followed by the name of the namespace and then the namespace's path-element-delimiter. Aside from the path's format, namespaces can also imply access rights, content policy, audience, location, and, occasionally, access methods. Each server exports its own set (possibly of size one) of namespaces. Hence, it's likely communication with your server's administrator will be required for specific configurations. Some of the more common namespaces, however, include: #news. This specifies a set of folders in the newsgroup namespace. Newsgroup names are hierarchically defined with each level delimited by a period. #news.comp.mail.pine #public/ This specifies a folder area that the server may export to the general public. #shared/ This specifies a folder area that the folder may export to groups of users. #ftp/ This specifies a folder area that is the same as that it may have exported via the "File Transfer Protocol". #mh/ This specifies the personal folder area associated with folders and directories that were created using the MH message handling system. #move/ This namespace is interpreted locally by _Pine_. It has an unusual interpretation and format. #move The #move namespace is followed by two folder names separated by a delimiter character. The delimiter character may be any character which does not appear in the MailDropFolder name. The meaning of #move is that mail will be copied from the MailDropFolder to the DestinationFolder and then deleted (if possible) from the MailDropFolder. Periodic checks at frequency Mail-Check-Interval, but with a minimum time between checks set by MailDrop-Check-Minimum, are made for new mail arriving in the MailDropFolder. An example which copies mail from a POP inbox to a local folder follows #move+{popserver.example.com/pop3/ssl}inbox+local folder To you it appears that mail is being delivered to the local folder when it is copied from the MailDropFolder, and you read mail from the local folder. Note that if the DestinationFolder does not exist then the messages are not copied from the MailDropFolder. A #move folder may only be used as an Incoming folder or an Inbox. When you are in the FOLDER LIST of Incoming Message Folders (after turning on the enable-incoming-folders option) the Add command has a subcommand "Use Mail Drop" which may be helpful for defining the folder in your _Pine_ configuration. The same is true when you edit the Inbox-Path option in Setup/Config. Each of these configuration methods will also create the DestinationFolder if it doesn't already exist. If you are having problems, make sure the DestinationFolder exists. In addition, the server may support access to other user's folders, provided you have suitable permissions. Common methods use a prefix of either "~user/", or "/user/" to indicate the root of the other user's folder area. _________________________________________________________________ What is a Mail Drop? In some situaions it may make sense to have your mail delivered to one folder (the Mail Drop) and then when you want to read mail that has been delivered to the Mail Drop folder _Pine_ will move it to another destination folder. Often the Mail Drop will be a remote folder and messages will be moved from there to a local destination folder. One example where this might make sense is if the Mail Drop folder is accessible only with the POP protocol. You could designate your POP inbox as the Mail Drop folder and have _Pine_ move mail from there to a local (on the same machine _Pine_ is running on) destination folder, where you'll read it. A Mail Drop may only be used as your Inbox or as an Incoming folder. There is no attempt to synchronize the contents of the destination folder with the contents of the Mail Drop folder. All that happens is that all of the messages in the Mail Drop folder are copied to the destination folder and then they are deleted and expunged (if possible) from the Mail Drop folder. The next time a check for new mail is made, any messages in the Mail Drop folder are once again copied to the destination folder and deleted and expunged from the Mail Drop folder. (If the Mail Drop folder is a news group, then the messages can't be expunged from the newsgroup. Instead, only Recent messages are copied from the newsgroup to the destination folder.) Configuration of a Mail Drop is a little different from configuration of a folder which does not use a Mail Drop because you have to specify two folder names instead of one. The two folders may be any types of folders that _Pine_ can normally use. They don't have to be a remote folder and a local folder, that is simply the most common usage. When you use a Mail Drop folder _Pine_ will periodically re-open the Mail Drop to check for new mail. The new-mail checks will happen at the frequency set with the Mail-Check-Interval option, but with a minimum time (MailDrop-Check-Minimum) between checks. Because of this minimum you may notice that new mail does not appear promptly when you expect it. The reason for this is to protect the server from over-zealous opening and closing of the Mail Drop folder. If the user initiates the check by typing ^L (Ctrl-L) or the Next command when at the end of the folder index, then the check will happen, regardless of how long it has been since the previous check. If there is new mail, that mail will be copied to the destination folder and then will be deleted from the Mail Drop. Note that using a Mail Drop with a local destination folder does not make sense if you read mail from more than one machine, because the mail is downloaded to the destination folder (which is accessible from only one machine) and deleted from the Mail Drop. The feature Maildrops-Preserve-State modifies the operation of Mail Drops. The actual syntax used by _Pine_ for a folder that uses a Mail Drop is: #move The brackets are not literal. is a single character which does not appear in the MailDropFolder name. If the name doesn't contain spaces then it can be a space character. The two folder names are full technical folder names as used by _Pine_. Here are a couple examples to give you an idea what is being talked about: #move {popserver.example.com/pop3}inbox localfolder #move+{nntpserver.example.com/nntp}#news.comp.mail.pine+local folder A #move folder may only be used as an Incoming folder or an Inbox. When you are in the FOLDER LIST of Incoming Message Folders (after turning on the Enable-Incoming-Folders option) the Add command has a subcommand "Use Mail Drop" which may be helpful for defining the folder in your _Pine_ configuration. The same is true when you edit the Inbox-Path option in Setup/Config. if it doesn't already exist. If you are having problems, make sure the DestinationFolder exists. _________________________________________________________________ Sorting a Folder The mail index may be sorted by arrival, date, subject, from, size, score, to, or cc order. Each sort order can also be reversed. The _$_ command will prompt the user for the sort order. The sort order can also be specified on the command line with the _-sort_ flag or (equivalently) with the sort-key variable in the _pinerc_ file. When a user changes folders, the sort order will go back to the original sort order. The command line (_-sort_) or configuration file sort specification (_sort-key_) changes the original sort order. When a folder is sorted and new mail arrives in the folder it will be inserted in its properly sorted place. This can be a little odd when the folder is sorted by something like the subject. It can also be a little slow if you are viewing a large, sorted _INBOX_, since the _INBOX_ will have to be re-sorted whenever new mail arrives. The sorts are all independent of case and ignore leading or trailing white space. There are actually two forms of subject sort. One called _Subject_ and the other called _OrderedSubj_. They both ignore "Re:" at the beginning and "(fwd)" at the end of the subjects. _Subject_ sorts all the subjects alphabetically. _OrderedSubj_ sorts by subjects alphabetically, groups messages with the same subject (pseudo-threads), then sorts the groups by the date of the first message of the group. Sorting by _Thread_ was added after _OrderedSubj_ and is usually a better method. Thread sorting uses information in the message headers References, Message-ID, and Subject. It is possible the sort will be slightly slower with a Thread sort than with an OrderedSubj sort. The sort by sender sorts by the user-id (part before the "@"), not the full name. The arrival sort is no sort at all and the date sort depends on the format of the date. Some dates are in strange formats and are unparsable. The time zone is also taken into account. Sorting large mail folders can be very slow since it requires fetching all the headers of the mail messages. With UNIX _Pine_, only the first sort is slow since _Pine_ keeps a copy of all the headers. One exception is sorting in reverse arrival order. This is fast because no headers have to be examined. _Pine_ will show progress as it is sorting. _________________________________________________________________ Alternate Editor In the _Pine_ composer you can use any text editor, such as _vi_ or _emacs,_ for composing the message text. The addresses and subject still must be edited using the standard _Pine_ composer. If you include the feature enable-alternate-editor-cmd in your _pinerc_ you can type _^__ while in the body of the message in the composer and be prompted for the editor. If you also set the editor variable in your _pinerc_ then _^__ will invoke the configured editor when you type it. Turning on the feature enable-alternate-editor-implicitly will automatically invoke the editor you have defined with the _editor_ variable whenever you enter the body of a message you are composing. For example, when you move out of the last header line and into the body of the message, the alternate editor will be automatically invoked. We know that many people would like to use the alternate editor to edit the mail header as well. We considered several designs for this and didn't come up with one that we liked and that was easy to implement. One of the main problems is that you lose access to the address book. _________________________________________________________________ Signatures and Signature Placement If the file _~/.signature_ (UNIX) or _\PINE.SIG (PC) exists, it will be included in all outgoing messages. It is included before composition starts so that the user has a chance to edit it out if he or she likes. The file name for the signature can be changed by setting the signature-file variable in the _pinerc_. If the feature enable-sigdashes is turned on then the line consisting of the three characters "-- " is prepended to the signature file. When Replying or Forwarding a message different signatures my be automatically included by configuring them in the Roles setup screen. It's easy to include different signatures by hand, by having multiple signature files (_.sig1, .sig2, .sig3, etc_) and choosing to include (^R in the composer) the correct one for the message being sent. _Pine_'s default behavior encourages a user to put his or her contribution before the inclusion of the original text of the message being forwarded or replied to, This is contrary to some conventions, but makes the conversation more readable when a long original message is included in a reply for context. The reader doesn't have to scroll through the original text that he or she has probably already seen to find the new text. If the reader wishes to see the old message(s), the reader can scroll further into the message. Users who prefer to add their input at the end of a message should set the signature-at-bottom feature. The signature will then be appended to the end of the message after any included text. This feature applies when _Reply_ing, not when _Forward_ing. _________________________________________________________________ Feature List Variable _Pine_ used to have _feature levels_ for users with different amounts of experience. We found that this was too restrictive. _Pine_ now has a feature-list instead. Each user may pick and choose which features they would like enabled (simple to do in the _Setup/Config_ screen). There is a short description of each in Configuration Features. There is also a short on-line help explaining the effect of each of the features in the _Setup/Config_ screen. When the cursor is highlighting a feature, the _?_ command will show the help text for that feature. Features don't have values, they are just turned on or off. They are all off by default. The _feature-list_ variable is different from all other configuration variables in that its value is additive. That is, the system-wide configuration file can have some features turned on by default. The user can select other features in their personal configuration file and those features will be _added_ to the set of features turned on in the system-wide configuration file. (With all other configuration variables, the user's values _replace_ the system-wide values.) Likewise, additional features may be set on the command-line with the argument "-feature-list=". These will be added to the others. The treatment of _feature-list_ in the system-wide _fixed_ configuration file is also different from other variables. The system management can fix the value of individual features by placing them in the fixed configuration file. Users will not be able to alter those features, but will still be able to set the other non-restricted features the way they like. Because _feature-list_ is additive, there is a way to turn features off as well as on. Prepending the prefix "no-" to any feature sets it to off. This is useful for over-riding the system-wide default in the personal configuration file or for over-riding the system-wide default or the personal configuration value on the command line. For example, if the system-wide default configuration has the _quit-without-confirm_ feature set, the user can over-ride that (and turn it off) by including _no-quit-without-confirm_ in the personal configuration file or by giving the command line argument _-feature-list=no-quit-without-confirm._ More features (options) will no doubt continue to be added. _________________________________________________________________ Configuration Inheritance We start with an explanation of how configuration works in hopes of making it easier to describe how inheritance works. _Pine_ uses a hierarchy of configuration values from different locations. There are five ways in which each configuration option (configuration variable) can be set. In increasing order of precedence they are: 1. the system-wide configuration file. 2. the personal configuration file 3. the personal exceptions file 4. a command line argument 5. the system-wide _fixed_ configuration file (Unix _Pine_ only) The fixed configuration file is normally /usr/local/lib/pine.conf.fixed. The system-wide configuration file is normally /usr/local/lib/pine.conf for Unix _Pine_ and is normally not set for _PC-Pine_. For _PC-Pine_, if the environment variable _$PINECONF_ is set, that is used for the system-wide configuration. This location can be set or changed on the command line with the -P flag. The system-wide configuration file can be either a local file or a remote configuration folder. For Unix _Pine_, the personal configuration file is normally the file .pinerc in the user's home directory. This can be changed with the -p command line flag. For _PC-Pine_, the personal configuration file is in $PINERC or or ${HOME}\PINE\PINERC or \PINERC. This can be changed with the -p command line flag. If -p or $PINERC is used, the configuration data may be in a local file or a remote config folder. For Unix _Pine_, the personal exceptions configuration file is specified with the "-x exceptions_config" command line argument. "Exceptions_config" may be either a local file or a remote configuration folder. If there is no "-x" command line option, _Pine_ will look for the file ".pinercex" in the same local directory that the regular config file is located in. If the regular config file is remote then Unix _Pine_ looks in the home directory for ".pinercex". For _PC-Pine_, the personal exceptions configuration file is specified with the "-x exceptions_config" command line argument. If there is no "-x" command line argument the environment variable $PINERCEX may be set to the name of the "exceptions_config" instead. "Exceptions_config" may be either a local file or a remote configuration folder. If there is no "-x" command line option and $PINERCEX is not set, _PC-Pine_ will look for the file "PINERCEX" in the same local directory that the regular config file is located in. If the regular config file is remote then _PC-Pine_ looks in the local directory specified by the "-aux local_directory" command line argument, or the directory ${HOME}\PINE, or in for a file named "PINERCEX". To reiterate, the value of a configuration option is taken from the last location in the list above in which it is set. Or, thinking about it slightly differently, a default value for an option is established in the system-wide configuration file (or in the source code if there is no value in the system-wide file). That default remains in effect until and unless it is overridden by a value in a location further down the list, in which case a new "default" value is established. As we continue down the list of locations we either retain the value at each step or establish a new value. The value that is still set after going through the whole list of configuration locations is the one that is used. So, for example, if an option is set in the system-wide configuration file and in the personal configuration file, but is not set in the exceptions, on the command line, or in the fixed file; then the value from the personal configuration file is the one that is used. Or, if it is set in the system-wide config, in the personal config, not in the exceptions, but is set on the command line; then the value on the command line is used. Finally we get to inheritance. For configuration options which are lists, like "smtp-server" or "incoming-folders", the inheritance mechanism makes it possible to _combine_ the values from different locations instead of _replacing_ the value. This is true of all configuration lists other than the "feature-list", for which you may already set whatever you want at any configuration location (by using the "no-" prefix if necessary). To use inheritance, set the first item in a configuration list to the token "INHERIT". If the first item is "INHERIT", then instead of replacing the default value established so far, the rest of the list is appended to the default value established so far and that is the new value. Here is an example which may make it clearer. Suppose we have: System-wide config : smtp-server = smtp1.corp.com, smtp2.corp.com Personal config : smtp-server = INHERIT, mysmtp.home Exceptions config : smtp-server = Command line : smtp-server = Fixed config : smtp-server = This would result in an effective smtp-server option of smtp-server = smtp1.corp.com, smtp2.corp.com, mysmtp.home The "INHERIT" token can be used in any of the configuration files and the effect cascades. For example, if we change the above example to: System-wide config : smtp-server = smtp1.corp.com, smtp2.corp.com Personal config : smtp-server = INHERIT, mysmtp.home Exceptions config : smtp-server = INHERIT, yoursmtp.org Command line : smtp-server = Fixed config : smtp-server = This would result in: smtp-server = smtp1.corp.com, smtp2.corp.com, mysmtp.home, yoursmtp.org Unset variables are skipped over (the default value is carried forward) so that, for example: System-wide config : smtp-server = smtp1.corp.com, smtp2.corp.com Personal config : smtp-server = Exceptions config : smtp-server = INHERIT, yoursmtp.org Command line : smtp-server = Fixed config : smtp-server = produces: smtp-server = smtp1.corp.com, smtp2.corp.com, yoursmtp.org If any later configuration location has a value set (for a particular list option) which does _not_ begin with "INHERIT", then that value replaces whatever value has been defined up to that point. In other words, that cancels out any previous inheritance. System-wide config : smtp-server = smtp1.corp.com, smtp2.corp.com Personal config : smtp-server = INHERIT, mysmtp.org Exceptions config : smtp-server = yoursmtp.org Command line : smtp-server = Fixed config : smtp-server = results in: smtp-server = yoursmtp.org For some configuration options, like "viewer-hdr-colors" or "patterns-roles", it is difficult to insert the value "INHERIT" into the list of values for the option using the normal Setup tools. In other words, the color setting screen (for example) does not provide a way to input the text "INHERIT" as the first item in the viewer-hdr-colors option. The way to do this is to either edit the pinerc file directly and manually insert it, or turn on the "expose-hidden-config" feature and insert it using the Setup/Config screen. _________________________________________________________________ Using Environment Variables The values of _Pine_ configuration options may include environment variables which are replaced by the value of the variable at the time _Pine_ is run (and also at the time the config option is changed). The syntax to use environment variables is a subset of the common Unix shell dollar-syntax. For example, if $VAR appears in the value of a _Pine_ configuration option it is looked up in the environent (using getenv("VAR")) and its looked-up value replaces the $VAR part of the option value. To include a literal dollar sign you may precede the dollar sign with another dollar sign. In other words, if the text $$text is the value of a configuration option, it will be expanded to $text and no environment lookup will be done. For Unix _Pine_ it will also work to use a backslash character to escape the special meaning of the dollar sign, but $$ is preferable since it works for both _PC-Pine_ and Unix _Pine_, allowing the configuration option to be in a shared configuration file. This all sounds more complicated than it actually is. An example may make it clearer. Unfortunately, the way in which environment variables are set is OS-dependent and command shell-dependent. In some Unix command shells you may use PERSNAME="Fred Flintstone" export PERSNAME Now, if you use _Pine_'s Setup/Config screen to set personal-name=$PERSNAME the $PERSNAME would be replaced by Fred Flintstone so that this would be equivalent to personal-name=Fred Flintstone Note, environment variable substitution happens after configuration options which are lists are split into the separate elements of the list, so a single environment variable can't contain a list of values. The environment variable doesn't have to be the only thing after the equal sign. However, if the name of the variable is not at the end of the line or followed by a space (so that you can tell where the variable name ends), it must be enclosed in curly braces like ${VAR} It is always ok to use the braces even if you don't need to. It is also possible to set a default value for an environment variable. This default value will be used if the environment variable is not set (that is, if getenv("VAR") returns NULL). The syntax used to set a default value is ${VAR:-default value} If the config file contains personal-name=${VAR:-Fred Flintstone} then when _Pine_ is run VAR will be looked up in the environment. If VAR is found then personal-name will have the value that VAR was set to, otherwise, personal-name will be set to Fred Flintstone, the default value. An example where an environment variable might be useful is the variable inbox-path in the global configuration file. Suppose most users used the server imapserver.example.com but that there were some exceptions who used altimapserver.example.com In this case, the system manager might include the following line in the systemwide default _Pine_ configuration file inbox-path=${IMAPSERVER:-imapserver.example.com} For the exceptional users adding IMAPSERVER=altimapserver.example.com to their environment should work. Another example might be the case where a user has to use a different SMTP server from work and from home. The setup might be something as simple as smtp-server=$SMTP or perhaps a default value could be given. Note that, as mentioned above, the variable SMTP cannot contain a list of SMTP servers. _________________________________________________________________ SMTP Servers It is sometimes desirable to set smtp-server=localhost instead of setting sendmail-path to overcome the inability to negotiate ESMTP options when _sendmail_ is invoked with the _-t_ option. Sendmail can also be subject to unacceptable delays due to slow DNS lookups and other problems. It is sometimes desirable to configure an SMTP server on a port other than the default port 25. This may be used to provide an alternate service that is optimized for a particular environment or provides different features from the port 25 server. An example would be a program that negotiates ESMTP options and queues a message, but does not attempt to deliver messages. This would avoid delays frequently encountered when invoking _sendmail_ directly. A typical configuration would consist of * A program that implements the SMTP or ESMTP protocol via stdio. * An entry in /etc/services for the alternate service. * An entry in /etc/inetd.conf for the alternate service. * An entry in /usr/local/lib/pine.conf, /usr/local/lib/pine.conf.fixed or ~/.pinerc. _________________________________________________________________ MIME.Types file _Pine_'s MIME-TYPE support is based on code contributed by Hans Drexler <drexler@mpi.nl>. _Pine_ assigns MIME Content-Types according to file name extensions found in the system-wide files /usr/local/lib/mime.types and /etc/mime.types, and a user specific ~/.mime.types file. In DOS and OS/2, _Pine_ looks in the same directory as the PINERC file and the same dir as PINE.EXE. This is similar to the UNIX situation with personal config info coming before potentially shared config data. An alternate search path can be specified by setting the mimetype-search-path variable in the user or system-wide configuration or by setting the MIMETYPES environment variable. These files specify file extensions that will be connected to a mime type. Lines beginning with a '#' character are treated as comments and ignored. All other lines are treated as a mime type definition. The first word is a _type/subtype_ specification. All following words are file _extensions_ belonging to that type/subtype. Words are separated by whitespace characters. If a file extension occurs more than once, then the first definition determines the file type and subtype. A couple sample lines from a mime.types file follow: image/gif gif text/html html htm video/mpeg mpeg mpg mpe _________________________________________________________________ Color Details UNIX _Pine_ may display color if the terminal or terminal emulator you are using is capable of displaying colors. If the terminal supports ANSI color escape sequences you will be able to turn color on using the color-style option and setting it to the value _force-ansi-8color_ or _force-ansi-16color_. If instead you'd like _Pine_ to automatically detect whether or not you are on a color terminal, set _color-style_ to _use-termdef_ _and_ configure the termcap entry to describe your terminal's color capabilities. If the _color-style_ option is set to _use-termdef_, _Pine_ looks in the terminal capabilities database, TERMINFO or TERMCAP, depending on how _Pine_ was compiled, to decide whether or not your terminal is capable of color. For TERMINFO compiled _Pine_s, the capabilities that are used for color are "colors", "setaf", "setab", "op", and "bce". If you have a terminal with color capabilities described by the "scp" capability, _Pine_ does not support it. The capabilities "setf" and "setb" may be used instead of "setaf" and "setab". The capability "bce" is optional and is used as an optimization, the other capabilities are required. For TERMCAP compiled _Pine_s, the capabilities that are used for color are "Co", "AF", "AB", "op", and "ut". The capabilities "Sf" and "Sb" may be used instead of "AF" and "AB", though this isn't a useful feature. Here are some short descriptions of the capabilities listed above. The TERMINFO name is listed, followed by the TERMCAP name in parentheses. _colors_ (_Co_) The number of different colors. _setaf_ (_AF_) Set ANSI foreground color. _setab_ (_AB_) Set ANSI background color. _setf_ (_Sf_) Set foreground color. Alternate form of _setaf_. _setb_ (_Sb_) Set background color. Alternate form of _setab_. _op_ (_op_) Set default pair to its original value. _bce_ (_ut_) Screen is erased with current background color instead of default background. A standard ANSI terminal which supports color will have a TERMINFO entry which contains: colors#8 setaf=\E[3%p1%dm setab=\E[4%p1%dm op=\E[39;49m bce or the TERMCAP equivalent: Co#8 AF=\E[3%dm AB=\E[4%dm op=\E[39;49m ut If there are eight colors, the program uses colors 0, 1, ..., 7. For an ANSI terminal, the foreground color is set by sending the escape sequence "Escape LeftBracket 3 color_number m" to the terminal. The background color is set by sending the sequence "Escape LeftBracket 4 color_number m". ANSI colors zero through seven are defined to be "black", "red", "green", "yellow", "blue", "magenta", "cyan", and "white". Some terminal emulators will swap blue and red and swap yellow and cyan. The capabilities "setf" and "setb" are usually designed for those terminals so that they will flip the color numbers 1 and 4 and the numbers 3 and 6 to compensate for this. _Pine_ will use the ANSI versions of the capabilities if they exist, and will use the non-ANSI versions (setf and setb) if the ANSI versions don't exist. Here's a version which does the flipping. This can only be used with TERMINFO _Pine_s, because of the arithmetic, which is not supported by TERMCAP. colors#8 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m op=\E[39;49m bce Some terminal emulators are capable of displaying eight more colors when the foreground colors 30-37 are replaced with 90-97 and the background colors 40-47 are replaced with 100-107. These terminals require a fancy termcap entry which can take foreground colors 0, 1, ..., 15 and map that into 30, 31, ..., 37, 90, 91, ..., 97, and similarly for the background colors. Here is a terminfo entry which will do just that: colors#16 setaf=%p1%{8}%/%{6}%*%{3}%+\E[%d%p1%{8}%m%dm setab=%p1%{8}%/%{6}%*%{4}%+\E[%d%p1%{8}%m%dm op=\E[39;49m bce and here is the termcap equivalent: Co#16 AF=\E[%i%i%>\001\034%>\045\064%dm AB=\E[%i%i%>\001\046%>\057\064%dm op=\E[39;49m ut This is a terminfo entry for 16 colors that also does the color flipping: colors#16 setf=%p1%{8}%/%{6}%*%{3}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga% {4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m setb=%p1%{8}%/%{6}%*%{4}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga% {4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m op=\E[39;49m bce If you are always using the same display it probably won't matter to you if the color pairs red/blue and cyan/yellow are flipped, since you'll always be seeing them flipped. You will get different defaults than on a display with them not flipped, but that's about all. If you are trying to use the same pinerc file from displays with different color characteristics, or from _Pine_ and _PC-Pine_, you will have to be more careful. The colors numbered 0 through 7 may be used portably between different systems if you are careful to make them correspond to the ANSI order mentioned above. You can check this by looking at a color configuration screen for one of the colors. The first eight colors should be in the order above. If they aren't, you could fix that by modifying your termcap entry on the UNIX system. This is not possible if your system uses TERMCAP instead of TERMINFO. _________________________________________________________________ Additional Notes on PC-Pine Below are a few odds and ends worth mentioning about _PC-Pine_. They have to do with DOS-specific behavior that is either necessary or useful (and sometimes both!). As _PC-Pine_ runs in an environment with limited access control, accounting or auditing, an additional line is automatically inserted into the header of mail messages generated by _PC-Pine_: X-Sender: @ By popular demand of system administrators, _PC-Pine_ has been modified to prevent sending messages until the user has successfully logged into a remote mail server. Even though _PC-Pine_ cannot prevent users from changing the apparent identity of the sender of a message, the IMAP server login name and host name included in the _X-Sender_ line provide some level of traceability by the recipient. However, this should not be considered a rigorous form of authentication. It is extremely lightweight, and is not a replacement for true authentication. Hand in hand with authentication and accounting is user information. Since _PC-Pine_ has no user database to consult for _user-id_, _personal-name_, etc., necessary information must be provided by the user/installer before _PC-Pine_ can properly construct the "From" address required for outbound messages. _PC-Pine_ will, by default, prompt for the requisite pieces as they are needed. This information corresponds to the _PINERC_ variables user-id, personal-name, user-domain, and smtp-server. The user is then asked whether or not this information should automatically be saved to the _PINERC_. This is useful behavior in general, but can lead to problems in a lab or other shared environment. Hence, these prompts and automatic saving of configuration can be turned off on an entry by entry basis by setting any of the above values in the _PINERC_ to the null string (i.e., a pair of double quotes). This means that the user will be prompted for the information once during each _Pine_ session, and no opportunity to save them in the _PINERC_ will be offered. Along similar lines, a feature allowing automatic login to the imap-server containing the user's _INBOX_ has also been requested. This feature is not enabled by default, but requires the existence of the file named _PINE.PWD_ in the same directory as the _PINERC_. Even with the existence of this file, the user must still acknowledge a prompt before the password is saved to the file. If _PC-Pine_ is configured to access several different IMAP servers, each password entered will be kept (associated with the corresponding host name) in memory during the current session, and optionally, in the _PINE.PWD_ file for use in subsequent sessions. _WARNING_! Use this feature with caution! It effectively makes the user's mail no more secure than the physical security of the machine running _PC-Pine_. What's more, while the password is cloaked by a mild (some might say, feeble) encryption scheme, it is nonetheless sitting in a file on the PC's disk and subject to cracking by anyone with access to it. _BEWARE_! Another feature of DOS is the lack of standard scratch area for temporary files. During the course of a session, _PC-Pine_ may require numerous temporary files (large message texts, various caches, etc.). Where to create them can be a problem, particularly when running under certain network operating systems. _PC-Pine_ observes the _TMPDIR_, _TMP_, and _TEMP_ environment variables, and creates temporary files in the directory specified by either. In their absence, _PC-Pine_ creates these files in the root of the current working drive. Some temporary files have to be created in the same directory as the file they are a temporary copy of. For example, a pinerc file or a address book file. Behind the Scenes Many people ask how certain _Pine_ features are implemented. This section outlines some of the details. Address Books Beginning with _Pine_ 4.00 there are two types of address book storage. There are _local_ address books, which are the address books that are stored in a local file (the address books _Pine_ has had all along); and there are _remote_ address books, which are stored on an IMAP server. Information About Remote Address Books NOTE: The remote address book capability does not allow you to access an existing local address book from a remote system! That is, you can't set the remote address book to something like {remote.host}.addressbook and expect to access the existing .addressbook _file_ on remote.host. Instead, you need to create a new remote address book in a new, previously unused remote mail _folder_. Then you can use the _Select_ and _Apply Save_ commands in the address book screen to _Save_ all of the entries from an existing local address book to the new remote address book. Beginning with _Pine_ 4.00 there is a new type of address book called a remote address book. A remote address book is stored in a mail folder on an IMAP server. A _Pine_ remote address book is just like a _Pine_ local address book in that it is not interoperable with other email clients. The folder is a regular folder containing mail messages but those messages are special. The first message must be a pine remote address book header message which contains the header _x-pine-addrbook_. The last message in the folder contains the address book data. In between the first and the last message are old versions of the address book data. The address book data is simply stored in the message as it would be on disk, with no MIME encoding. When it is used the data from the last message in the folder is copied to a local file and then that file is used exactly like a local address book file is used. When a change is made the modified local file is appended to the remote folder in a new message. In other words, the local file is just a cache copy of the data in the remote folder. Each client which uses the remote address book will have its own cache copy of the data. Whenever a copy is done the entire address book is copied, not just the entries which have changed. _Pine_ can tell that the remote data has changed by one of several methods. If the date contained in the Date header of the last message has changed then it knows it has changed. If the UID of the last message has changed, or the number of messages in the folder has changed, it knows that it has changed. When _Pine_ discovers the folder has changed it gets a new copy and puts it in the local cache file. There is a new configuration file variable for remote address books called remote-abook-metafile. The variable is the name of a file in which information about remote address books is stored. There is one line in the metafile for each remote address book. The information stored there is the name of the cache file and information to help figure out when the remote folder has changed. If the metafile or any of the cache files is deleted then _Pine_ will rebuild them the next time it runs. Remote address books have names that look just like regular remote mail folder names. For example: {host.domain}foldername _Pine_ decides whether or not an address book is remote simply by looking at the first character of the address book name and comparing it to '_{_'. Information About All Address Books The address book is named, by default, .addressbook in the user's Unix home directory, or in the case of _PC-Pine_, ADDRBOOK, in the same directory as the PINERC file. There may be more than one address book, and the default name can be overridden via an entry in any of the _Pine_ configuration files. The two configuration variables address-book and global-address-book are used to specify the names of the address books. Each of these variables is a list variable. The total set of address books for a user is the combination of all the address books specified in these two lists. Each entry in the list is an optional nickname followed by an address book name. The nickname is everything up to the last space before the file name. The _global-address-book_ list will typically be configured in the system-wide configuration file, though a user may override it like most other variables. Address books which are listed in the _global-address-book_ variable are forced read-only, and are typically shared among multiple users. Local address books (or local cache files for remote address books) are simple text files with lines in the format: TABTAB
TABTAB The last two fields are optional. A "line" may be made up of multiple actual lines in the file by using continuation lines, which are lines beginning with SPACE characters. The line breaks may be after TABs or in between addresses in a distribution list. Each _actual_ line in the file must be less than 1000 characters in length. Nicknames (the first field) are short names that the user types instead of typing in the full address. There are several characters which aren't allowed in nicknames in order to avoid ambiguity when parsing the address (SPACE, COMMA, @, ", ;, :, (, ), [, ], <, >, \). Nicknames aren't required. In fact, none of the fields is required. The _fullname_ field is usually stored as Last_name, First_name, in order that a sort on the fullname field comes out sorted by Last_name. If there is an unquoted comma in the fullname, _Pine_ will flip the first and last name around and get rid of the comma when using the entry in a composition. It isn't required that there be a comma, that's only useful if the user wants the entries to sort on last names. The _address_ field takes one of two forms, depending on whether the entry is a single (simple) address or a distribution list. For a simple entry, the address field is an RFC 822 address. This could be either the email-address part of the address, i.e., the part that goes inside the brackets (<>), or it could be a full RFC 822 address. The phrase part of the address (the fullname) is used unless there is a fullname present in the fullname field of the address book entry. In that case, the fullname of the address book entry replaces the fullname of the address. For a distribution list, the
is in the format: "("
,
,
, ... ")" The only purpose for the parentheses around the list of addresses is to make it easier for the parsing routines to tell that it is a simple entry instead of a list. The two are displayed differently and treated slightly differently in some cases, though most of the distinction has disappeared. Each of the addresses in a list can be a full RFC 822 address with fullname included, or it may be just the simple email-address part of the address. This allows the user to have a list which includes the fullnames of all the list members. In both the simple and list cases, addresses may also be other nicknames which appear in this address book or in one of the other address books. (Those nicknames are searched for by looking through the address books in the order they appear in the address book screen, with the first match winning.) Lists may be nested. If addresses refer to each other in a loop (for example, list A includes list B which includes list A again) this is detected and flagged. In that case, the address will be changed to "**** address loop ****". The optional _fcc_ field is a folder name, just like the fcc field in the composer headers. If the first address in the To field of a composition comes from an address book entry with an fcc field, then that fcc is placed in the fcc header in the composer. The _comments_ field is just a free text field for storing comments about an entry. By default, neither the fcc nor the comments field is shown on the screen in the address book screen. You may make those fields visible by configuring the variable addressbook-formats. They are also searched when you use the _WhereIs_ command in the address book screen and are visible when you _View_ or _Update_ an entry. The address book is displayed in the order that it is stored. When the user chooses a different sorting criterion, the data is actually sorted and stored, as opposed to showing a sorted view of the data. When the address book is written out, it is first written to a temporary file and if that write is successful it is renamed. This guards against errors writing the file that might destroy the whole address book. The address book is re-written after each change. If the address book is a remote address book, the file is then appended to the remote mail folder using IMAP. The end-of-line character(s) in the address book file are those native to the system writing it. So it is on Unix and on PC's. However, both Unix and PC versions of _Pine_ can read either format, so it should be possible to share a read-only address book among the two populations (using NFS, for example). The end-of-line character for the LookUp file is always just , even on a PC. _________________________________________________________________ Address Book Lookup File Starting in 3.90 there is an additional file for each address book, called the LookUp file. It usually has the same name as the address book file with the suffix ".lu" appended. (It might have a different name if a file name length restriction prohibited that name.) This file is created and maintained by _Pine_. If it is deleted, _Pine_ will recreate it next time it runs. Its purpose is to speed up lookups for large address books and to reduce memory requirements for large address books. A fairly detailed description of how it is used is given in src/pine/adrbklib.h. The lookup file changes whenever the address book itself is changed. If it doesn't exist, _Pine_ attempts to create it. If _Pine_ doesn't have permission to create the lookup file with the standard name, it will create a temporary version in a temp directory. You want to avoid this since it would have to be rebuilt every time _Pine_ was run, and rebuilding takes a significant time for a large address book. So, if you're going to have a shared address book in a read-only directory, it is highly desirable to create the lookup file so that the users sharing it won't have to each create a copy in a temp directory. You can do that by running _Pine_ and accessing the address book under a user id which does have permission to write the file or by using the _-create_lu_ command line argument to _Pine_. If users may be using a shared address book that needs updating, it is best to _move_ the old address book to another name rather than copying over it since the file may be opened by running _Pine_s. It is also best to make the lookup file for the new addrbook before moving it and the address book file into place, otherwise users may get stuck attempting to initialize the new lookup file. The lookup file contains a timestamp which records the mtime of the address book file when the lookup file was last updated. Whenever a user runs _Pine_ the current mtime of the address book is checked against this timestamp and if they differ, _Pine_ will want to rebuild the lookup file. Because of this, it isn't a good idea to build the lookup file and then _copy_ the address book and lookup file into place. You should move it or copy it in some way which preserves the address book file's mtime (e.g., use _mv_ or _tar_). Validity Checking of Address Books There is no file locking done on _Pine_ address books, however, there is considerable validity checking done to make sure that the address book hasn't changed unexpectedly. Whenever the address book is about to be changed, a check is made to see if the file is newer than when we read it or the remote address book folder has changed since we last copied it. If either of these is true, the change is aborted. There is an automatic, behind-the-scene check that happens every so often, also. For example, if someone else changes one of the address books that you have configured, your _Pine_'s copy of the address book will usually be updated automatically without you noticing. This checking happens at the same time as new mail checking takes place, unless you are actively using the address book, in which case it happens more frequently. Another sort of validity check is that the lookup file contains a timestamp internally that is supposed to match the time that the address book file itself was last modified. If the lookup file timestamp doesn't match the date of the address book file, a new lookup file is built. If you are having trouble, it is always ok to remove the lookup file and restart. _Pine_ will automatically rebuild the lookup file. One other validity check happens when looking up an entry in the address book file. An entry is looked up by first getting an offset into the address book file from the lookup file. A seek to that location is done and then the entry is read. An entry should be at the start of a line. If it isn't, something is wrong. In that case, the lookup file is rebuilt and the operation is repeated if possible. _________________________________________________________________ Remote Configuration Beginning with _Pine_ 4.30, configuration information may be stored remotely. Remote configuration information is stored in a folder on an IMAP server. This should be a folder which is used only for storing the configuration information. In other words, it should be a folder which didn't exist before. Remote configuration folders are very similar to remote address book folders. They both consist of a header message, which serves to identify the type of folder; the last message, which contains the data; and intermediate messages, which contain old versions of the data. The first message must contain the header _x-pine-pinerc_. When a remote configuration is being used, the folder is checked to make sure it is a remote configuration folder, then the data contained in the last message is copied to a temporary file. That file is treated just like any regular local configuration file from that point on. Whenever a configuration change is made, the entire file is copied back to the IMAP server and is appended to the folder as a new message. Because remote configuration folders are so similar to remote address books, the configuration variable remote-abook-metafile is used by both. Remote configuration folders have names that look just like regular remote mail folder names. For example: {host.domain}mypinerc _Pine_ decides whether or not a configuration file is remote simply by looking at the first character of the name and comparing it to '_{_'. _________________________________________________________________ Checkpointing Periodically _Pine_ will save the whole mail folder to disk to prevent loss of any mail or mail status in the case that it gets interrupted, disconnected, or crashes. The period of time _Pine_ waits to do the checkpoint is calculated to be minimally intrusive. The timing can be changed (but usually isn't) at compile time. Folder checkpointing happens for both local folders and those being accessed with IMAP. The delays are divided into three categories: Good Time: This occurs when _Pine_ has been idle for more than 30 seconds. In this case _Pine_ will checkpoint if 12 changes to the file have been made or at least one change has been made and a checkpoint hasn't been done for five minutes. Bad Time: This occurs just after _Pine_ has executed some command. _Pine_ will checkpoint if there are 36 outstanding changes to the mail file or at least one change and no checkpoint for ten minutes. Very Bad Time: Done when composing a message. In this case, _Pine_ will only checkpoint if at least 48 changes have been made or at least one change has been made in the last twenty minutes with no checkpoint. _________________________________________________________________ Debug Files If Unix _Pine_ is compiled with the compiler _DEBUG_ option on (the default), then _Pine_ will produce debugging output to a file. The file is normally .pine-debugX in the user's home directory where _X_ goes from 1 to 4. Number 1 is always the most recent session and 4 the oldest. Four are saved because often the user has gone in and out of _Pine_ a few times after a problem has occurred before the expert actually gets to look at it. The amount of output in the debug files varies with the debug level set when _Pine_ is compiled and/or as a command line flag. The default is level 2. This shows very general things and records errors. Level 9 produces copious amounts of output for each keystroke. _PC-Pine_ creates a single debug file named PINEDEBG.TXT in the same directory as the PINERC file. _________________________________________________________________ Filters _Pine_ is not designed to process email messages as they are delivered; rather _Pine_ depends on the fact that some other program (sendmail, etc) will deliver messages and _Pine_ simply reads the email folders which that other program creates. For this reason, _Pine_ cannot filter incoming email into different folders. It can, however, work alongside most of the programs available over the Internet which perform this task. _Pine_ is known to operate successfully with the _Elm_ _filter_ program and with _procmail_. _Pine_ allows users to specify a set of incoming-folders. _Pine_ will separate out all the folders listed as _incoming-folders_ and offer convenient access to these. We hope that in the future _Pine_ will be able to offer new message counts for all of the incoming folders, but we haven't done this so far because of the performance penalty. _________________________________________________________________ Folder Formats and Name Extensions A folder is a group of messages. The default format used by Unix _Pine_ is the Berkeley mail format. It is also used by the standard _mail_ command and by _elm._ Unix _Pine_ also understands message folders in other formats, such as Tenex, MH, MMDF, and Netnews. _PC-Pine_ reads and writes local (PC) folders in a special format similar to the Tenex format. Near as we can tell, _PC-Pine_ is the only program to use this format. Beginning with version 3.90, _PC-Pine_ includes a ReadOnly driver for the Berkeley mailbox format in addition. That means that you can import Unix mail folders, or mount them via NFS or SMB, and _PC-Pine_ can read them --but not modify them. Extensions. In the past, file name extensions have been significant in both Unix _Pine_ and _PC-Pine_, but this has caused more problems than it solved. Therefore, on Unix _Pine_ extensions no longer have any special meaning, and this is the trend for _PC-Pine_ as well. By default, _PC-Pine_ adds ".MTX" to the name of any local (PC) folders that are referenced, and suppresses the extension from the "Folder List" display. Now that _PC-Pine_ can read more than one folder format, the MTX extension no longer implies a particular format, and is largely irrelevant. By using the folder_extension option, you can change this behavior. In particular, you may set _folder-extension_ to the "null string" (a pair of double quotes) which tells _PC-Pine_ to neither add nor hide-from-view _any_ folder name extension. The reason you might wish to over-ride the MTX default is that recent versions of _PC-Pine_ have the ability to open (albeit ReadOnly) normal Unix mail folders. Since it might be inconvenient to rename all of them to have an MTX extension, it is possible with this option to switch _PC-Pine_'s behavior so that such folders can be seen and accessed without changing their names. However, doing this means that your existing _PC-Pine_ local folders will have apparently changed their names. For example, if you had a local folder named "FOO" it will now appear in the "Folder List" as "FOO.MTX". If you wish to save additional messages to that folder, you will need to enter the full name, "FOO.MTX" at the _Save_ prompt. Likewise for _GoTo_. If you wish to permanently avoid having to deal with folder name extensions, you will need to set this option to the null string by entering two double- quote marks, and you will need to rename your existing local folders to not have an MTX extension. In DOS this can be done in one command, once you have changed to your mail directory: RENAME *.MTX *. We don't know why you might wish to, but you could also use this option to tell _PC-Pine_ to use an extension other than MTX. In this case, enter the three characters you desire to use in lieu of "MTX". Note that your existing folders will need to be renamed to correspond to this new extension. Berkeley Mail Format This format comes to us from the ancient UNIX mail program, _/bin/mail._ (Note that this doesn't have anything to do with Berkeley, but we call it the Berkeley mail file format anyway.) This program was actually used to interactively read mail at one time, and is still used on many systems as the local delivery agent. In the Berkeley mail format, a folder is a simple text file. Each message (including the first) must start with a separator line which takes approximately the form: From juser@u.example.edu Wed Aug 11 14:32:33 1993 Each message ends with two blank lines. There are actually several different variations in the date part of the string, twenty at last count. Because of the format of the separators, lines in the mail message beginning with "From ", space included, risk being confused as message separator lines. Some mail programs will interpret any line beginning with "From " as a message separator, while others --including _Pine_-- will not be confused unless the line really looks like a message separator, complete with address and date. Such lines will be modified to begin with ">From ". In deference to other mail programs, you may also set the save-will-quote-leading-froms feature, in which case any line beginning with "From " will be modified as above. If you see this occasionally in incoming mail messages, the culprit is not _Pine_ but the message delivery program being used at your site. You can fool _Pine_ into thinking a file is a mail folder by copying a suitable message separator from a real folder to the beginning of the file and wherever you want message boundaries. The vast majority of _INBOX_es _Pine_ reads and folders it writes are of this format. Tenex and MTX Formats Like the Berkeley format, the Tenex folder format uses a single file per folder. Historically, the name of Tenex-format folders ended with _.txt_, but this rule is no longer enforced. The file format consists of a header line followed by the message text for each message. The header is in one of two forms: dd-mmm-yy hh:mm:ss-zzz,n;ffffffffffff dd-mmm-yyyy hh:mm:ss sssss,n;ffffffffffff and is immediately followed by a newline (and the message text). The fields in the formats are: dd two-digit day of month (leading space if a single-digit day) mmm three-letter English month name (Jan, Feb, etc.) yy two-digit year in 20th century (obsolete) yyyy four-digit year hh two-digit hour in 24-hour clock (leading zero if single-digit) mm two-digit minute (leading zero) ss two-digit second (leading zero) zzz three-letter North American time zone (obsolete) sssss signed four-digit international time zone as in RFC 822 n one or more digits of the size of the following message in bytes ffffffffffff twelve-digit octal flags value Punctuation is as given above. The time in the header is the time that message was written to the folder. The flags are interpreted as follows: the high order 30 bits are used to indicate user flags, the next two bits are reserved for future usage, the low four bits are used for system flags (010 = answered, 04 = flagged urgent, 02 = deleted, 01 = seen). If a Tenex-format (or empty) file named _mail.txt_ exists in a _Pine_ user's home directory, this triggers special processing in _Pine_. When _INBOX_ is opened, mail is automatically moved from _/usr/spool/mail_ into _mail.txt_ in the user's home directory. The format used by _PC-Pine_ is identical to the Tenex format, with two exceptions: the folder name ends with _.MTX_ instead of _.txt_ (this is a requirement in the MTX format), and DOS-style CR/LF newlines are used instead of UNIX-style LF newlines. Netnews Format The netnews format is a ReadOnly format which uses directories under /usr/spool/news as folders. The /usr/spool/news/ prefix is removed and all subsequent ``/'' (slash) characters are changed to ``.'' (period). For example, the netnews folder name _comp.mail.misc_ refers to the directory name /usr/spool/news/comp/mail/misc. In addition, the news folder name must appear in the file /usr/lib/news/active for it to be recognized. Individual messages are stored as files in that directory, with file names being the ASCII form of a number assigned to that message. The default locations above can be changed with the config variables news-spool-directory and news-active-file-path. _________________________________________________________________ Folder Locking There are two kinds of locking which _Pine_ has to worry about. The first might be called program-contention locking. This affects the times when a program is performing actual updates on a folder. An update might be a message delivery program appending a message (_sendmail_ delivering a message to an _INBOX_), status changes (checkpoints by _Pine_ every few minutes) or deletion of messages (an expunge in _Pine_). For moderate sized mail messages, these operations should not last for more than a few seconds. The second kind of locking has to do with user-contention situations. This would be the case when one folder is shared by a group of people or even when one person starts multiple email sessions all of which access the same folders and _INBOX_. There are two standard locking mechanisms which handle program-contention locking. To be on the safe side, _Pine_ implements both of them. The older mechanism places a file _xxxx.lock_ (where _xxxx_ is the name of the file being locked) in the same directory as the file being locked. This makes use of the fact that directory operations are atomic in UNIX and mostly works across NFS. There are involved algorithms used to determine if a lock has been held for an excessive amount of time and should be broken. The second program-contention locking mechanism uses the _flock()_ system call on the mailbox. This is much more efficient and the locks can't get stuck because they go away when the process that created them dies. This is usually found on 4BSD and related machines. In addition to these, _Pine_--through the c-client library--provides robust locking which prevents several users (or several instances of the same user) having a mail file open (for update) at once. This user-contention lock is held the entire time that the folder is in use. With IMAPd 7.3(63) and _Pine_ 3.84 and higher, the second _Pine_ session which attempts to open a particular folder (usually _INBOX_) with _Pine_ will ``win''. That is to say, the second session will have read/write access to the folder. The first user's folder will become read-only. (Note that this is exactly the opposite of the behavior prior to _Pine_ 3.84 where the second open was read-only. Having the latest open be read-write seems to match more closely with what users would like to have happen in this situation.) _Pine_'s additional locking is only effective against multiple uses of _Pine_ or other programs using the c-client library, such as _MailManager, ms, IMAPd _and a few others. Beginning with _Pine_ 3.85, there is a _-o_ command line flag to intentionally open a mailbox read-only. _Pine_ locking on UNIX systems works by creating lock files in _/tmp_ of the form _\usr\spool\mail\joe. _The system call _flock()_ is then used on these files; the existence of the file alone does not constitute a lock. This lock is created when the folder is opened and destroyed when it is closed. When the folder is actually being written, the standard UNIX locks are also created. If a folder is modified by some other program while _Pine_ has it open, _Pine_ will give up on that mail file, concluding it's best not to do any further reads or writes. This can happen if another mailer that doesn't observe _Pine_'s user-contention locks (e.g. _elm_ or _mail)_ is run while _Pine_ has the mail folder open. _Pine_ checkpoints files every few minutes, so little data can be lost in these situations. _PC-Pine_ does not do any folder locking. It depends on IMAP servers to handle locking of remote folders. It is assumed that only one _Pine_ session can be running on the PC at a time, so there is no contention issue around folders on the PC itself. _________________________________________________________________ INBOX and Special Folders The _INBOX_ folder is treated specially. It is normally kept open constantly so that the arrival of new mail can be detected. The name _INBOX_ refers to wherever new mail is retrieved on the system. If the inbox-path variable is set, then _INBOX_ refers to that. IMAP servers understand the concept of _INBOX_, so specifying the folder _{imap.u.example.edu}INBOX_ is meaningful. The case of the word _INBOX_ is not important, but _Pine_ tends to display it in all capital letters. The folders for sent mail and saved messages folders are also somewhat special. They are automatically created if they are absent and recreated if they are deleted. _________________________________________________________________ Internal Help Files The file pine.hlp in the pine subdirectory of the distribution contains all the help text for _Pine_. On UNIX, it is compiled right into the _Pine_ binary as strings. This is done to simplify installation and configuration. The pine.hlp file is in a special format that is documented at the beginning of the file. It is divided into sections, each with a name that winds up being referenced as a global variable. This file is processed by two awk scripts and turned into C files that are compiled into _Pine_. _PC-Pine_, which tries to run on machines with as little as 640k of memory, leaves the _Pine_ help text out of the executable. PINE.EXE, PINE.HLP, and PINE.NDX are all needed for _PC-Pine_'s help system. _________________________________________________________________ International Character Sets While _Pine_ was designed in the U.S. and used mostly for English-language correspondence, it is a goal for _Pine_ to handle email in almost any language. Many sites outside of the U.S. run _Pine_ in their native language. The default character set for _Pine_ is US-ASCII. That can be changed in the personal or system-wide configuration file with the variable character-set. When reading incoming email, _Pine_ allows all character sets to pass through. _Pine_ doesn't actually display the characters but simply passes them through; it is up to the actual display device to show the characters correctly. When composing email, _Pine_ will accept input in any language and tag the message according to the _character-set_ variable. Again, it is up to the input device to generate the correct sequences for the character set being used. With the exception of UNICODE-1-1-UTF-7, the outgoing message is checked to see if it is all US-ASCII text (and contains no escape characters). In that case, the text will be labeled as US-ASCII even if the _character-set_ variable is set to something else. The theory is that every reasonable character set will have US-ASCII as a subset, and that it makes sense to label the text with the lowest-common-denominator label so that more mailers will be able to display it. Text in the UNICODE-1-1-UTF-7 character set is never re-labeled as US-ASCII. If the outgoing message is not all US-ASCII text, then it will be labeled with the _character-set_ variable set by the user. If the user has not set the _character-set_ variable then it will be labeled as _X-UNKNOWN_. _BUG_: If you prepare a UNICODE-1-1 document and read it into the composer with _^R_, _Pine_ may mistreat it. If your document, when misviewed as 8-bit bytes, does not contain any individual bytes greater than 0x7f base 16, then _Pine_ will re-label your outgoing message as US-ASCII, even if your message is really in Unicode Cyrillic, Arabic, or Thai. On the other hand, if your UNICODE-1-1, when misviewed as 8-bit bytes, does contain at least one individual byte greater than 0x7f base 16, as is likely for Unicode French/German/Spanish, Greek, Japanese, and Chinese, then _Pine_ will retain the UNICODE-1-1 label. The character sets are: US-ASCII Standard 7 bit English characters ISO-8859-1 8 bit European "latin 1" character set ISO-8859-2 8 bit European "latin 2" character set ISO-8859-3 8 bit European "latin 3" character set ISO-8859-4 8 bit European "latin 4" character set ISO-8859-5 8 bit Latin and Cyrillic ISO-8859-6 8 bit Latin and Arabic ISO-8859-7 8 bit Latin and Greek ISO-8859-8 8 bit Latin and Hebrew ISO-8859-9 8 bit European "latin 5" character set ISO-8859-10 8 bit European "latin 6" character set KOI8-R 8 bit Latin and Russian VISCII 8 bit Latin and Vietnamese ISO-2022-JP Latin and Japanese ISO-2022-KR Latin and Korean UNICODE-1-1 Unicode UNICODE-1-1-UTF-7 Mail-safe Unicode ISO-2022-JP-2 Multilingual Earlier versions of _Pine_ made use of the character set tags associated with text in MIME to decide if the text should be displayed or not. Depending on the character set tag and the _character-set_ variable in _Pine_, the text was either displayed as is, displayed with some characters filtered out, or not displayed at all. The current version uses a much simpler algorithm in order to maximize the chance that useful contents are readable by the user. It simply displays _all_ messages of type text and makes no attempt to filter out characters that may be in the wrong character set. If the text is tagged as something other than US-ASCII and the tag does not match the character set that the _character-set_ variable is set to, then an attempt is made to convert the incoming characters into the character set given in the _character-set_ variable. Characters which are not representable in the character set of the display will be converted to question marks. The feature disable-charset-conversions may be used to turn off this automatic conversion. A warning is printed at the start of the message and the characters are sent to the display. It is possible that the text will be displayed incorrectly. There is special-case code which attempts to handle Japanese text (ISO-2022-JP). Incoming ISO-2022-JP text will be converted to EUC in UNIX _Pine_ and to Shift-JIS in _PC-Pine_ before it is sent to the display. Conversely, when sending mail UNIX _Pine_ will convert EUC into ISO-2022-JP and _PC-Pine_ will convert Shift-JIS into ISO-2022-JP. The feature disable-2022-jp-conversions may be used to turn off this automatic conversion. There used to be a facility in _PC-Pine_ to map between various DOS Code Pages and standard character sets. That facility, including the _CP_TO_ISO_ and _ISO_TO_CP_ hooks, was broken for several versions of _Pine_ and is now entirely removed. We hope that the character set conversion that happens automatically before displaying a message will handle most of what the Code Page code used to do. For example, a Russian user would probably set the _character-set_ variable in the PINERC file to the value KOI8-R. That would cause outgoing messages to be labeled as KOI8-R. If an incoming message was labeled with the Windows-1251 character set, _Pine_ should be able to convert the Windows-1251 characters to KOI8-R before sending them to the display. _________________________________________________________________ Interrupted and Postponed Messages If the user is composing mail and is interrupted by being disconnected (SIGHUP, SIGTERM or end of file on the standard input), _Pine_ will save the interrupted composition and allow the user to continue it when he or she resumes _Pine_. As the next _Pine_ session starts, a message will be given that an interrupted message can be continued. To continue the interrupted message, simply go into the composer. To get rid of the interrupted message, go into the composer and then cancel the message with _^C._ Composition of half-done messages may be postponed to a later time by giving the _^O_ command. Other messages can be composed while postponed messages wait. All of the postponed messages are kept in a single folder. Postponing is a good way to quickly reference other messages while composing. _________________________________________________________________ Message Status The c-client library allows for several flags or status marks to be set for each message. _Pine_ uses four of these flags: UNSEEN, DELETED, ANSWERED, and FLAGGED. The N in _Pine_'s FOLDER INDEX means that a message is unseen-it has not been read from this folder yet. The D means that a message is marked for deletion. Messages marked with D are removed when the user _Expunges_ the folder (which usually happens when the folder is closed or the user quits _Pine_). The A in _Pine_'s FOLDER INDEX means that the message has been replied-to. The * in _Pine_'s FOLDER INDEX means that the message has been ``flagged'' as important. That is, the user used the _Flag_ command to turn the FLAGGED flag on. This flag can mean whatever the user wants it to mean. It is just a way to mark some messages as being different from others. It will usually probably be used to mark a message as somehow being ``important''. For Berkeley format folders, the message status is written into the email folder itself on the header lines marked Status: and X-Status. In Tenex and _PC-Pine_'s MTX folder formats, the status goes into the 36-bit octal flags. _________________________________________________________________ MIME: Reading a Message _Pine_ should be able to handle just about any MIME message. When a MIME message is received, _Pine_ will display a list of all the parts, their types and sizes. It will display the attachments when possible and appropriate and allow users to _Save_ all other attachments. Starting with version 3.90, _Pine_ honors the "mailcap" configuration system for specifying external programs for handling attachments. The mailcap file maps MIME attachment types to the external programs loaded on your system which can display and/or print the file. A sample mailcap file comes bundled with the _Pine_ distribution. It includes comments which explain the syntax you need to use for mailcap. With the mailcap file, any program (mail readers, newsreaders, WWW clients) can use the same configuration for handling MIME-encoded data. If a MAILCAPSenvironment variable is defined, _Pine_ will use that to look for one or more mailcap files, which are combined. In the absence of MAILCAPS, Unix _Pine_ will look for a personal mailcap file in ~/.mailcap and combine that with a system-wide file in /etc/mailcap. _PC-Pine_ will look for a file named MAILCAP in the same directory as the PINERC file, and/or the directory containing the PINE.EXE executable. Messages which include _rich text_ or _enriched text_ in the main body will be displayed in a very limited way (it will show bold and underlining). If _Pine_ sees a MIME message part tagged as type IMAGE, and _Pine_'s image-viewer configuration variable is set, _Pine_ will attempt to send that attachment to the named image viewing program. In the case of UNIX _Pine_, the DISPLAY environment variable is checked to see if an X-terminal is being used (which can handle the images). If the _image-viewer_ variable is not set, _Pine_ uses the _mailcap_ system to determine what to do with IMAGE types, just as it does for any other non-TEXT type, e.g. type APPLICATION. For MIME's generic "catch all" type, APPLICATION/OCTET-STREAM, the _mailcap_ file will probably not specify any action, but _Pine_ users may always _Save_ any MIME attachment to a file. MIME type "text/plain" is handled a little bit differently than the other types. If you are viewing the main body part in the MESSAGE TEXT viewing screen, then _Pine_ will use its internal viewer to display it. This happens even if there is a mailcap description which matches this particular type. If it is labeled as having a character set other than the one you are using, it will still be displayed by the internal viewer (perhaps incorrectly), though you will get a warning message prepended to the message in the viewing screen. However, if you view a part of type "text/plain" from the ATTACHMENT INDEX screen, then _Pine_ will check the mailcap database for a matching entry and use it in preference to its internal viewer. Some text attachments, specifically those which are just other email messages forwarded as MIME messages, are displayed as part of the main body of the message. This distinction allows easy display when possible (the forward as MIME case) and use of an attachment viewer when that is desirable (the plain text file attachment case). If the parts of a multipart message are alternate versions of the same thing _Pine_ will select and display the one best suited. For parts of type "message/external-body", the parameters showing the retrieval method will be displayed, and the retrieval process is automated. Messages of type "message/partial" are not currently supported. _________________________________________________________________ MIME: Sending a Message There are two important factors when trying to include an attachment in a message: encoding and labeling. _Pine_ has rules for both of these which try to assure that the message goes out in a form that is robust and can be handled by other MIME mail readers. MIME has two ways of encoding data-Quoted-Printable and Base64. Quoted-Printable leaves the ASCII text alone and only changes 8-bit characters to "=" followed by the hex digits. For example, "=09" is a tab. It has the advantage that it is mostly readable and that it allows for end of line conversions between unlike systems. Base64 encoding is similar to _uuencode_ or _btoa_ and just encodes a raw bit stream. This encoding is designed to get text and binary files through even the most improperly implemented and configured gateways intact, even those that distort uuencoded data. _All_ attachments are encoded using Base64 encoding. This is so that the attachment will arrive at the other end looking exactly like it did when it was sent. Since Base64 is completely unreadable except by MIME-capable mailers or programs, there is an obvious tradeoff being made here. We chose to ensure absolutely reliable transport of attachments at the cost of requiring a MIME-capable mailer to read them. If the user doesn't want absolute integrity he or she may always _include_ text (with the _^R_ command) in the body of a message instead of attaching it. With this policy, the only time quoted-printable encoding is used is when the main body of a message includes special foreign language characters. When an attachment is to be sent, _Pine_ sniffs through it to try to set the right label (content-type and subtype). An attachment with any lines longer than 500 characters in it or more than 10% of the characters are 8-bit it will be considered binary data. _Pine_ will recognize (and correctly label) a few special types including GIF, JPEG, PostScript, and some audio formats. Another method which can be more robust and flexible for determining the content-type and subtype is to base it on the file extension. This method uses a MIME.Types File. If it is not binary data (has only a small proportion of 8-bit characters in it,) the attachment is considered 8-bit text. 8-bit text attachments are labeled "text/plain" with charset set to the value of the user's _character-set_ variable. If an attachment is ASCII (no 8-bit characters) and contains no _ESCAPE, ^N, _or _^O_ characters (the characters used by some international character sets), then it is considered plain ASCII text. Such attachments are given the MIME label "text/plain; charset=US-ASCII", regardless of the setting of the user's _character-set_ variable. All other attachments are unrecognized and therefore given the generic MIME label "application/octet-stream". _________________________________________________________________ New Mail Notification _Pine_ checks for new mail in the _INBOX_ and in the currently open folder every two and a half minutes by default. It used to be 30 seconds instead of 150 seconds, but we increased it in order to reduce the load on large systems with lots of _Pine_ users. The value can be changed at compile-time in the pine/os.h file. This value can be changed with the variable mail-check-interval. A new mail check can be forced by redrawing the screen with a _^L_. When there is new mail, the message(s) will appear in the index, the screen will beep, and a notice showing the sender and subject will be displayed. If there has been more than one new message since you last issued a command to _Pine_, the notice will show the count of new messages and the sender of the most recent one. Questions have arisen about the interaction between _Pine_ and external mail notification routines (biff, csh, login). Firstly and unfortunately, we have found no PC based program that will check for email on an IMAP server when _PC-Pine_ is not running. If you find one, please tell us. The UNIX case is more complicated. _Pine_ sets the modification and access time on a file every time it performs a write operation (status change or expunge). You need to see which of these your email notification program is looking at to know how it will behave with _Pine_. _________________________________________________________________ NFS It is possible to access mail folders on _NFS_ mounted volumes with _Pine_, but there are some drawbacks to doing this, especially in the case of incoming-message folders that may be concurrently updated by _Pine_ and the system's mail delivery agent. One concern is that _Pine_'s user-contention locks don't work because _/tmp_ is usually not shared, and even if it was, _flock()_ doesn't work across _NFS._ The implementation of the standard UNIX ".lock" file locking has been modified to work with _NFS_ as follows. Standard hitching post locking is used so first a uniquely named file is created, usually something like _xxxx.host.time.pid._ Then a link to it is created named _xxxx.lock_ where the folder being locked is _xxxx._ This file constitutes the lock. This is a standard UNIX locking scheme. After the link returns, a _stat(2)_ is done on the file. If the file has two links, it is concluded that the lock succeeded and it is safe to proceed. In order to minimize the risks of locking failures via _NFS_, we strongly recommend using IMAP rather than _NFS_ to access remote incoming message folders, e.g. your _INBOX_. However, it is generally safe to access personal saved-message folders via _NFS_ since it is unlikely that more than one process will be updating those folders at any given time. Still, some problems may occur when two _Pine_ sessions try to access the same mail folder from different hosts without using IMAP. Imagine the scenario: _Pine_-A performs a write that changes the folder. _Pine_-B then attempts to perform a write on the same folder. _Pine_-B will get upset that the file has been changed from underneath it and abort operations on the folder. _Pine_-B will continue to display mail from the folder that it has in its internal cache, but it will not read or write any further data. The only thing that will be lost out of the _Pine_-B session when this happens is the last few status changes. If other mail readers besides _Pine_ are involved, all bets are off. Typically, mailers don't take any precautions against a user opening a mailbox more than once and no special precautions are taken to prevent _NFS_ problems. _________________________________________________________________ Printers and Printing UNIX _Pine_ can print to the standard UNIX line printers or to generic printers attached to ANSI terminals using the escape sequences to turn the printer on and off. The user has a choice of three printers in the configuration. The first setting, _attached-to-ansi_, makes use of escape sequences on ANSI/VT100 terminals. It uses "[5i" to begin directing all output sent to the terminal to the printer and then "[4i" to return to normal. _Pine_ will send these escape sequences if the printer is set to _attached-to-ansi._ This works with most ANSI/VT100 emulators on Macs and PCs such as kermit, NCSA telnet, VersaTerm Pro, and WinQVT. Various terminal emulators implement the print feature differently. For example, NCSA telnet requires "capfile = PRN" in the _config.tel_ file. Attached-to-ansi printing doesn't work at all with the telnet provided with PC-NFS. There is also a closely related method called _attached-to-ansi-no-formfeed_ which is the same except for the lack of formfeed character at the end of the print job. _Attached-to-wyse_ and _attached-to-wyse-no-formfeed_ are very similar to "attached-to-ansi". The only difference is in the control characters sent to turn the printer on and off. The Wyse version uses Ctrl-R for on, and Ctrl-T for off. The second selection is the standard UNIX print command. The default is _lpr_, but it can be changed on a system basis to anything so desired in /usr/local/lib/pine.conf. The third selection is the user's personal choice for a UNIX print command. The text to be printed is piped into the command. _Enscript_ or _lpr_ with options are popular choices. The actual command is retained even if one of the other print selections is used for a while. Both the second and third sections are actually lists of possible commands rather than single commands. If you have a PostScript printer attached to a PC or Macintosh, then you will need to use a utility called _ansiprt_ to get printouts on your printer. _Ansiprt_ source code and details can be found in the ./contrib directory of the _Pine_ distribution. The three printer choices are for UNIX _Pine_ only. _PC-Pine_ can only print to the locally attached printer. All printing on _PC-Pine_ is done via ROM BIOS Print Services (Int 17h). After verifying the existence of a local printer via the BIOS Equipment-List Service (Int 11h), it simply sends the message text, character by character, to the first printer found using ASCII CR and LF at the end of lines and followed by an ASCII FF. Note, some system adjustments using the PC's "MODE" command may be required if the printer is not on the first parallel port. _PC-Pine_ cannot generate PostScript, so printing to exclusively PostScript printers does not work. _PC-Pine_ for Winsock uses the MS-Windows printer interface. A _Pine_ print command will bring up a standard MS-Windows printer dialog box. _________________________________________________________________ Save and Export _Pine_ users get two options for moving messages in _Pine_: _Save_ and _Export_. _Save_ is used when the message should remain ``in the _Pine_ realm.'' Saved messages include the complete header (including header lines normally hidden by _Pine_), are placed in a _Pine_ folder collection and accumulate in a standard folder format which _Pine_ can read. In contrast, the _Export_ command is used to write the contents of a message to a file for use outside of _Pine_. Messages which have been exported are placed in the user's home directory (unless the feature use-current-dir is turned on), not in a _Pine_ folder collection. Unless FullHeaderMode is toggled on, all delivery-oriented headers are stripped from the message. Even with _Export_, _Pine_ retains message separators so that multiple messages can accumulate in a single file and subsequently be accessed as a folder. On UNIX systems, the _Export_ command pays attention to the standard _umask_ for the setting of the file permissions. _________________________________________________________________ Sent Mail _Pine_'s default behavior is to keep a copy of each outgoing message in a special "sent mail" folder. This folder is also called the fcc for "file carbon copy". The existence, location and name of the sent mail folder are all configurable. Sent mail archiving can be turned off by setting the configuration variable default-fcc="". The sent mail folder is assumed to be in the default collection for _Save_s, which is the first collection named in folder-collections. The name of the folder can be chosen by entering a name in _default-fcc_. With _PC-Pine_, this can be a bit complicated. If the default collection for _Save_s is local (DOS), then the _default-fcc_ needs to be SENTMAIL, which is syntax for a DOS file. However, if the default collection for _Save_s is remote, then the _default-fcc_ needs to be sent-mail to match the UNIX syntax. The configuration variable fcc-name-rule also plays a role in selecting the folder to save sent mail in. A danger here is that the sent mail could grow without bound. For this reason, we thought it useful to encourage the users to periodically prune their sent mail folder. The first time _Pine_ is used each month it will offer to archive all messages sent from the month before. _Pine_ also offers to delete all the sent mail archive folders which are more than 1 month old. If the user or system has disabled sent mail archiving (by setting the configuration variable _default-fcc=""_) there will be no pruning question. _________________________________________________________________ Spell Checker Spell checking is available for UNIX _Pine_ only. We could not find an appropriate PC based spell checker to hook into _PC-Pine_. Even UNIX _Pine_ depends on the system for its spell checking and dictionary. _Pico_, the text editor, uses the same spell checking scheme as _Pine_. Lines beginning with ">" (usually messages included in replies) are not checked. The message text to be checked is on the standard input and the incorrect words are expected on the standard output. The default spell checker is UNIX _spell_. You can replace this by setting the speller configuration variable. _Pine_ also respects the environment variable SPELL. The spelling checker reads its words from a standard dictionary on the system. Below is a description, contributed by Bob Hurt, of how you can create your own personal dictionary with additional ``correct'' words. Step 1: Make a file with all the words you want to include in your new dictionary. I did mine with one word per line in alphabetical order. Caps don't matter at all, as far as I know. Step 2: At the UNIX prompt, type "cat [word file] | spellin /usr/dict/hlista > [new dict name]" where [word file] is the file you just created and [new dict name] is the name of the new dictionary that _Pine_ will look at instead of the standard _/usr/dict/hlista._ I named my word file _.bobwords_ and my dictionary _.bobspell_ so I don't have to see them when I do a _ls_ command (_ls_ doesn't list "dot" files). I also put the above command into my _.alias_ file as the command _makedict_ so I can add a word to my word file and easily recreate my dictionary. NOTE: the new dictionary is in something called a "hashed" format, and can't be read normally. Step 3: Check your new dictionary. At the UNIX prompt, type "cat [word file] | spellout [new dict name]" If you did everything correctly, it should just give you another prompt. If it lists any of the words in your file, something is wrong. I can try to help if all else fails. Step 4: Now you have to tell UNIX to use your dictionary instead of the standard one by setting the environment variable _SPELL_ to access your dictionary. Go into your _.login_ or _.cshrc_ file in your home directory (it doesn't seem to make a difference which one you use) and add the line setenv SPELL "spell -d [new dict name]" I also created an alias for _SPELL_ in my _.alias_ file so I can use the UNIX _spell_ command to spell-check a file outside of _Pine_. (The _.alias_ line is: alias spell 'spell -d [new dict name]') Step 5: Now you need to logoff and log back on to let UNIX look at your _.login_ (or _.cshrc_) file. Here is an alternative method suggested by Zachary Leber: Create a list (e.g. _.zachwords_) with the upper case followed by lower case words, sorted alphabetically. Add this line to _.cshrc_: setenv SPELL 'spell +/home/ie/rsa/.zachwords' The limitation here is that the path must be absolute (e.g. _+~/.zachwords_ doesn't work). My man pages for spell show this + flag to be an easy way to do the exception list. This way you don't have to bother with hash lists or rehashing, and it seems to work across several platforms. _________________________________________________________________ Terminal Emulation and Key Mapping _Pine_ has been designed to require as little as possible from the terminal. At the minimum, _Pine_ requires cursor positioning, clear to end of line, and inverse video. Unfortunately, there are terminals that are missing some of these such as a vt52. _Pine_ makes no assumptions as to whether the terminal wraps or doesn't wrap. If the terminal has other capabilities it may use some of them. _Pine_ won't run well on older terminals that require a space on the screen to change video attributes, such as the Televideo 925. One can get around this on some terminals by using "protected field" mode. The terminal can be made to go into protected mode for reverse video, and then reverse video is assigned to protected mode. _Pine_ handles screens of most any size and resizing on the fly. It catches SIGWINCH and does the appropriate thing. A screen one line high will display only the new mail notification. Screens that are less than ten columns wide don't format very nicely or work well, but will function fine again once resized to something large. _Pine_ sets an internal maximum screen size (currently 170x200) and decides to use either _termcap_ or _terminfo_ when it is compiled. On the input side of things, _Pine_ uses all the standard keys, most of the control keys and (in function-key mode) the function keys. _Pine_ avoids certain control keys, specifically ^S, ^Q, ^H, and _^\_ because they have other meanings outside of _Pine_ (they control data flow, etc.) _^H_ is treated the same as the _delete_ key, so the _backspace_ or _delete_ keys always works regardless of any configuration. There is a feature _compose-maps-delete-key-to-ctrl-d_ which makes the delete key behave like ^D rather than ^H (deletes current character instead of previous character). Sometimes a communications program or communications server in between you and the other end will eat certain control characters. There is a work-around when you need it. If you type two escape characters followed by a character that will be interpreted as the character with the control key depressed. For example, _ESC ESC T_ is equivalent to _^T_. When a function key is pressed and _Pine_ is in regular (non-function key) mode, _Pine_ traps escape sequences for a number of common function keys so users don't get an error message or have an unexpected command executed for each character in the function key's escape sequence. _Pine_ expects the following escape sequences from terminals defined as VT100: ANSI/VT100 F1: OP F2: OQ F3: OR F4: OS F5: Op F6: Oq F7: Or F8: Os F9: Ot F10: Ou F11: Ov Arrow keys are a special case. _Pine_ has the escape sequences for a number of conventions for arrow keys hard coded and does not use _termcap_ to discover them. This is because _termcap_ is sometimes incorrect, and because many users have PC's running terminal emulators that don't conform exactly to what they claim to emulate. In some versions of _Pine_ before 4.00 there was a compile-time macro called TERMCAP_WINS which could be set to cause the _termcap_ or _terminfo_ definitions to be used instead of the built in definitions. Beginning with 4.00 there is a hidden runtime feature which can be turned on to accomplish the same thing. The feature is called termdef-takes-precedence and it can be set in any of the _Pine_ configuration files. Some arrow keys on old terminals send single control characters like _^K_ (one even sends _^\_). These arrow keys will not work with _Pine_. The most popular escape sequences for arrow keys are: Up: [A ?x A OA Down: [B ?r B OB Right: [C ?v C OC Left: [D ?t D OD It is possible to configure an NCD X-terminal so that some of the special keys operate. Brad Greer contributes these instructions: 1. In your _.Xdefaults_ file, include the following "translations", using lower hex values: Pine*VT100.Translations: #override \n\ Delete: string(0x04) \n\ End: string(0x05) \n\ Escape: string(0x03) \n\ Home: string(0x01) \n\ Next: string(0x16) \n\ Prior: string(0x19) \n\ KP_Enter: string(0x18) \n\ 2. Start up _Pine_ from an _xterm,_ and specify a "resource name". This resource name will allow the user to specify resources for _Pine_ (that deviate from the defaults). For example, _xterm -name Pine -e pine &_ (the resource name _Pine_ corresponds to the translations just added in the _.Xdefaults_ file). Notes for Porting and Modification Porting Pine to Other Platforms Substantial effort has gone into making _Pine_/_Pico_ portable. There are still, of course, a number of machine dependencies. Some of the ports are well-tested and some are untested. In particular, the most heavily used ports are the Ultrix, AIX, NeXT, Windows, and Dec Unix ports. Each platform is given a three letter name (see the file doc/pine-ports). Make up a new one for your new port. We've attempted to bring all potential platform dependencies into the files: {pico,pine}/osdep/os-xxx.h, {pico,pine}/osdep/os-xxx.ic, and {pico,pine}/makefile.xxx, where _xxx_ is the three letter name of the port. Thus any new port will hopefully just result in new versions of these files and some notes for the _pine-ports_ file. There are separate dependencies in the c-client source, but that is handled in separate documentation there. Regrettably, the source code is also full of instances of _ifdef DOS_. Most of these are due to memory limit problems on _DOS_ as opposed to actual system dependencies. The makefiles are kept as simple and straight-forward as possible, because many previous attempts at automatically figuring out what to do seem to have become complex and ineffective in what they set out to do: which is to make compiling and installing the program easy. Each port is for a specific hardware/software platform, also because past attempts to generalize on versions of Unix or some CPU architecture don't seem to have gained much. Thus, there is a separate makefile for each platform that calls the appropriate compiler and linker with the appropriate flags. Most of these makefiles are pretty similar. The makefile also specifies which of the _os-xxx.c_ and _os-xxx.h_ files to use. It is the root from which most platform dependencies are selected. In most cases the makefile also defines a symbol named after the platform on which there can be dependencies in the source code, though we've tried to minimize relying on this where reasonable. When different "ports" are very similar, it is sometimes possible to use the same pine code (for example) with only a small change in the c-client or pico code. In those cases, that kind of dependency is reflected in the top-level _build_ script. The _build_ script can usually be used to invoke the various makes correctly. It may set some variables before running make so look to see what _build_ does before trying a make in one of the subdirectories. This is especially true if LDAP is being included. It is almost always easier to start with an existing port when trying to port to a new system. There is a port called _gen_ (generic) which may be a good starting point. On the other hand, if another port is close to what you want, start with it instead. The file pico/osdep/os-xxx.h contains most of the general platform dependent _#include_'s and _#defines_. There are a number of _Pine_ configuration settings that are defined in pine/osdep/os-xxx.h, as well, such as the place it looks for certain files, defaults for the printer and folder names, the maximum screen size, and so on. Start by looking at the generic pico/osdep/os-gen.h file and comparing it to some of the specific os-xxx.h files there. The osdep/os-xxx.c files contain functions that are potentially platform dependent. Again, the idea is to gather all the dependencies in one place. We use a complicated looking method to produce the _os-xxx.c_ files from a set of included files. Each included file usually contains a single implementation method and we've found that there are usually only two or three different methods in the ports we've done so far. Hopefully, coming up with an os-xxx.c for a new port will usually be a matter of including the right set of these already written functions. This is done by writing a new os-xxx.ic file in the osdep subdirectories. Starting with the generic os-gen.ic, as you did with the os-gen.h file above, may be a useful strategy. We strongly encourage that no changes be made to the general source when porting and that all changes be contained in the system dependent files if possible. The object is to maintain source code integrity and assimilate ports to new platforms rapidly. The more conventional way to do this is with a large collection of _#ifdefs_. The problem with this is that adding a port for a new platform implies changing the source code for all the other platforms and thereby risks breaking them. (We readily admit that there are still too many _ifdefs_ in the code.) If you do port _Pine_ to a new platform we hope that you will send us the changes required so that we may attempt to include it in a later release. Thanks! _________________________________________________________________ Test Checklist The following is a checklist of some things to check when testing a new port: ___ Sending mail, check that headers are correct ___ Sending mail with attachments ___ Sending mail with SMTP server ___ Sending mail without SMTP server ___ Sending mail with list of two SMTP servers, first one doesn't answer ___ Replying to and forwarding a message ___ Postponing messages under composition ___ Composer operations ___ Alternate editor, _enable-alternate-editor-implicitly_ ___ Make sure local user names are expanded ___ Test spelling checker ___ Catching of SIGHUP while message is being composed ___ Setting of variables in .pinerc ___ New mail notification. Should happen with _Pine_ idle to check timeouts ___ Reading mail (attachments, MIME, MIME with mailcap viewers) ___ Deleting, undeleting, expunging, sorting ___ Expunge to empty folder ___ Make sure that _~_ expansion works in config files ___ Make sure that $VAR expansion works in config files ___ Save message to folder, check error conditions such as permission denied ___ Export message with FullHeaderMode on and off ___ Checkpointing (see the section on checkpointing) ___ Open IMAP and RIMAP folders ___ Default-fcc on remote IMAP server ___ Fcc-name-rule, fcc in addrbook (while composing) ___ Test opening bogus folders: invalid format, no permission ___ Open a USENET news group, list in folder-lister, read news, post news ___ Command line arguments ___ Change password ___ Lock keyboard ___ Address book operations (edit, delete, add, lists, whereis, composeto) ___ ReadOnly address book ___ Look at addrbook, change addrbook-sort-rule in Config, go back to addrbook screen ___ No permission to write in same directory as addrbook, should create addrbook.lu in a temp directory ___ Multiple address books ___ Address book loops from one addrbook to another and back ___ TakeAddr command with one address, with multiple addresses ___ TakeAddr command with ReadOnly address books ___ TakeAddr command with one of two address books ReadOnly ___ Send mail with empty address book ___ Config Screen operation, does pinerc get written? ___ Make sure SIGTSTP, ^Z works ___ Sent-mail pruning (set back _last-time-prune-questioned_ variable) ___ Printing using all three printer configurations, various screens ___ View help text and news ___ Folder list operations (rename, create, delete...) ___ Saved-msg-name-rule ___ Screen redrawing in various screens (^L) ___ Window resizing in various screens ___ Error messages for incorrect terminal types (try "foo" and "vt52") ___ Reading of /usr/local/lib/pine.conf ___ Fixing variables and features in /usr/local/lib/pine.conf.fixed ___ Flag command (check message status changed in mail folder) ___ Initial-keystroke-list ___ Aggregate operations (save, delete, export, takeaddr, ...) ___ Build xxx from scratch, build clean